profiles: prpl_core.yml: feed_prplos: Integrating Amx Process Monitor Enhancement features with prplos (FEAT-70, FEAT-77 & FEAT-88)
ci:cram Add/Update cram testcase for amx-processmonitoring
Integrate below enhancements to Amx Process Monitor
- Redesigned Process Monitor to allow it to respect its configuration, regardless of the configured time intervals and number of processes, allowing to execute multiple tests in parallel.
- Add appropriate configuration for critical prplWare service which would required GW REBOOT to recover multiple failures. Service restart would be taken care by procd under FEAT-067.
- Added capability to detect service exits using procd events
- Collected and reported procd event statistics
- Additionally collected and reported procd respawn configuration for configured services
- Added a per-test parameter that records largest observed value of ProcessMonitor.Test.{i}.NumFailed when the “Test Failed” condition in the flow diagram of process monitor is false
- Added a per-test maximum response time measured for a successful test.
- Allowed to reset these values through the reset() Command.
References: PCF-2011, PPM-3493, PCF-2033
Signed-off-by: Sathishkumar Selvam <sathishkumar.selvam@capgemini.com>
Closes PCF-2011, PPM-3493, PCF-2033
This commit is contained in:
Sathishkumar Selvam
Hela Saadani
parent
bf752ab98e
commit
7cfb0ae5fd
@ -0,0 +1,158 @@
|
||||
Create R alias:
|
||||
|
||||
$ alias R="${CRAM_REMOTE_COMMAND:-}"
|
||||
|
||||
$ alias C="${CRAM_REMOTE_COPY:-}"
|
||||
|
||||
Set script parameters and copy the script to device:
|
||||
|
||||
$ S=". /tmp/script_functions_amx.sh"
|
||||
|
||||
$ C ${TESTDIR}/script_functions_amx.sh root@${TARGET_LAN_IP}:/tmp/script_functions_amx.sh
|
||||
Warning: Permanently added '*' (*) to the list of known hosts* (glob)
|
||||
|
||||
Pre-test actions, Restart process service to clear the respawns and other failures before starting with tests:
|
||||
|
||||
$ R "service tr181-mcastd restart > /dev/null 2>&1"
|
||||
$ R "service tr181-pcp restart > /dev/null 2>&1"
|
||||
$ R "service tr181-qos restart > /dev/null 2>&1"
|
||||
$ R "service dhcpv4-manager restart > /dev/null 2>&1"
|
||||
|
||||
Wait 5 seconds for the process to turn functional:
|
||||
|
||||
$ sleep 5
|
||||
|
||||
Initialize the ProcessMonitor.Test.i Id for required processes:
|
||||
|
||||
$ Tr181McastdId=$(R "ba-cli ProcessMonitor.Test.*.Name? | grep tr181-mcastd | sed -n 's/.*Test\.\([0-9]\+\)\..*/\1/p'")
|
||||
$ Tr181PcpId=$(R "ba-cli ProcessMonitor.Test.*.Name? | grep tr181-pcp | sed -n 's/.*Test\.\([0-9]\+\)\..*/\1/p'")
|
||||
$ WanManagerId=$(R "ba-cli ProcessMonitor.Test.*.Name? | grep tr181-qos | sed -n 's/.*Test\.\([0-9]\+\)\..*/\1/p'")
|
||||
$ Dhcpv4ManagerId=$(R "ba-cli ProcessMonitor.Test.*.Name? | grep dhcpv4-manager | sed -n 's/.*Test\.\([0-9]\+\)\..*/\1/p'")
|
||||
|
||||
Get the initial NumProcessRespawn for all the process:
|
||||
|
||||
$ Tr181McastdMaxRespawn=$(R "ba-cli -l ProcessMonitor.Test.$Tr181McastdId.NumProcessRespawn? | sed '/^$/d'")
|
||||
$ Tr181PcpRespawn=$(R "ba-cli -l ProcessMonitor.Test.$Tr181PcpId.NumProcessRespawn? | sed '/^$/d'")
|
||||
$ WanManagerRespawn=$(R "ba-cli -l ProcessMonitor.Test.$WanManagerId.NumProcessRespawn? | sed '/^$/d'")
|
||||
$ Dhcpv4ManagerRespawn=$(R "ba-cli -l ProcessMonitor.Test.$Dhcpv4ManagerId.NumProcessRespawn? | sed '/^$/d'")
|
||||
|
||||
Get the initial MaxFailNum for all the process:
|
||||
|
||||
$ Tr181McastdMaxFail=$(R "ba-cli -l ProcessMonitor.Test.$Tr181McastdId.MaxFailNum? | sed '/^$/d'")
|
||||
$ Tr181PcpMaxFail=$(R "ba-cli -l ProcessMonitor.Test.$Tr181PcpId.MaxFailNum? | sed '/^$/d'")
|
||||
$ WanManagerMaxFail=$(R "ba-cli -l ProcessMonitor.Test.$WanManagerId.MaxFailNum? | sed '/^$/d'")
|
||||
$ Dhcpv4ManagerMaxFail=$(R "ba-cli -l ProcessMonitor.Test.$Dhcpv4ManagerId.MaxFailNum? | sed '/^$/d'")
|
||||
|
||||
Get the Process ID and verify all expected process are running:
|
||||
|
||||
$ for process_name in "tr181-mcastd" "tr181-pcp" "tr181-qos" \
|
||||
> "dhcpv4-manager"; do R "${S} && get_pid \"$process_name\""; done
|
||||
tr181-mcastd.* \d+ (re)
|
||||
tr181-pcp.* \d+ (re)
|
||||
tr181-qos.* \d+ (re)
|
||||
dhcpv4-manager.* \d+ (re)
|
||||
|
||||
Change MaxFail parameter for the processes to higher value:
|
||||
|
||||
$ R "ba-cli -l ProcessMonitor.Test.$Tr181McastdId.MaxFailNum=30 | sed '/^$/d'"
|
||||
30
|
||||
|
||||
$ R "ba-cli -l ProcessMonitor.Test.$Tr181PcpId.MaxFailNum=30 | sed '/^$/d'"
|
||||
30
|
||||
|
||||
$ R "ba-cli -l ProcessMonitor.Test.$WanManagerId.MaxFailNum=30 | sed '/^$/d'"
|
||||
30
|
||||
|
||||
$ R "ba-cli -l ProcessMonitor.Test.$Dhcpv4ManagerId.MaxFailNum=30 | sed '/^$/d'"
