A new function "get_linux_version()" to normalize and print the
kernel version as an integer. In some migration scripts, it is
useful for checking the Linux kernel version.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19172
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit a0fe3cfb62)
Link: https://github.com/openwrt/openwrt/pull/20739
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This board is also as known as E-Life ETR631-T/ETR635-U.
Hardware specification:
SoC: MediaTek MT7981B 2x A53
Flash: 128 MB SPI-NAND
RAM: 256MB DDR3
Ethernet: 4x 10/100/1000 Mbps
Switch: MediaTek MT7531AE
WiFi: MediaTek MT7976C
Button: Reset, Mesh
Power: DC 12V 1A
Gain telnet access:
1. Login into web interface, and download the configuration.
2. Uncompress the configuration:
* Enter fakeroot if you are not login as root.
tar -zxf <filename>.tar.gz
3. Edit 'etc/passwd', remove root password: 'root::1:0:99999:7:::'.
4. Edit 'etc/rc.local', insert telnetd command before 'exit 0':
( sleep 3s; telnetd; ) &
5. Repack the configuration:
tar -zcf backup.tar.gz etc/
6. Upload new configuration via web interface, now you can connect to
KOMI A31 via telnet.
Flash instructions:
1. Connect to KOMI A31, backup everything, especially 'Factory' part.
2. Write new BL2:
mtd write openwrt-mediatek-filogic-konka_komi-a31-preloader.bin BL2
3. Write new FIP:
mtd write openwrt-mediatek-filogic-konka_komi-a31-bl31-uboot.fip FIP
4. Set static IP on your PC:
IP 192.168.1.254/24, GW 192.168.1.1
5. Serve OpenWrt initramfs image using TFTP server.
6. Cut off the power and re-engage, wait for TFTP recovery to complete.
7. After OpenWrt has booted, perform sysupgrade.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/20357
(cherry picked from commit 8a7de107d8)
[rebase uboot patches upon 24.10 branch]
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/20595
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add support for the Lunzn FastRhino R66S board.
Tested-by: Francisco G Luna <frangonlun@gmail.com>
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/19990
(cherry picked from commit 678536740e)
[rebase patches upon 24.10 branch]
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/20618
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Currently, building at91 subtargets via image builder will fail as the
required built at91bootstrap is not present in the image builder at all
since its presumed to be in the binary directory which obviously does not
exist yet.
So, lets install the at91bootstrap binary into image staging directory and
use that instead
Link: https://github.com/openwrt/openwrt/pull/18414
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit a947be41b7)
Currently, building at91 subtargets via image builder will fail as the
required built u-boot is not present in the image builder at all since its
presumed to be in the binary directory which obviously does not exist yet.
So, lets install the u-boot binary into image staging directory and use
that instead.
Link: https://github.com/openwrt/openwrt/pull/18414
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 4724331d70)
Currently, ls-rcw package is being included in the individual
profile DEVICE_PACKAGES but using the feature that allows skipping their
inclusion in the end image package list if prefixed with a tilde(~) which
was added in:
377b66990b ("build: introduce support to declare skip package")
But it not added to Image Builder so currently trying to build layerscape
device images in Image Builder will fail with:
ERROR: '~ls-rcw' is not a valid world dependency, format is name(@tag)([<>~=]version)
So, instead of having to rely on support for skipping package installation
and declaring the ls-rcw package in DEVICE_PACKAGES lets select it when
layerscape/armv7 target is selected.
Fixes: #18411
Link: https://github.com/openwrt/openwrt/pull/18462
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 598a0556b7)
Currently, ls-ddr-phy package is being included in the individual
profile DEVICE_PACKAGES but using the feature that allows skipping their
inclusion in the end image package list if prefixed with a tilde(~) which
was added in:
377b66990b ("build: introduce support to declare skip package")
But it not added to Image Builder so currently trying to build layerscape
device images in Image Builder will fail with:
ERROR: '~ls-ddr-phy' is not a valid world dependency, format is name(@tag)([<>~=]version)
So, instead of having to rely on support for skipping package installation
and declaring the ls-ddr-phy package in DEVICE_PACKAGES lets select it when
layerscape/armv8_64b target is selected.
