maple/istoreos
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

add Cyber Cyber3588 AIB support (#2641)

Browse Source 
Signed-off-by: kylin7226 <kylin_fedora@outlook.com>
Co-authored-by: Liangbin Lian <1129525450@qq.com>
This commit is contained in:
kylin7226 2025-08-30 20:06:36 +08:00 committed by Liangbin Lian
parent c8ee4d2a2d
commit 13b67084e1
5 changed files with 875 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
target/linux/rockchip/armv8/base-files/etc/board.d/01_leds
View File

@ -8,6 +8,10 @@ boardname="${board##*,}"
board_config_update
case $board in
cyber,cyber3588-aib)
ucidef_set_led_netdev "wan" "WAN" "blue:status" "eth0"
ucidef_set_led_netdev "lan" "LAN" "green:status" "eth1"
;;
friendlyarm,nanopi-r2c|\
friendlyarm,nanopi-r2c-plus|\
friendlyarm,nanopi-r2s|\

1
target/linux/rockchip/armv8/base-files/etc/board.d/02_network
View File

@ -7,6 +7,7 @@ rockchip_setup_interfaces()
local board="$1"
case "$board" in
cyber,cyber3588-aib|\
armsom,sige7|\
easepi,ars4|\
lunzn,fastrhino-r66s|\

14
target/linux/rockchip/armv8/base-files/lib/board/init.sh
View File

@ -179,16 +179,9 @@ board_fixup_iface_name() {
rename_iface lan2 eth2
fi
;;
cyber,cyber3588-aib)
device="$(get_iface_device eth1)"
if [[ "$device" = "0004:*1:00.0" ]]; then
rename_iface eth1 lan2
rename_iface eth2 eth1
rename_iface lan2 eth2
fi
;;
armsom,sige7|\
armsom,sige7-v1)
armsom,sige7-v1|\
cyber,cyber3588-aib)
device="$(get_iface_device eth1)"
if [[ "$device" = "0004:*1:00.0" ]]; then
rename_iface eth1 wan
@ -304,7 +297,8 @@ board_set_iface_smp_affinity() {
fi
;;
armsom,sige7|\
armsom,sige7-v1)
armsom,sige7-v1|\
cyber,cyber3588-aib)
if ethtool -i eth0 | grep -Fq 'driver: r8169'; then
set_iface_cpumask 4 "eth0"
set_iface_cpumask 8 "eth1"

858
target/linux/rockchip/dts/rk3588/rk3588-cyber3588-aib.dts Normal file
View File