|
||||
30
|
||||
|
||||
Kill the processes and wait - Frist kill attempt:
|
||||
|
||||
$ for process_name in "tr181-mcastd" "tr181-pcp" "tr181-qos" \
|
||||
> "dhcpv4-manager"; do R "${S} && kill_process \"$process_name\""; done
|
||||
|
||||
$ sleep 14
|
||||
|
||||
Get the Process ID and verify all expected process are running:
|
||||
|
||||
$ for process_name in "tr181-mcastd" "tr181-pcp" "tr181-qos" \
|
||||
> "dhcpv4-manager"; do R "${S} && get_pid \"$process_name\""; done
|
||||
tr181-mcastd.* \d+ (re)
|
||||
tr181-pcp.* \d+ (re)
|
||||
tr181-qos.* \d+ (re)
|
||||
dhcpv4-manager.* \d+ (re)
|
||||
|
||||
Verify amx-processmonitoring has updated the NumProcessRespawn after process respawn:
|
||||
|
||||
$ R "${S} && verify_respawn_value $Tr181McastdId $((Tr181McastdMaxRespawn+1))"
|
||||
tr181-mcastd NumProcessRespawn PASS
|
||||
|
||||
$ R "${S} && verify_respawn_value $Tr181PcpId $((Tr181PcpRespawn+1))"
|
||||
tr181-pcp NumProcessRespawn PASS
|
||||
|
||||
$ R "${S} && verify_respawn_value $WanManagerId $((WanManagerRespawn+1))"
|
||||
tr181-qos NumProcessRespawn PASS
|
||||
|
||||
$ R "${S} && verify_respawn_value $Dhcpv4ManagerId $((Dhcpv4ManagerRespawn+1))"
|
||||
dhcpv4-manager NumProcessRespawn PASS
|
||||
|
||||
Stop start all the process:
|
||||
|
||||
$ R "service tr181-mcastd stop > /dev/null 2>&1"
|
||||
|
||||
$ R "service tr181-mcastd start > /dev/null 2>&1"
|
||||
|
||||
$ R "service tr181-pcp stop > /dev/null 2>&1"
|
||||
|
||||
$ R "service tr181-pcp start > /dev/null 2>&1"
|
||||
|
||||
$ R "service tr181-qos stop > /dev/null 2>&1"
|
||||
|
||||
$ R "service tr181-qos start > /dev/null 2>&1"
|
||||
|
||||
$ R "service dhcpv4-manager stop > /dev/null 2>&1"
|
||||
|
||||
$ R "service dhcpv4-manager start > /dev/null 2>&1"
|
||||
|
||||
Wait for the processes to come up:
|
||||
|
||||
$ sleep 5
|
||||
|
||||
Get the Process ID and verify all expected process are running:
|
||||
|
||||
$ for process_name in "tr181-mcastd" "tr181-pcp" "tr181-qos" \
|
||||
> "dhcpv4-manager"; do R "${S} && get_pid \"$process_name\""; done
|
||||
tr181-mcastd.* \d+ (re)
|
||||
tr181-pcp.* \d+ (re)
|
||||
tr181-qos.* \d+ (re)
|
||||
dhcpv4-manager.* \d+ (re)
|
||||
|
||||
Verify amx-process monitor has reset NumProcessRespawn to 0:
|
||||
|
||||
$ R "${S} && verify_respawn_value $Tr181McastdId 0"
|
||||
tr181-mcastd NumProcessRespawn PASS
|
||||
|
||||
$ R "${S} && verify_respawn_value $Tr181PcpId 0"
|
||||
tr181-pcp NumProcessRespawn PASS
|
||||
|
||||
$ R "${S} && verify_respawn_value $WanManagerId 0"
|
||||
tr181-qos NumProcessRespawn PASS
|
||||
|
||||
$ R "${S} && verify_respawn_value $Dhcpv4ManagerId 0"
|
||||
dhcpv4-manager NumProcessRespawn PASS
|
||||
|
||||
Clean-up, Revert MaxFail parameter for the process to initial value:
|
||||
|
||||
$ R "ba-cli -l ProcessMonitor.Test.$Tr181McastdId.MaxFailNum=$Tr181McastdMaxFail | sed '/^$/d'"
|
||||
\d+ (re)
|
||||
|
||||
$ R "ba-cli -l ProcessMonitor.Test.$Tr181PcpId.MaxFailNum=$Tr181PcpMaxFail | sed '/^$/d'"
|
||||
\d+ (re)
|
||||
|
||||
$ R "ba-cli -l ProcessMonitor.Test.$WanManagerId.MaxFailNum=$WanManagerMaxFail | sed '/^$/d'"
|
||||
\d+ (re)
|
||||
|
||||
$ R "ba-cli -l ProcessMonitor.Test.$Dhcpv4ManagerId.MaxFailNum=$Dhcpv4ManagerMaxFail | sed '/^$/d'"
|
||||
\d+ (re)
|
||||
|
||||
$ R logger -t cram "Amx-processmonitoring respawn attribute reset test finished"
|
||||
@ -0,0 +1,133 @@
|
||||
Create aliases:
|
||||
|
||||
$ alias R="${CRAM_REMOTE_COMMAND:-}"
|
||||
|
||||
$ alias C="${CRAM_REMOTE_COPY:-}"
|
||||
|
||||
Set script parameters and copy the script to device:
|
||||
|
||||
$ S=". /tmp/script_functions_amx.sh"
|
||||
|
||||
$ C ${TESTDIR}/script_functions_amx.sh root@${TARGET_LAN_IP}:/tmp/script_functions_amx.sh
|
||||
Warning: Permanently added '*' (*) to the list of known hosts* (glob)
|
||||
|
||||
$ R logger -t cram "Starting with amx-processmonitoring reset cram test"
|
||||
|
||||
Pre-test actions, Restart the process service to clear the respawns and other failures before starting with tests:
|
||||
|
||||
$ R "service tr181-mcastd restart > /dev/null 2>&1"
|
||||
$ R "service tr181-pcp restart > /dev/null 2>&1"
|
||||
$ R "service tr181-qos restart > /dev/null 2>&1"
|
||||
$ R "service dhcpv4-manager restart > /dev/null 2>&1"
|
||||
|
||||
Wait 5 seconds for the process to turn functional:
|
||||
|
||||
$ sleep 5
|
||||
|
||||
Initialize the ProcessMonitor.Test.i Id for required processes:
|
||||
|
||||
$ Tr181McastId=$(R "ba-cli ProcessMonitor.Test.*.Name? | grep tr181-mcastd | sed -n 's/.*Test\.\([0-9]\+\)\..*/\1/p'")
|
||||
$ Tr181PcpId=$(R "ba-cli ProcessMonitor.Test.*.Name? | grep tr181-pcp | sed -n 's/.*Test\.\([0-9]\+\)\..*/\1/p'")