Fixes: #18412
Link: https://github.com/openwrt/openwrt/pull/18462
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 8a28ddafe7)
Currently, ls-dpl package is being included in the individual
profile DEVICE_PACKAGES but using the feature that allows skipping their
inclusion in the end image package list if prefixed with a tilde(~) which
was added in:
377b66990b ("build: introduce support to declare skip package")
But it not added to Image Builder so currently trying to build layerscape
device images in Image Builder will fail with:
ERROR: '~ls-dpl' is not a valid world dependency, format is name(@tag)([<>~=]version)
So, instead of having to rely on support for skipping package installation
and declaring the ls-dpl package in DEVICE_PACKAGES lets select it when
layerscape/armv8_64b target is selected.
Fixes: #18412
Link: https://github.com/openwrt/openwrt/pull/18462
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 84437eeec0)
Currently, ls-mc package is being included in the individual
profile DEVICE_PACKAGES but using the feature that allows skipping their
inclusion in the end image package list if prefixed with a tilde(~) which
was added in:
377b66990b ("build: introduce support to declare skip package")
But it not added to Image Builder so currently trying to build layerscape
device images in Image Builder will fail with:
ERROR: '~ls-mc' is not a valid world dependency, format is name(@tag)([<>~=]version)
So, instead of having to rely on support for skipping package installation
and declaring the ls-mc package in DEVICE_PACKAGES lets select it when
layerscape/armv8_64b target is selected.
Fixes: #18412
Link: https://github.com/openwrt/openwrt/pull/18462
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 2fb3efda0a)
Currently, fman-ucode package is being included in the individual
profile DEVICE_PACKAGES but using the feature that allows skipping their
inclusion in the end image package list if prefixed with a tilde(~) which
was added in:
377b66990b ("build: introduce support to declare skip package")
But it not added to Image Builder so currently trying to build layerscape
device images in Image Builder will fail with:
ERROR: '~fman-ucode' is not a valid world dependency, format is name(@tag)([<>~=]version)
So, instead of having to rely on support for skipping package installation
and declaring the fman-ucode package in DEVICE_PACKAGES lets select it when
layerscape/armv8_64b target is selected.
Fixes: #18412
Link: https://github.com/openwrt/openwrt/pull/18462
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 22f02beaab)
Currently, tfa-layerscape packages are being included in the individual
profile DEVICE_PACKAGES but using the feature that allows skipping their
inclusion in the end image package list if prefixed with a tilde(~) which
was added in:
377b66990b ("build: introduce support to declare skip package")
But it not added to Image Builder so currently trying to build layerscape
device images in Image Builder will fail with:
ERROR: '~trusted-firmware-a-ls1012a-frdm' is not a valid world dependency, format is name(@tag)([<>~=]version)
So, instead of having to rely on support for skipping package installation
and declaring the individual TFA packages in DEVICE_PACKAGES we can just
do what other targets do and set BUILD_DEVICES so that TFA packages are
automatically set.
Fixes: #18412
Link: https://github.com/openwrt/openwrt/pull/18462
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 03ab770da5)
Currently, bcm63xx-cfe is being installed into kernel build dir, however
that does not work for Image Builder as only certain artifacts from kernel
build dir are included in Image Builder.
So, simply install bcm63xx-cfe into image staging dir so its artifacts can
be used in Image Builder as well.
