Go to file
2022-07-26 17:42:26 +08:00
.github
config update default dist name 2022-07-20 13:54:23 +08:00
include add default packages 2022-07-20 13:54:53 +08:00
LICENSES LICENSES: include all used licenses in LICENSES directory 2021-02-14 19:21:38 +01:00
package kmod: cdc-ncm depends on cdc-ether 2022-07-26 13:18:04 +08:00
scripts x86 patches 2022-07-19 13:58:38 +08:00
target target/rtd129x: disable usb2.0 port on ars2 2022-07-26 17:42:26 +08:00
toolchain remove patch for clang 2022-07-19 13:57:08 +08:00
tools target/rtd129x: linux 4.9 2022-07-19 13:57:04 +08:00
.gitattributes
.gitignore gitignore: add .vscode for VS Code users 2021-03-29 22:26:27 +02:00
BSDmakefile
Config.in
COPYING COPYING: add COPYING file to specify project licenses 2021-02-14 19:21:38 +01:00
feeds.conf.default add default packages 2022-07-20 13:54:53 +08:00
Index.mk rtd129x: update 2022-07-19 13:58:38 +08:00
Makefile Revert "build: replace which with Bash command built-in" 2021-03-03 23:02:30 +01:00
README.md update readme 2022-07-19 17:17:17 +08:00
rules.mk target/rtd129x: linux 4.9 2022-07-19 13:57:04 +08:00

iStoreOS 是提供给入门级 OpenWRT 爱好者使用的固件, 基于原版 OpenWRT ,在 ARS2 上经过长期迭代,最终开放适配到多个硬件平台

更多信息请参阅 https://github.com/istoreos

以下是 OpenWRT 原始的 README

OpenWrt logo

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

Sunshine!

Development

To build your own firmware you need a GNU/Linux, BSD or MacOSX system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

gcc binutils bzip2 flex python3 perl make find grep diff unzip gawk getopt
subversion libz-dev libc-dev rsync which

Quickstart

  1. Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default

  2. Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/

  3. Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.

  4. Run make to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.

The main repository uses multiple sub-repositories to manage packages of different categories. All packages are installed via the OpenWrt package manager called opkg. If you're looking to develop the web interface or port packages to OpenWrt, please find the fitting repository below.

Support Information

For a list of supported devices see the OpenWrt Hardware Database

Documentation

Support Community

  • Forum: For usage, projects, discussions and hardware advise.
  • Support Chat: Channel #openwrt on oftc.net.

Developer Community

License

OpenWrt is licensed under GPL-2.0