|
||||
$ WanManagerId=$(R "ba-cli ProcessMonitor.Test.*.Name? | grep tr181-qos | sed -n 's/.*Test\.\([0-9]\+\)\..*/\1/p'")
|
||||
$ Dhcpv4ManagerId=$(R "ba-cli ProcessMonitor.Test.*.Name? | grep dhcpv4-manager | sed -n 's/.*Test\.\([0-9]\+\)\..*/\1/p'")
|
||||
|
||||
Get the initial NumProcessRespawn for all the process:
|
||||
|
||||
$ Tr181McastRespawn=$(R "ba-cli -l ProcessMonitor.Test.$Tr181McastId.NumProcessRespawn? | sed '/^$/d'")
|
||||
$ Tr181PcpRespawn=$(R "ba-cli -l ProcessMonitor.Test.$Tr181PcpId.NumProcessRespawn? | sed '/^$/d'")
|
||||
$ WanManagerRespawn=$(R "ba-cli -l ProcessMonitor.Test.$WanManagerId.NumProcessRespawn? | sed '/^$/d'")
|
||||
$ Dhcpv4ManagerRespawn=$(R "ba-cli -l ProcessMonitor.Test.$Dhcpv4ManagerId.NumProcessRespawn? | sed '/^$/d'")
|
||||
|
||||
Get the initial MaxFailNum for all the process:
|
||||
|
||||
$ Tr181McastMaxFail=$(R "ba-cli -l ProcessMonitor.Test.$Tr181McastId.MaxFailNum? | sed '/^$/d'")
|
||||
$ Tr181PcpMaxFail=$(R "ba-cli -l ProcessMonitor.Test.$Tr181PcpId.MaxFailNum? | sed '/^$/d'")
|
||||
$ WanManagerMaxFail=$(R "ba-cli -l ProcessMonitor.Test.$WanManagerId.MaxFailNum? | sed '/^$/d'")
|
||||
$ Dhcpv4ManagerMaxFail=$(R "ba-cli -l ProcessMonitor.Test.$Dhcpv4ManagerId.MaxFailNum? | sed '/^$/d'")
|
||||
|
||||
Get the Process ID and verify all expected process are running:
|
||||
|
||||
$ for process_name in "tr181-mcastd" "tr181-pcp" "tr181-qos" "dhcpv4-manager"; do
|
||||
> R "${S} && get_pid \"$process_name\""; done
|
||||
tr181-mcastd.* \d+ (re)
|
||||
tr181-pcp.* \d+ (re)
|
||||
tr181-qos.* \d+ (re)
|
||||
dhcpv4-manager.* \d+ (re)
|
||||
|
||||
Kill the processes - Frist kill attempt:
|
||||
|
||||
$ for process_name in "tr181-mcastd" "tr181-pcp" "tr181-qos" "dhcpv4-manager"; do
|
||||
> R "${S} && kill_process \"$process_name\""; done
|
||||
|
||||
$ sleep 15
|
||||
|
||||
Get the Process ID and verify all expected process are running:
|
||||
|
||||
$ for process_name in "tr181-mcastd" "tr181-pcp" "tr181-qos" "dhcpv4-manager"; do
|
||||
> R "${S} && get_pid \"$process_name\""; done
|
||||
tr181-mcastd.* \d+ (re)
|
||||
tr181-pcp.* \d+ (re)
|
||||
tr181-qos.* \d+ (re)
|
||||
dhcpv4-manager.* \d+ (re)
|
||||
|
||||
Verify amx-process monitor has updated the NumProcessRespawn after process respawn:
|
||||
|
||||
$ R "${S} && verify_process_fail_update $Tr181McastId $((Tr181McastRespawn+1))"
|
||||
tr181-mcastd NumProcessRespawn PASS
|
||||
tr181-mcastd MaxNumFailed PASS
|
||||
|
||||
$ R "${S} && verify_process_fail_update $Tr181PcpId $((Tr181PcpRespawn+1))"
|
||||
tr181-pcp NumProcessRespawn PASS
|
||||
tr181-pcp MaxNumFailed PASS
|
||||
|
||||
$ R "${S} && verify_process_fail_update $WanManagerId $((WanManagerRespawn+1))"
|
||||
tr181-qos NumProcessRespawn PASS
|
||||
tr181-qos MaxNumFailed PASS
|
||||
|
||||
$ R "${S} && verify_process_fail_update $Dhcpv4ManagerId $((Dhcpv4ManagerRespawn+1))"
|
||||
dhcpv4-manager NumProcessRespawn PASS
|
||||
dhcpv4-manager MaxNumFailed PASS
|
||||
|
||||
Change test subject of amx-processmonitor and verify process monitoring parameters are reset:
|
||||
|
||||
$ for process_id in $Tr181McastId $Tr181PcpId $WanManagerId $Dhcpv4ManagerId; do
|
||||
> R "${S} && change_process_subject" $process_id; done
|
||||
tr181-mcastd subject change OK
|
||||
tr181-pcp subject change OK
|
||||
tr181-qos subject change OK
|
||||
dhcpv4-manager subject change OK
|
||||
|
||||
Verify ProcessMonitoring parameter reset after calling reset method:
|
||||
|
||||
$ R "${S} && verify_value_reset $Tr181McastId"
|
||||
tr181-mcastd ProcessMonitoringEnabled PASS
|
||||
tr181-mcastd MaxNumFailed PASS
|
||||
tr181-mcastd NumProcessFail PASS
|
||||
tr181-mcastd NumProcessRespawn PASS
|
||||
|
||||
$ R "${S} && verify_value_reset $Tr181PcpId"
|
||||
tr181-pcp ProcessMonitoringEnabled PASS
|
||||
tr181-pcp MaxNumFailed PASS
|
||||
tr181-pcp NumProcessFail PASS
|
||||
tr181-pcp NumProcessRespawn PASS
|
||||
|
||||
$ R "${S} && verify_value_reset $WanManagerId"
|
||||
tr181-qos ProcessMonitoringEnabled PASS
|
||||
tr181-qos MaxNumFailed PASS
|
||||
tr181-qos NumProcessFail PASS
|
||||
tr181-qos NumProcessRespawn PASS
|
||||
|
||||
$ R "${S} && verify_value_reset $Dhcpv4ManagerId"
|
||||
dhcpv4-manager ProcessMonitoringEnabled PASS
|
||||
dhcpv4-manager MaxNumFailed PASS
|
||||
dhcpv4-manager NumProcessFail PASS
|
||||
dhcpv4-manager NumProcessRespawn PASS
|
||||
|
||||
Restart the process service to clear the respawns from above tests:
|
||||
|
||||
$ R "service tr181-mcastd restart > /dev/null 2>&1"
|
||||
$ R "service tr181-pcp restart > /dev/null 2>&1"
|
||||
$ R "service tr181-qos restart > /dev/null 2>&1"