Fixes: #18408Fixes: #18409
Link: https://github.com/openwrt/openwrt/pull/18463
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 4a7de50769)
No 'PKG_CPE_ID' is stored for the kernel package Makefile. This commit
adds this.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry picked from commit 112f594042)
A lot of recent commits in odhcpd main branch are structural/semantic
changes, so instead of adding those changes to 24.10 branch it's better
to focus on the fixes.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
b14cf98 router: log “Sending a RA on lan” at LOG_DEBUG
c2810fe odhcpd: update cmake file
8c2c065 odhcpd: convert README to markdown
3b96480 odhcpd: allow the use of an alternative cfg file
7328bfe odhcpd: remove confusing #defines
cdb9e5b odhcpd: improve RFC9096 § 3.5 SLAAC compliance
RFC9096 § 3.5 SLAAC compliance introduces a new config option (odhcpd
piofolder), which may wear out the flash under certain conditions (for
example: ISPs with dynamic IPv6 prefixes which disconnect the clients
every X hours).
Therefore, setting "dhcp.odhcpd.piofolder" to persistent storage in the
router flash is not advisable and should be set to other kinds of
persistent storage such as USBs, SDs, NVMEs...
In order to prevent wearing out the router flash it's set to ephemeral
storage by default (tmp):
uci set dhcp.odhcpd.piofolder="/tmp/odhcpd-piofolder"
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry picked from commit ea79b5875a)
2859741d971e dhcpv4: store reqopts as uint8_t
6d342cc03bf7 odhcpd: add DNR (RFC 9463) support
c89b8b3f2ff3 odhcpd: make the IPv6 RA DNR lifetime configurable
066b3dc6ec1a netlink: fix a memory leak
171140e90b6a odhcpd: add a helper function for addr6/prefix parsing
5585b969c18f router: move pref64 calculations to the config stage
4308384748be dhcpv6: add ipv6 pxe support
6e1ad492cef5 router: replace ssize_t with size_t
Signed-off-by: David Härdeman <david@hardeman.nu>
Link: https://github.com/openwrt/openwrt/pull/20022
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry picked from commit a6da0e0d37)
b462895d3157 lua: CMakeLists: drop redundant cmake_minimum_required
f247c18f8a55 examples: CMakeLists: drop redundant cmake_minimum_required
83a70399030d github: add CI build
d31effb4277b ubusd: Fix out of bounds access in event register message
d95837b1b143 ubusd: acl: compare uid/gid instead of user/group strings
b81257bb20dd ubusd: load extra group IDs for a client process
7d7b45fea05b add debian/ directory
aa4a7ee1d341 ubusd: fix more instances of missing length checks for patterns
60e04048a0e2 ubusd: fix ACL check for receiving events
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 4b907e69ea)
2b69c9859946 examples: CMakeLists: update cmake minimum required version to 3.10
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 88fe81bb0c)
Current PKG_MIRROR_HASH is wrong, but it went unnoticed, because the
tarball is being fetched from @OPENWRT project mirrors. Can be
reproduced with:
make package/ebtables/{download,check} FIXUP=1 DL_DIR=/tmp PKG_MIRROR_HASH=''
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Link: https://github.com/openwrt/openwrt/pull/20322
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 7d4edb21b6)
Use the copy_from_user() and copy_to_user() functions for accessing
memory provided by the user in the ptm netdev iotls.
In addition also check for root permission before executing ioctl.
Suggested-by: Stanislav Fort from Aisle Research
Reported-by: Stanislav Fort from Aisle Research
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 2a76abc544)
Adjust the 'inline' declaration order to fix the build warning:
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xway/ltq-adsl-mei-danube/ltq-adsl-mei/drv_mei_cpe.c:188:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration]
188 | static void inline MEI_MASK_AND_ACK_IRQ(int x)
| ^~~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
fix inline declaration warning
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 335a88df64)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
There are a lot of missing-prototypes warnings, It's not worth to
fix them one by one. Let us just ignore them.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit fb4aa6248f)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Fix incomplete type error by including the correct header.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 29987d44bb)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
These functions return the register memory addresses. Usually
they are fixed values, hence I think it's safe to remove the
qualifier "volatile".