@ -0,0 +1,858 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/pwm/pwm.h>
#include <rockchip/rk3588.dtsi>
#include "rk3588-rk806-single.dtsi"
#include "rk3588s-ip.dtsi"
#include "rk3588s-ip-supply.dtsi"
/ {
model = "Cyber 3588 AIB";
compatible = "cyber,cyber3588-aib", "rockchip,rk3588";
aliases {
mmc0 = &sdhci;
mmc1 = &sdmmc;
led-boot = &led_status_red;
led-failsafe = &led_status_red;
led-running = &led_status_blue;
led-upgrade = &led_status_green;
};
leds {
compatible = "gpio-leds";
led_status_red: status-red {
label = "red:status";
gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
};
led_status_green: status-green {
label = "green:status";
gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
};
led_status_blue: status-blue {
label = "blue:status";
gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
};
};
ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_out_pin>;
};
pwm-fan {
compatible = "pwm-fan";
cooling-levels = <100 150 200 255>;
fan-supply = <&vcc12v_dcin>;
interrupt-parent = <&gpio1>;
interrupts = <RK_PB7 IRQ_TYPE_EDGE_RISING>;
pwms = <&pwm1 0 10000 PWM_POLARITY_INVERTED>;
#cooling-cells = <2>;
};
rfkill-wlan {
compatible = "rfkill-gpio";
label = "rfkill-pcie-wlan";
radio-type = "wlan";
shutdown-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
};
rfkill-modem {
compatible = "rfkill-gpio";
label = "rfkill-modem";
radio-type = "wwan";
reset-gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
};
vcc12v_dcin: vcc12v-dcin {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3 {
compatible = "regulator-fixed";
regulator-name = "vcc_1v1_nldo_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
vin-supply = <&vcc5v0_sys>;
};
vcc3v3_pcie: vcc3v3-pcie {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
regulator-name = "vcc3v3_pcie";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <5000>;
vin-supply = <&vcc12v_dcin>;
};
vcc3v3_sd: vcc3v3-sd {
compatible = "regulator-fixed";
gpio = <&gpio4 RK_PB4 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sd_pwren>;
regulator-boot-on;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "vcc3v3_sd";
vin-supply = <&vcc_3v3_s3>;
};
vcc4v0_5g: vcc4v0-5g {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
regulator-name = "vcc4v0_5g";
regulator-min-microvolt = <4000000>;
regulator-max-microvolt = <4000000>;
vin-supply = <&vcc12v_dcin>;
};
vcc5v0_sata: vcc5v0-sata {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&sata_power_en>;
regulator-name = "vcc5v0_sata";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_sys>;
};
vcc5v0_sys: vcc5v0-sys {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc12v_dcin>;
};
vbus5v0_usb: vbus5v0-usb {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vbus5v0_pwren>;
regulator-name = "vbus5v0_usb";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_sys>;
};
vbus_typec: vbus-typec {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&typec5v_pwren>;
regulator-name = "vbus5v0_typec";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_sys>;
};
};
&combphy0_ps {
status = "okay";
};
&combphy1_ps {
status = "okay";
};
&combphy2_psu {
status = "okay";
};
&cpu_b0 {
cpu-supply = <&vdd_cpu_big0_s0>;
};
&cpu_b1 {
cpu-supply = <&vdd_cpu_big0_s0>;
};
&cpu_b2 {
cpu-supply = <&vdd_cpu_big1_s0>;
};
&cpu_b3 {
cpu-supply = <&vdd_cpu_big1_s0>;
};
&cpu_l0 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l1 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l2 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l3 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&gpu {
mali-supply = <&vdd_gpu_s0>;
sram-supply = <&vdd_gpu_s0>;
status = "okay";
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0m2_xfer>;
status = "okay";
vdd_cpu_big0_s0: regulator@42 {
compatible = "rockchip,rk8602";
reg = <0x42>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu_big0_s0";
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <2300>;
regulator-boot-on;
regulator-always-on;
vin-supply = <&vcc5v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_big1_s0: regulator@43 {
compatible = "rockchip,rk8603", "rockchip,rk8602";
reg = <0x43>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu_big1_s0";
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <2300>;
regulator-boot-on;
regulator-always-on;
vin-supply = <&vcc5v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1m2_xfer>;
status = "okay";
vdd_npu_s0: vdd_npu_mem_s0: regulator@42 {
compatible = "rockchip,rk8602";
reg = <0x42>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_npu_s0";
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <2300>;
regulator-boot-on;
regulator-always-on;
vin-supply = <&vcc5v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
&i2c6 {
status = "okay";
usb-typec@22 {
compatible = "fcs,fusb302";
reg = <0x22>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&cc_int_l>;
vbus-supply = <&vbus_typec>;
};
};
&i2c8 {
pinctrl-names = "default";
pinctrl-0 = <&i2c8m1_xfer>;
status = "okay";
};
&i2s5_8ch {
status = "okay";
};
&i2s7_8ch {
status = "okay";
};
/* M.2 2280 SSD */
&pcie2x1l0 {
phys = <&pcie30phy>;
reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie>;
status = "okay";
};
/* RTL8125B_1 */
&pcie2x1l1 {
phys = <&pcie30phy>;
reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie>;
status = "okay";
};
/* RTL8125B_2 */
&pcie2x1l2 {
reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie>;
status = "okay";
};
&pcie30phy {
data-lanes = <1 3 2 4>;
status = "okay";
};
/* 5G modem */
&pcie3x2 {
num-lanes = <1>;
reset-gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc4v0_5g>;
status = "okay";
};
/* M.2 WiFi */
&pcie3x4 {
num-lanes = <1>;
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie>;
status = "okay";
};
&pinctrl {
ir {
ir_out_pin: ir-out-pin {
rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
sata {
sata_power_en: sata-power-en {
rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
mmc {
sd_pwren: sd-pwren {
rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
vbus5v0_pwren: vbus5v0-pwren {
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb-typec {
cc_int_l: cc-int-l {
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
};
typec5v_pwren: typec5v-pwren {
rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pwm1m1_pins>;
status = "okay";
};
&saradc {
vref-supply = <&vcc_1v8_s0>;