|
||||
$ R "service dhcpv4-manager restart > /dev/null 2>&1"
|
||||
|
||||
$ R logger -t cram "Amx-processmonitoring reset cram test finished"
|
||||
@ -0,0 +1,115 @@
|
||||
Create aliases:
|
||||
|
||||
$ alias R="${CRAM_REMOTE_COMMAND:-}"
|
||||
|
||||
$ alias C="${CRAM_REMOTE_COPY:-}"
|
||||
|
||||
Set script parameters and copy the script to device:
|
||||
|
||||
$ S=". /tmp/script_functions_amx.sh"
|
||||
|
||||
$ C ${TESTDIR}/script_functions_amx.sh root@${TARGET_LAN_IP}:/tmp/amx_script_functions.sh
|
||||
Warning: Permanently added '*' (*) to the list of known hosts* (glob)
|
||||
|
||||
$ R logger -t cram "Starting with amx-processmonitoring reset cram test"
|
||||
|
||||
Pre-test actions, Restart the process service to clear the respawns and other failures before starting with tests:
|
||||
|
||||
$ R "service tr181-mcastd restart > /dev/null 2>&1"
|
||||
$ R "service tr181-pcp restart > /dev/null 2>&1"
|
||||
$ R "service dhcpv4-manager restart > /dev/null 2>&1"
|
||||
|
||||
Wait 5 seconds for the process to turn functional:
|
||||
|
||||
$ sleep 5
|
||||
|
||||
Initialize the ProcessMonitor.Test.i Id for required processes:
|
||||
|
||||
$ Tr181McastId=$(R "ba-cli ProcessMonitor.Test.*.Name? | grep tr181-mcastd | sed -n 's/.*Test\.\([0-9]\+\)\..*/\1/p'")
|
||||
$ Tr181PcpId=$(R "ba-cli ProcessMonitor.Test.*.Name? | grep tr181-pcp | sed -n 's/.*Test\.\([0-9]\+\)\..*/\1/p'")
|
||||
$ Dhcpv4ManagerId=$(R "ba-cli ProcessMonitor.Test.*.Name? | grep dhcpv4-manager | sed -n 's/.*Test\.\([0-9]\+\)\..*/\1/p'")
|
||||
|
||||
Get the initial NumProcessRespawn for all the process:
|
||||
|
||||
$ Tr181McastRespawn=$(R "ba-cli -l ProcessMonitor.Test.$Tr181McastId.NumProcessRespawn? | sed '/^$/d'")
|
||||
$ Tr181PcpRespawn=$(R "ba-cli -l ProcessMonitor.Test.$Tr181PcpId.NumProcessRespawn? | sed '/^$/d'")
|
||||
$ Dhcpv4ManagerRespawn=$(R "ba-cli -l ProcessMonitor.Test.$Dhcpv4ManagerId.NumProcessRespawn? | sed '/^$/d'")
|
||||
|
||||
Get the initial MaxFailNum for all the process:
|
||||
|
||||
$ Tr181McastMaxFail=$(R "ba-cli -l ProcessMonitor.Test.$Tr181McastId.MaxFailNum? | sed '/^$/d'")
|
||||
$ Tr181PcpMaxFail=$(R "ba-cli -l ProcessMonitor.Test.$Tr181PcpId.MaxFailNum? | sed '/^$/d'")
|
||||
$ Dhcpv4ManagerMaxFail=$(R "ba-cli -l ProcessMonitor.Test.$Dhcpv4ManagerId.MaxFailNum? | sed '/^$/d'")
|
||||
|
||||
Get the Process ID and verify all expected process are running:
|
||||
|
||||
$ for process_name in "tr181-mcastd" "tr181-pcp" "dhcpv4-manager"; do
|
||||
> R "${S} && get_pid \"$process_name\""; done
|
||||
tr181-mcastd.* \d+ (re)
|
||||
tr181-pcp.* \d+ (re)
|
||||
dhcpv4-manager.* \d+ (re)
|
||||
|
||||
Kill the processes - Frist kill attempt:
|
||||
|
||||
$ for process_name in "tr181-mcastd" "tr181-pcp" "dhcpv4-manager"; do
|
||||
> R "${S} && kill_process \"$process_name\""; done
|
||||
|
||||
$ sleep 15
|
||||
|
||||
Get the Process ID and verify all expected process are running:
|
||||
|
||||
$ for process_name in "tr181-mcastd" "tr181-pcp" "dhcpv4-manager"; do
|
||||
> R "${S} && get_pid \"$process_name\""; done
|
||||
tr181-mcastd.* \d+ (re)
|
||||
tr181-pcp.* \d+ (re)
|
||||
dhcpv4-manager.* \d+ (re)
|
||||
|
||||
Verify amx-process monitor has updated the NumProcessRespawn after process respawn:
|
||||
|
||||
$ R "${S} && verify_process_fail_update $Tr181McastId $((Tr181McastRespawn+1))"
|
||||
tr181-mcastd NumProcessRespawn PASS
|
||||
tr181-mcastd MaxNumFailed PASS
|
||||
|
||||
$ R "${S} && verify_process_fail_update $Tr181PcpId $((Tr181PcpRespawn+1))"
|
||||
tr181-pcp NumProcessRespawn PASS
|
||||
tr181-pcp MaxNumFailed PASS
|
||||
|
||||
$ R "${S} && verify_process_fail_update $Dhcpv4ManagerId $((Dhcpv4ManagerRespawn+1))"
|
||||
dhcpv4-manager NumProcessRespawn PASS
|
||||
dhcpv4-manager MaxNumFailed PASS
|
||||
|
||||
Call reset method of amx-processmonitor and verify process monitoring parameters are reset:
|
||||
|
||||
$ for process_id in $Tr181McastId $Tr181PcpId $Dhcpv4ManagerId; do
|
||||
> R "${S} && reset_amx_process_monitoring $process_id"; done
|
||||
tr181-mcastd reset OK
|
||||
tr181-pcp reset OK
|
||||
dhcpv4-manager reset OK
|
||||
|
||||
Verify ProcessMonitoring parameter reset after calling reset method:
|
||||
|
||||
$ R "${S} && verify_value_reset $Tr181McastId"
|
||||
tr181-mcastd ProcessMonitoringEnabled PASS
|
||||
tr181-mcastd MaxNumFailed PASS
|
||||
tr181-mcastd NumProcessFail PASS
|
||||
tr181-mcastd NumProcessRespawn PASS
|
||||
|
||||
$ R "${S} && verify_value_reset $Tr181PcpId"
|
||||
tr181-pcp ProcessMonitoringEnabled PASS
|
||||
tr181-pcp MaxNumFailed PASS
|
||||
tr181-pcp NumProcessFail PASS
|
||||
tr181-pcp NumProcessRespawn PASS