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit bcf3f96c02)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Convert .remove to .remove_new so that it can be compatible with
both 6.6 and 6.12 kernels.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 7d6ee4e415)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Mark some functions as static.
* Include function prototypes header file.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 262917ef34)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Adjust the 'inline' declaration order to fix the build warning.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 86e5b77788)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Include missing header "drv_vmmc_api.h" to fix the compilation errors.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 1f909e9f6d)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
There are a lot of missing-prototypes warnings, It's not worth to
fix them one by one.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 144228d618)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
NULL and fixed addresses are constant, const qualifier are useless.
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_ar9.c:47:1: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers]
47 | const void (*ifx_bsp_basic_mps_decrypt)(unsigned int addr, int n) = NULL;
| ^~~~~
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_ar9.c:246:49: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers]
246 | ifx_bsp_basic_mps_decrypt = (const void (*)(unsigned int, int))0xbf0017c4;
| ^~~~~
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_ar9.c:249:49: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers]
249 | ifx_bsp_basic_mps_decrypt = (const void (*)(unsigned int, int))0xbf001ea4;
| ^~~~~
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_ar9.c:252:49: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers]
252 | ifx_bsp_basic_mps_decrypt = (const void (*)(unsigned int, int))0xbf001f38;
| ^~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit ac8e876a6e)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Fix incomplete type error by including the correct header.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 2e00140e63)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Mark cgu_get_pp32_clock() as static.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 621a1c9b56)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This patch fixes various missing-prototypes build warnings by:
* Mark some functions as static.
* Add missing prototypes.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit d81f8e159a)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Mark some functions as static to fix various missing-prototypes
build warnings on 6.12 kernel.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit ac18f03bd9)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This package is maintained by the OpenWrt local repository. There
is no need to modify it with the patch file. Just apply all patches
to the source files.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 491764f0f0)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Mark some functions as static.
* Include function prototypes header file.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit f6e7225039)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Mark some functions as static.
* Include function prototypes header file.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit b219c749b7)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
These functions return the register memory addresses. Usually
they are fixed values, hence I think it's safe to remove the
qualifier "volatile".
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit c3cb6a8725)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Convert .remove to .remove_new so that it can be compatible with
both 6.6 and 6.12 kernels.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 0d045a287a)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
PCI_IRQ_LEGACY was renamed to PCI_IRQ_INTX for kernel 6.10. Fix
compilation error:
/home/db/owrt/build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/linux-ipq40xx_generic/vrx518_ep-2.1.0/ep.c:469:69: error: 'PCI_IRQ_LEGACY' undeclared (first use in this function); did you mean 'NR_IRQS_LEGACY'?
469 | err = pci_alloc_irq_vectors(pdev, nvec, nvec, PCI_IRQ_MSI | PCI_IRQ_LEGACY);
| ^~~~~~~~~~~~~~
| NR_IRQS_LEGACY
Signed-off-by: Andre Heider <a.heider@gmail.com>
Co-authored-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit e80dfdb6c5)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Building against recent kernel versions (noticed with 6.12) and -Werror
can fail because a macro MAX(a,b) is already defined in minmax.h or
kernel.h before 5.10.