status = "okay";
};
&sata1 {
status = "okay";
sata-port@0 {
target-supply = <&vcc5v0_sata>;
};
};
&sdhci {
bus-width = <8>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
non-removable;
status = "okay";
};
&sdmmc {
bus-width = <4>;
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
max-frequency = <150000000>;
sd-uhs-sdr104;
vmmc-supply = <&vcc3v3_sd>;
vqmmc-supply = <&vccio_sd_s0>;
status = "okay";
};
&spi2 {
assigned-clocks = <&cru CLK_SPI2>;
assigned-clock-rates = <200000000>;
num-cs = <1>;
pinctrl-names = "default";
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
status = "okay";
pmic@0 {
compatible = "rockchip,rk806";
reg = <0x0>;
interrupt-parent = <&gpio0>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
spi-max-frequency = <1000000>;
system-power-controller;
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
vcc3-supply = <&vcc5v0_sys>;
vcc4-supply = <&vcc5v0_sys>;
vcc5-supply = <&vcc5v0_sys>;
vcc6-supply = <&vcc5v0_sys>;
vcc7-supply = <&vcc5v0_sys>;
vcc8-supply = <&vcc5v0_sys>;
vcc9-supply = <&vcc5v0_sys>;
vcc10-supply = <&vcc5v0_sys>;
vcc11-supply = <&vcc_2v0_pldo_s3>;
vcc12-supply = <&vcc5v0_sys>;
vcc13-supply = <&vcc_1v1_nldo_s3>;
vcc14-supply = <&vcc_1v1_nldo_s3>;
vcca-supply = <&vcc5v0_sys>;
gpio-controller;
#gpio-cells = <2>;
rk806_dvs1_null: dvs1-null-pins {
pins = "gpio_pwrctrl1";
function = "pin_fun0";
};
rk806_dvs2_null: dvs2-null-pins {
pins = "gpio_pwrctrl2";
function = "pin_fun0";
};
rk806_dvs3_null: dvs3-null-pins {
pins = "gpio_pwrctrl3";
function = "pin_fun0";
};
regulators {
vdd_gpu_s0: dcdc-reg1 {
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_gpu_s0";
regulator-enable-ramp-delay = <400>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_lit_s0: dcdc-reg2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_cpu_lit_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_log_s0: dcdc-reg3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <750000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_log_s0";
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <750000>;
};
};
vdd_vdenc_s0: dcdc-reg4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_vdenc_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_ddr_s0: dcdc-reg5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <900000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_ddr_s0";
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <850000>;
};
};
vdd2_ddr_s3: dcdc-reg6 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vdd2_ddr_s3";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_2v0_pldo_s3: dcdc-reg7 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-ramp-delay = <12500>;
regulator-name = "vdd_2v0_pldo_s3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <2000000>;
};
};
vcc_3v3_s3: dcdc-reg8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_3v3_s3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vddq_ddr_s0: dcdc-reg9 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vddq_ddr_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8_s3: dcdc-reg10 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_1v8_s3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
avcc_1v8_s0: pldo-reg1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "avcc_1v8_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8_s0: pldo-reg2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_1v8_s0";
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
avdd_1v2_s0: pldo-reg3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "avdd_1v2_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_3v3_s0: pldo-reg4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
regulator-name = "vcc_3v3_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd_s0: pldo-reg5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
regulator-name = "vccio_sd_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
pldo6_s3: pldo-reg6 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "pldo6_s3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd_0v75_s3: nldo-reg1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-name = "vdd_0v75_s3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <750000>;
};
};
vdd_ddr_pll_s0: nldo-reg2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-name = "vdd_ddr_pll_s0";
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <850000>;
};
};
avdd_0v75_s0: nldo-reg3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-name = "avdd_0v75_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_0v85_s0: nldo-reg4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-name = "vdd_0v85_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_0v75_s0: nldo-reg5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-name = "vdd_0v75_s0";
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
};
&tsadc {
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2m0_xfer>;
status = "okay";
};
&u2phy0 {
status = "okay";
};
&u2phy0_otg {
phy-supply = <&vbus_typec>;
status = "okay";
};
&u2phy1 {
status = "okay";
};
&u2phy1_otg {
phy-supply = <&vbus5v0_usb>;
status = "okay";
};
&u2phy2 {
status = "okay";
};
&u2phy2_host {
phy-supply = <&vcc4v0_5g>;
status = "okay";
};
&u2phy3 {
status = "okay";
};
&u2phy3_host {
phy-supply = <&vbus5v0_usb>;
status = "okay";
};
&usbdp_phy0 {
mode-switch;
orientation-switch;
sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&usbdp_phy1 {
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host0_xhci {
dr_mode = "host";
usb-role-switch;
status = "okay";
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};
&usb_host1_xhci {
dr_mode = "host";
status = "okay";
};
&usb_host2_xhci {
status = "okay";
};
&rknpu {
rknpu-supply = <&vdd_npu_s0>;
mem-supply = <&vdd_npu_mem_s0>;
status = "okay";
};
&rknpu_mmu {
status = "okay";
};

8
target/linux/rockchip/image/legacy.mk
View File

@ -279,3 +279,11 @@ $(call Device/Legacy/rk3588,$(1))
DEVICE_PACKAGES += kmod-r8169 kmod-nvme kmod-ata-ahci-dwc kmod-hwmon-pwmfan kmod-thermal kmod-rkwifi-bcmdhd-pcie rkwifi-firmware-ap6275p
endef
TARGET_DEVICES += xunlong_orangepi-5-plus
define Device/cyber_cyber3588-aib
$(call Device/Legacy/rk3588,$(1))
DEVICE_VENDOR := Cyber
DEVICE_MODEL := Cyber3588-AIB
DEVICE_PACKAGES += kmod-r8169 kmod-nvme kmod-ata-ahci-dwc kmod-hwmon-pwmfan kmod-thermal
endef
TARGET_DEVICES += cyber_cyber3588-aib