|
||||
|
||||
$ R "${S} && verify_value_reset $Dhcpv4ManagerId"
|
||||
dhcpv4-manager ProcessMonitoringEnabled PASS
|
||||
dhcpv4-manager MaxNumFailed PASS
|
||||
dhcpv4-manager NumProcessFail PASS
|
||||
dhcpv4-manager NumProcessRespawn PASS
|
||||
|
||||
Restart the process service to clear the respawns from above tests:
|
||||
|
||||
$ R "service tr181-mcastd restart > /dev/null 2>&1"
|
||||
$ R "service tr181-pcp restart > /dev/null 2>&1"
|
||||
$ R "service dhcpv4-manager restart > /dev/null 2>&1"
|
||||
|
||||
$ R logger -t cram "Amx-processmonitoring reset cram test finished"
|
||||
@ -0,0 +1,43 @@
|
||||
Create R alias:
|
||||
|
||||
$ alias R="${CRAM_REMOTE_COMMAND:-}"
|
||||
|
||||
$ R logger -t "Starting with amx-processmonitoring enable test"
|
||||
|
||||
This Helper method finds the Instance Id and return the ProcessMonitoringEnabled parameter, #Param1 - name of the process:
|
||||
|
||||
$ get_amx_process_monitoring() { InstanceId=$(R "ba-cli " \
|
||||
> "ProcessMonitor.Test.*.Name? | grep $1 | sed -n 's/.*Test\.\([0-9]\+\)\..*/\1/p'"); \
|
||||
> amx_enable=$(R "ba-cli -l ProcessMonitor.Test.$InstanceId.ProcessMonitoringEnabled? | sed '/^$/d'"); \
|
||||
> echo "$1=$amx_enable";}
|
||||
|
||||
Verify all expected processes are enabled for monitoring by amx-processmonitor, value of 1 specifies enabled for monitoring:
|
||||
|
||||
$ for process in tr181-device tr181-pcp tr181-firewall tr181-qos tr181-mcastd; do get_amx_process_monitoring $process; done
|
||||
tr181-device=1
|
||||
tr181-pcp=1
|
||||
tr181-firewall=1
|
||||
tr181-qos=1
|
||||
tr181-mcastd=1
|
||||
|
||||
$ for process in tr181-mqttbroker tr181-bridging tr181-ppp tr181-dns tr181-xpon; do get_amx_process_monitoring $process; done
|
||||
tr181-mqttbroker=1
|
||||
tr181-bridging=1
|
||||
tr181-ppp=1
|
||||
tr181-dns=1
|
||||
tr181-xpon=1
|
||||
|
||||
$ for process in deviceinfo-manager tr181-dns gmap-server cwmp_plugin reboot-service; do get_amx_process_monitoring $process; done
|
||||
deviceinfo-manager=1
|
||||
tr181-dns=1
|
||||
gmap-server=1
|
||||
cwmp_plugin=1
|
||||
reboot-service=1
|
||||
|
||||
$ for process in odhcpd hosts-manager cellular-manager dhcpv4-manager; do get_amx_process_monitoring $process; done
|
||||
odhcpd=1
|
||||
hosts-manager=1
|
||||
cellular-manager=1
|
||||
dhcpv4-manager=1
|
||||
|
||||
$ R logger -t "Amx-processmonitoring enable test finished"
|
||||
@ -0,0 +1,182 @@
|
||||
Create R alias:
|
||||
|
||||
$ alias R="${CRAM_REMOTE_COMMAND:-}"
|
||||
|
||||
$ alias C="${CRAM_REMOTE_COPY:-}"
|
||||
|
||||
Set script parameters and copy the script to device:
|
||||
|
||||
$ S=". /tmp/script_functions_amx.sh"
|
||||
|
||||
$ C ${TESTDIR}/script_functions_amx.sh root@${TARGET_LAN_IP}:/tmp/amx_script_functions.sh
|
||||
Warning: Permanently added '*' (*) to the list of known hosts* (glob)
|
||||
|
||||
$ R logger -t cram "Starting amx-processmonitoring process fail test"
|
||||
|
||||
Pre-test actions, Restart the process service to clear the respawns and other failures before starting with tests:
|
||||
|
||||
$ R "service tr181-mcastd restart > /dev/null 2>&1"
|
||||
$ R "service tr181-pcp restart > /dev/null 2>&1"
|
||||
$ R "service tr181-qos restart > /dev/null 2>&1"
|
||||
$ R "service dhcpv4-manager restart > /dev/null 2>&1"
|
||||
|
||||
Wait 5 seconds for the process to become functional:
|
||||
|
||||
$ sleep 5
|
||||
|
||||
Initialize the ProcessMonitor.Test.i Id for required processes:
|
||||
|
||||
$ Tr181McastId=$(R "ba-cli ProcessMonitor.Test.*.Name? | grep tr181-mcastd | sed -n 's/.*Test\.\([0-9]\+\)\..*/\1/p'")
|
||||
$ Tr181PcpId=$(R "ba-cli ProcessMonitor.Test.*.Name? | grep tr181-pcp | sed -n 's/.*Test\.\([0-9]\+\)\..*/\1/p'")
|
||||
$ WanManagerId=$(R "ba-cli ProcessMonitor.Test.*.Name? | grep tr181-qos | sed -n 's/.*Test\.\([0-9]\+\)\..*/\1/p'")
|
||||
$ Dhcpv4ManagerId=$(R "ba-cli ProcessMonitor.Test.*.Name? | grep dhcpv4-manager | sed -n 's/.*Test\.\([0-9]\+\)\..*/\1/p'")
|
||||
|
||||
Get the initial NumProcessRespawn for all the process:
|
||||
|
||||
$ Tr181McastRespawn=$(R "ba-cli -l ProcessMonitor.Test.$Tr181McastId.NumProcessRespawn? | sed '/^$/d'")
|
||||
$ Tr181PcpRespawn=$(R "ba-cli -l ProcessMonitor.Test.$Tr181PcpId.NumProcessRespawn? | sed '/^$/d'")
|
||||
$ WanManagerRespawn=$(R "ba-cli -l ProcessMonitor.Test.$WanManagerId.NumProcessRespawn? | sed '/^$/d'")
|
||||
$ Dhcpv4ManagerRespawn=$(R "ba-cli -l ProcessMonitor.Test.$Dhcpv4ManagerId.NumProcessRespawn? | sed '/^$/d'")
|
||||
|
||||
Get the initial NumProcessFail for all the process:
|
||||
|
||||
$ Tr181McastFail=$(R "ba-cli -l ProcessMonitor.Test.$Tr181McastId.NumProcessFail? | sed '/^$/d'")