Initially noticed on 6.12, but it now happens after the kernel bump to
6.6.109 as well (upstream commit 6183c65)
In file included from ../mwlwifi-2025.02.06~db97edf2/hif/fwcmd.h:23,
from ../mwlwifi-2025.02.06~db97edf2/core.c:25:
../mwlwifi-2025.02.06~db97edf2/hif/hostcmd.h:1124: error: "MAX" redefined [-Werror]
1124 | #define MAX(a, b) (((a) > (b)) ? (a) : (b))
| ^~~
In file included from usr/include/mac80211-backport/linux/minmax.h:4,
from ./include/linux/kernel.h:27,
from usr/include/mac80211-backport/linux/kernel.h:3,
from ./include/linux/skbuff.h:13,
from usr/include/mac80211-backport/linux/skbuff.h:3,
from ./include/linux/if_ether.h:19,
from usr/include/mac80211-backport/linux/if_ether.h:3,
from ./include/linux/etherdevice.h:20,
from usr/include/mac80211-backport/linux/etherdevice.h:3,
from ../mwlwifi-2025.02.06~db97edf2/core.c:18:
./include/linux/minmax.h:315: note: this is the location of the previous definition
315 | #define MAX(a, b) __cmp(max, a, b)
| ^~~
Add a pending upstream patch which replaces the MAX(a,b) macro to avoid
conflicts and allow compilation with 6.12 backports
(cherry picked from commit 822bceb1d1)
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Link: https://github.com/openwrt/openwrt/pull/20420
Signed-off-by: Robert Marko <robimarko@gmail.com>
This includes the following commits from upstream Linux between 6.12.44
and 6.12.52:
```
$ git log --reverse --oneline v6.12.44...v6.12.52 -- drivers/net/wireless/ net/mac80211/ net/wireless/
5b7ae04969f8 wifi: cfg80211: fix use-after-free in cmp_bss()
3e789f8475f6 wifi: brcmfmac: fix use-after-free when rescheduling brcmf_btcoex_info work
d9f2fb6a2ac8 wifi: mt76: mt7925: fix locking in mt7925_change_vif_links()
1fb26fd3f601 wifi: mt76: prevent non-offchannel mgmt tx during scan/roc
2aef3667e6b0 wifi: mt76: free pending offchannel tx frames on wcid cleanup
e4d5a5fc61fd wifi: mt76: fix linked list corruption
c2e32ac3f107 wifi: iwlwifi: uefi: check DSM item validity
609a8ffff5a0 wifi: ath11k: fix group data packet drops during rekey
cedbbba8a8e8 wifi: cw1200: cap SSID length in cw1200_do_join()
92bedee7168d wifi: libertas: cap SSID len in lbs_associate()
31229145e6ba wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result()
06616410a3e5 wifi: mwifiex: Initialize the chan_stats array to zero
a001c2f6a40c wifi: mt76: mt7925u: use connac3 tx aggr check in tx complete
eefa2ad9009b wifi: mt76: mt7996: Initialize hdr before passing to skb_put_data()
089fd41902ee wifi: mt76: mt7925: fix the wrong bss cleanup for SAP
26618c039b78 wifi: ath11k: update channel list in reg notifier instead reg worker
fa4abd439f27 wifi: ath11k: update channel list in worker when wait flag is set
2203ef417044 wifi: wilc1000: avoid buffer overflow in WID string configuration
32adb020b0c3 wifi: mac80211: increase scan_ies_len for S1G
8df33f4d4a0b wifi: mac80211: fix incorrect type for ret
79dc6d4932de wifi: virt_wifi: Fix page fault on connect
1f52119809b7 wifi: ath11k: fix NULL dereference in ath11k_qmi_m3_load()
895cccf639ac wifi: rtw89: fix use-after-free in rtw89_core_tx_kick_off_and_wait()
914d02595ba6 wifi: rtlwifi: rtl8192cu: Don't claim USB ID 07b8:8188
1713796d6538 wifi: rtl8xxxu: Don't claim USB ID 07b8:8188
```
Removed ath11k/940-ath11k-Revert-clear-the-keys-properly-when-DISABLE_K.patch
This problem is fixed by:
609a8ffff5a0 wifi: ath11k: fix group data packet drops during rekey
Link: https://github.com/openwrt/openwrt/pull/20311
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
OpenSSL 3.0.18 is a security patch release. The most severe CVE fixed in this
release is Moderate.