|
||||
$ Tr181PcpFail=$(R "ba-cli -l ProcessMonitor.Test.$Tr181PcpId.NumProcessFail? | sed '/^$/d'")
|
||||
$ WanManagerFail=$(R "ba-cli -l ProcessMonitor.Test.$WanManagerId.NumProcessFail? | sed '/^$/d'")
|
||||
$ Dhcpv4ManagerFail=$(R "ba-cli -l ProcessMonitor.Test.$Dhcpv4ManagerId.NumProcessFail? | sed '/^$/d'")
|
||||
|
||||
Get the initial MaxFailNum for all the process:
|
||||
|
||||
$ Tr181McastMaxFail=$(R "ba-cli -l ProcessMonitor.Test.$Tr181McastId.MaxFailNum? | sed '/^$/d'")
|
||||
$ Tr181PcpMaxFail=$(R "ba-cli -l ProcessMonitor.Test.$Tr181PcpId.MaxFailNum? | sed '/^$/d'")
|
||||
$ WanManagerMaxFail=$(R "ba-cli -l ProcessMonitor.Test.$WanManagerId.MaxFailNum? | sed '/^$/d'")
|
||||
$ Dhcpv4ManagerMaxFail=$(R "ba-cli -l ProcessMonitor.Test.$Dhcpv4ManagerId.MaxFailNum? | sed '/^$/d'")
|
||||
|
||||
Verify process are up and running:
|
||||
|
||||
$ for process_name in "tr181-mcastd" "tr181-pcp" "tr181-qos" "dhcpv4-manager"; do
|
||||
> R "${S} && get_pid \"$process_name\""; done
|
||||
tr181-mcastd.* \d+ (re)
|
||||
tr181-pcp.* \d+ (re)
|
||||
tr181-qos.* \d+ (re)
|
||||
dhcpv4-manager.* \d+ (re)
|
||||
|
||||
Change MaxFail parameter for the processes to higher value:
|
||||
|
||||
$ R "ba-cli -l ProcessMonitor.Test.$Tr181McastId.MaxFailNum=30 | sed '/^$/d'"
|
||||
30
|
||||
|
||||
$ R "ba-cli -l ProcessMonitor.Test.$Tr181PcpId.MaxFailNum=30 | sed '/^$/d'"
|
||||
30
|
||||
|
||||
$ R "ba-cli -l ProcessMonitor.Test.$WanManagerId.MaxFailNum=30 | sed '/^$/d'"
|
||||
30
|
||||
|
||||
$ R "ba-cli -l ProcessMonitor.Test.$Dhcpv4ManagerId.MaxFailNum=30 | sed '/^$/d'"
|
||||
30
|
||||
|
||||
Kill the processes - first kill attempt:
|
||||
|
||||
$ for process_name in tr181-mcastd tr181-pcp tr181-qos dhcpv4-manager; do
|
||||
> R "${S} && kill_process \"$process_name\""; done
|
||||
|
||||
$ sleep 5
|
||||
|
||||
Verify process respawn:
|
||||
|
||||
$ for process_name in "tr181-mcastd" "tr181-pcp" "tr181-qos" "dhcpv4-manager"; do
|
||||
> R "${S} && get_pid \"$process_name\""; done
|
||||
tr181-mcastd.* \d+ (re)
|
||||
tr181-pcp.* \d+ (re)
|
||||
tr181-qos.* \d+ (re)
|
||||
dhcpv4-manager.* \d+ (re)
|
||||
|
||||
Kill the processes - Second kill attempt:
|
||||
|
||||
$ for process_name in "tr181-mcastd" "tr181-pcp" "tr181-qos" "dhcpv4-manager"; do
|
||||
> R "${S} && kill_process \"$process_name\""; done
|
||||
|
||||
$ sleep 5
|
||||
|
||||
Verify process respawn:
|
||||
|
||||
$ for process_name in "tr181-mcastd" "tr181-pcp" "tr181-qos" "dhcpv4-manager"; do
|
||||
> R "${S} && get_pid \"$process_name\""; done
|
||||
tr181-mcastd.* \d+ (re)
|
||||
tr181-pcp.* \d+ (re)
|
||||
tr181-qos.* \d+ (re)
|
||||
dhcpv4-manager.* \d+ (re)
|
||||
|
||||
Kill the processes - third kill attempt:
|
||||
|
||||
$ for process_name in "tr181-mcastd" "tr181-pcp" "tr181-qos" "dhcpv4-manager"; do
|
||||
> R "${S} && kill_process \"$process_name\""; done
|
||||
|
||||
$ sleep 5
|
||||
|
||||
Verify process respawn:
|
||||
|
||||
$ for process_name in "tr181-mcastd" "tr181-pcp" "tr181-qos" "dhcpv4-manager"; do
|
||||
> R "${S} && get_pid \"$process_name\""; done
|
||||
tr181-mcastd.* \d+ (re)
|
||||
tr181-pcp.* \d+ (re)
|
||||
tr181-qos.* \d+ (re)
|
||||
dhcpv4-manager.* \d+ (re)
|
||||
|
||||
Kill the processes - Fourth kill attempt, no more respawns of failed process by procd and NumProcessFail will increment:
|
||||
|
||||
$ for process_name in "tr181-mcastd" "tr181-pcp" "tr181-qos" "dhcpv4-manager"; do
|
||||
> R "${S} && kill_process \"$process_name\""; done
|
||||
|
||||
$ sleep 5
|
||||
|
||||
Verify NumProcessFail is incremented for process fail:
|
||||
|
||||
$ R "${S} && verify_num_Process_fail $Tr181McastId $((Tr181McastFail+1))"
|
||||
tr181-mcastd NumProcessFail PASS
|
||||
|
||||
$ R "${S} && verify_num_Process_fail $Tr181PcpId $((Tr181PcpFail+1))"
|
||||
tr181-pcp NumProcessFail PASS
|
||||
|
||||
$ R "${S} && verify_num_Process_fail $WanManagerId $((WanManagerFail+1))"
|
||||
tr181-qos NumProcessFail PASS
|
||||
|
||||
$ R "${S} && verify_num_Process_fail $Dhcpv4ManagerId $((Dhcpv4ManagerFail+1))"
|
||||
dhcpv4-manager NumProcessFail PASS
|
||||
|
||||
Verify amx-process monitor has updated the NumProcessRespawn after process respawn for all kill attempts above:
|
||||
|
||||
$ R "${S} && verify_respawn_value $Tr181McastId $((Tr181McastRespawn+3))"
|
||||
tr181-mcastd NumProcessRespawn PASS
|
||||
|
||||
$ R "${S} && verify_respawn_value $Tr181PcpId $((Tr181PcpRespawn+3))"
|
||||
tr181-pcp NumProcessRespawn PASS
|
||||
|
||||
$ R "${S} && verify_respawn_value $WanManagerId $((WanManagerRespawn+3))"
|
||||
tr181-qos NumProcessRespawn PASS
|
||||
|
||||
$ R "${S} && verify_respawn_value $Dhcpv4ManagerId $((Dhcpv4ManagerRespawn+3))"
|
||||
dhcpv4-manager NumProcessRespawn PASS
|
||||
|
||||
Clean-up Revert MaxFail parameter for the process to initial value:
|
||||
|
||||
$ R "ba-cli -l ProcessMonitor.Test.$Tr181McastId.MaxFailNum=$Tr181McastMaxFail | sed '/^$/d'"
|
||||
\d+ (re)
|
||||
|
||||
$ R "ba-cli -l ProcessMonitor.Test.$Tr181PcpId.MaxFailNum=$Tr181PcpMaxFail | sed '/^$/d'"
|
||||
\d+ (re)
|
||||
|
||||
$ R "ba-cli -l ProcessMonitor.Test.$WanManagerId.MaxFailNum=$WanManagerMaxFail | sed '/^$/d'"
|
||||
\d+ (re)
|
||||
|
||||
$ R "ba-cli -l ProcessMonitor.Test.$Dhcpv4ManagerId.MaxFailNum=$Dhcpv4ManagerMaxFail | sed '/^$/d'"
|
||||
\d+ (re)
|
||||
|
||||
Restart process service to clear the respawns from above tests:
|
||||
|
||||
$ R "service tr181-mcastd restart > /dev/null 2>&1"
|
||||
$ R "service tr181-pcp restart > /dev/null 2>&1"
|
||||
$ R "service tr181-qos restart > /dev/null 2>&1"
|
||||
$ R "service dhcpv4-manager restart > /dev/null 2>&1"
|
||||
|
||||
$ R logger -t cram "Amx-processmonitoring process fail test finished"
|
||||
41
.gitlab/tests/cram/generic/acceleration-plan-components/025-process-monitor.t
Normal file → Executable file
41
.gitlab/tests/cram/generic/acceleration-plan-components/025-process-monitor.t
Normal file → Executable file
@ -18,6 +18,11 @@ Check the root datamodel settings:
|
||||
}
|
||||
}
|
||||
|
||||
Change Respawn timeout on tr181-led to allow testing with Amx ProcessMonitor:
|
||||
|
||||
$ R "export respawn_timeout=60"
|
||||
$ R "/etc/init.d/tr181-led restart"
|
||||
|
||||
Check that only one instance of tr181-led manager is running:
|
||||
|
||||
$ R "pgrep -cf 'tr181-led'"
|
||||
@ -29,9 +34,10 @@ Get current tr181-led manager PID:
|
||||
|
||||
Add test for checking tr181-leds manager using PID:
|
||||
|
||||
$ R "ba-cli 'ProcessMonitor.Test+{Type=Process,Name=tr181-led,Subject=/var/run/tr181-led.pid,FailAction=RESTART,TestInterval=2,MaxFailNum=1}' | grep -v '^>'"
|
||||
$ R "ba-cli 'ProcessMonitor.Test+{Type=Process,Name=tr181-led,Subject=/var/run/tr181-led.pid,FailAction=RESTART,TestInterval=30,MaxFailNum=1,ProcessMonitoringEnabled=0}' | grep -v '^>'"
|
||||
ProcessMonitor.Test.\d+. (re)
|
||||
|
||||
|
||||
Check the LED manager check datamodel settings:
|
||||
|
||||
$ R "ba-cli --json ProcessMonitor.Test.[Name==\\\"tr181-led\\\"].? | sed -n '2p'" | jq --sort-keys '.[0]'
|
||||
@ -45,28 +51,32 @@ Check the LED manager check datamodel settings:
|
||||
"LastFailAction": "0001-01-01T00:00:00Z",
|
||||
"LastFailReason": "Error_None",
|
||||
"LastSuccess": "0001-01-01T00:00:00Z",
|
||||
"LogEntryEnabled": 1,
|
||||
"MaxFailDuration": -1,
|
||||
"MaxFailNum": 1,
|
||||
"MaxFailedDuration": 0,
|
||||
"MaxNumFailed": 0,
|
||||
"Name": "tr181-led",
|
||||
"NumFailActions": 0,
|
||||
"NumFailed": 0,
|
||||
"NumProcessFail": -1,
|
||||
"NumProcessRespawn": -1,
|
||||
"ProcessMonitoringEnabled": 0,
|
||||
"RebootAfterRestartThreshold": 0,
|
||||
"Subject": "/var/run/tr181-led.pid",
|
||||
"SuccessfulSince": "0001-01-01T00:00:00Z",
|
||||
"TestInterval": 2,
|
||||
"TestInterval": 30,
|
||||
"TestIntervalMultiplier": 1,
|
||||
"TestResetInterval": 3600,
|
||||
"Type": "Process"
|
||||
},
|
||||
"ProcessMonitor.Test.\d+.ProcessRespawnParams.": { (re)
|
||||
"RetryAttempts": -*\d+, (re)
|
||||
"Threshold": -*\d+, (re)
|
||||
"Timeout": -*\d+ (re)
|
||||
}
|
||||
}
|
||||
|
||||
Shorthen the test cycle duration to 1 second:
|
||||
|
||||
$ current_cycle_duration="$(R 'ba-cli -lj "ProcessMonitor.CycleDuration?"' | jq -e '.[] | .[] | .CycleDuration')"
|
||||
$ R "ba-cli -l -j 'ProcessMonitor.CycleDuration=1'"
|
||||
|
||||
[{"ProcessMonitor.":{"CycleDuration":1}}]
|
||||
|
||||
Kill the LED manager service:
|
||||
|
||||
$ R "kill \$(cat /var/run/tr181-led.pid)"
|
||||
@ -78,10 +88,9 @@ Check that LED manager is not running:
|
||||
0
|
||||
[1]
|
||||
|
||||
Calculate a timeout with (number_of_tests * test_interval * 2s):
|
||||
Calculate a timeout with tr181-led current test interval:
|
||||
|
||||
$ number_of_tests="$(R 'ba-cli -lj "ProcessMonitor.NumberOfTest?"' | jq -e '.[] | .[] | .NumberOfTest')"
|
||||
$ reactivation_timeout=$((number_of_tests*2*10))
|
||||
$ reactivation_timeout="$(R 'ba-cli -lj "ProcessMonitor.Test.[Name==\"tr181-led\"].CurrentTestInterval?"' | jq -e '.[] | .[] | .CurrentTestInterval')"
|
||||
|
||||
Check that ProcessMonitor have restarted the LED manager properly:
|
||||
|
||||
@ -101,9 +110,7 @@ Cleanup:
|
||||
|
||||
$ R "ba-cli --json ProcessMonitor.Test.[Name==\\\"tr181-led\\\"].-" >/dev/null
|
||||
|
||||
Revert back the test cycle duration:
|
||||
Revert back the respawn timeout on tr181-led:
|
||||
|
||||