This release incorporates the following bug fixes and mitigations:
* Fix Out-of-bounds read & write in RFC 3211 KEK Unwrap. (CVE-2025-9230)
* Fix Out-of-bounds read in HTTP client no_proxy handling. (CVE-2025-9232)
The removed patch is included upstream:
c0d968f0ac
Link: https://github.com/openwrt/openwrt/pull/20312
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is a smart door lock device equipped with OpenWrt 14.07 OEM
modified version Qdwrt
The OEM has closed down, This commit is intended to maximize the
remaining value of these devices. It can flash OpenWrt to become
an AP
Specification:
- SoC: MediaTek MT7628NN
- Flash: 8 MB
- RAM: 64 MB
- Power: DC 5V - 25V
- Ethernet: 1 x RJ45 (10/100 Mbps)
- Wireless radio: 802.11n 2.4g-only
- On-Board LED:
Status 1: GPIO/43 active-low
Status 2: GPIO/44 active-low
Power: AlwaysOn
- Button:
WPS / RESET: GPIO/14 active-low
- Bluetooth: CC2541 via UART1 (ttyS1) and GPIO/26-29
- RFID: MF RC522 on I2C@28
- RTC: DS1339 on I2C@68
- Shell (via CON1 cable)
- LED (Swipe card area):
- Green GPIO/3 active-high
- Red GPIO/11 active-high
- Matrix keypad: (active-low)
GPIO/20 GPIO/21 GPIO/19 (Rows)
GPIO/24 1 2 3
GPIO/25 4 5 6
GPIO/22 7 8 9
GPIO/23 BACK 0 ENTER
(Cols)
- UART: 1 x UART on PCB - 57600 8N1
- GPIO Relay: GPIO/42 active-high
- GPIO Buzzer: GPIO/15 active-high
Warning:
The original firmware does not use the device tree.
This device tree is written based on the content of /sys/devices/platform
and has been tested
Note:
- On the device, matrix keypad rows actually are columns, and the columns actually are rows
- The key code of the CLEAR key of the matrix keypad is BACK in the original firmware.
Issue:
- No drivers in mainline kernel for RFID and Bluetooth.
Flash Instruction:
Using SSH/Telnet:
1. Connect the board to the computer via RJ45 Ethernet
2. Login 10.10.10.1 with root password "szqdingnet123" (SSH Port 22, Telnet Port 9900)
3. Download openwrt firmware on the computer.
4. Setup a http server on computer. And use wget download openwrt firmware from computer
5. Use command "mtd -r write openwrt-ramips-mt76x8-qding_qc202-squashfs-sysupgrade.bin firmware"
to flash
Using U-Boot WebUI:
1. Configure PC with a static IP address 10.10.10.2/24.
2. Open http://10.10.10.1
3. Use "mkqdimg -B qc202 -f openwrt-ramips-mt76x8-qding_qc202-squashfs-sysupgrade.bin" to
make image.
4. Upload factory.bin via U-Boot WebUI.
Original Firmware Dump / More details:
https://blog.gov.cooking/archives/research-qianding-smart-locker-and-flash.html
Original U-Boot firmware image tools:
https://gitlab.com/CoiaPrant/mkqdimg
Signed-off-by: Coia Prant <coiaprant@gmail.com>
Tested-by: Coia Prant <coiaprant@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17471
(cherry picked from commit b2f814fed4)
Link: https://github.com/openwrt/openwrt/pull/20159
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Backport support for 1024 MPDU TX aggregation in EHT from upstream
kernel. Without this fix, TX performance on WiFi-7 links
is severely limited, making the link practically unusable.
Signed-off-by: Oliver Sedlbauer <osedlbauer@tdt.de>
Make sure that the package gets updated after the last fix.
Fixes: 9d83c1b1a9 ("uqmi: fix data-format parsing")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 0203ef3fc9)
wda-get-data-format now returns an object instead of a single string.
Account for this change when reading the packet data format.
Suggested-by: Sebastian Ertz (https://github.com/sebastianertz)
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit cd20ae44f2)