$ R "ba-cli -l 'ProcessMonitor.CycleDuration=$current_cycle_duration'"
|
||||
|
||||
\d+ (re)
|
||||
|
||||
$ R "export respawn_timeout=5"
|
||||
$ R "/etc/init.d/tr181-led restart"
|
||||
|
||||
@ -0,0 +1,109 @@
|
||||
#!/bin/ash
|
||||
CLI="ba-cli -l "
|
||||
CLI_JSON="ba-cli -j -l"
|
||||
|
||||
# Performs pkill for the given process name
|
||||
kill_process() {
|
||||
pkill -P 1 -f "$1"
|
||||
}
|
||||
|
||||
# Retrieves the process ID for given process name
|
||||
get_pid() {
|
||||
echo "$1 "$(pgrep -P 1 -f "$1")
|
||||
}
|
||||
|
||||
# Verifies NumProcessRespawn against provided value
|
||||
verify_process_fail_update() {
|
||||
respawn=$(${CLI} "ProcessMonitor.Test.$1.NumProcessRespawn?" | sed '/^$/d')
|
||||
process_name=$(${CLI} "ProcessMonitor.Test.$1.Name?" | sed '/^$/d')
|
||||
if [ $respawn -eq $2 ]; then
|
||||
echo "$process_name NumProcessRespawn PASS"
|
||||
else
|
||||
echo "FAIL $process_name, expected ProcessMonitor.Test.$1.NumProcessRespawn value: $2 found: $respawn"
|
||||
fi
|
||||
MaxNumFailed=$(${CLI} "ProcessMonitor.Test.$1.MaxNumFailed?" | sed '/^$/d')
|
||||
if [ $MaxNumFailed -eq 0 ]; then
|
||||
echo "FAIL $process_name, Expected ProcessMonitor.Test.$1.MaxNumFailed to be updated but found $MaxNumFailed"
|
||||
else
|
||||
echo "$process_name MaxNumFailed PASS"
|
||||
fi
|
||||
}
|
||||
|
||||
# Verifies ProcessMonitoringEnabled is enabled, LastFailReason cleared
|
||||
# MaxNumFailed, NumProcessFail and NumProcessRespawn are cleared
|
||||
verify_value_reset() {
|
||||
ProcessMonitoringEnabled=$(${CLI} "ProcessMonitor.Test.$1.ProcessMonitoringEnabled?" | sed '/^$/d')
|
||||
process_name=$(${CLI} "ProcessMonitor.Test.$1.Name?" | sed '/^$/d')
|
||||
if [ $ProcessMonitoringEnabled -eq 1 ]; then
|
||||
echo "$process_name ProcessMonitoringEnabled PASS"
|
||||
else
|
||||
echo "FAIL $process_name, ProcessMonitor.Test.$1.ProcessMonitoringEnabled - $ProcessMonitoringEnabled " \
|
||||
"not enabled after reset"
|
||||
fi
|
||||
|
||||
MaxNumFailed=$(${CLI} "ProcessMonitor.Test.$1.MaxNumFailed?" | sed '/^$/d')
|
||||
if [ $MaxNumFailed -eq 0 ]; then
|
||||
echo "$process_name MaxNumFailed PASS"
|
||||
else
|
||||
echo "FAIL $process_name, ProcessMonitor.Test.$1.MaxNumFailed - $MaxNumFailed not reset"
|
||||
fi
|
||||
|
||||
NumProcessFail=$(${CLI} "ProcessMonitor.Test.$1.NumProcessFail?" | sed '/^$/d')
|
||||
if [ $NumProcessFail -eq 0 ]; then
|
||||
echo "$process_name NumProcessFail PASS"
|
||||
else
|
||||
echo "FAIL $process_name, ProcessMonitor.Test.$1.NumProcessFail - $NumProcessFail not reset"
|
||||
fi
|
||||
|
||||
NumProcessRespawn=$(${CLI} "ProcessMonitor.Test.$1.NumProcessRespawn?" | sed '/^$/d')
|
||||
if [ $NumProcessRespawn -eq 0 ]; then
|
||||
echo "$process_name NumProcessRespawn PASS"
|
||||
else
|
||||
echo "FAIL $process_name, ProcessMonitor.Test.$1.NumProcessRespawn - $NumProcessRespawn not reset"
|
||||
fi
|
||||
}
|
||||
|
||||
# Calls reset method for given ProcessMonitor.Test.Id
|
||||
reset_amx_process_monitoring() {
|
||||
reset_output=$(${CLI_JSON} "ProcessMonitor.Test.$1.reset()" | sed '/^$/d' | tail -n 1)
|
||||
process_name=$(${CLI} "ProcessMonitor.Test.$1.Name?" | sed '/^$/d')
|
||||
if [ "[\"\"]" == $reset_output ]; then
|
||||
echo "$process_name reset OK"
|
||||
else
|
||||
echo "$process_name reset Failed"
|
||||
fi
|
||||
}
|
||||
|
||||
# Changes subject of the given ProcessMonitor.Test.Id
|
||||
change_process_subject() {
|
||||
current_time_stamp=$(date +"%Y%m%d_%H%M%S")
|
||||
change_process_output=$(${CLI} "ProcessMonitor.Test.$1.Subject=\"test_subject_$1_$current_time_stamp\"" | sed '/^$/d')
|
||||
change_process_name=$(${CLI} "ProcessMonitor.Test.$1.Name?" | sed '/^$/d')
|
||||
if [ test_subject_$1_$current_time_stamp == $change_process_output ]; then
|
||||
echo "$change_process_name subject change OK"
|
||||
else
|
||||
echo "$change_process_name subject change Failed"
|
||||
fi
|
||||
}
|
||||
|
||||
# Verify NumProcessRespawn against given value
|
||||
verify_respawn_value() {
|
||||
respawn=$(${CLI} "ProcessMonitor.Test.$1.NumProcessRespawn?" | sed '/^$/d')
|
||||
process_name=$(${CLI} "ProcessMonitor.Test.$1.Name?" | sed '/^$/d')
|
||||
if [ $respawn -eq $2 ]; then
|
||||
echo "$process_name NumProcessRespawn PASS"
|
||||
else
|
||||
echo "FAIL $process_name, expected ProcessMonitor.Test.$1.NumProcessRespawn value: $2 found: $respawn"
|
||||
fi
|
||||
}
|
||||
|
||||
# Verifies NumProcessFail against expected value
|
||||
verify_num_Process_fail() {
|
||||
num_process_fail=$(${CLI} "ProcessMonitor.Test.$1.NumProcessFail?" | sed '/^$/d')
|
||||
process_name=$(${CLI} "ProcessMonitor.Test.$1.Name?" | sed '/^$/d')
|
||||
if [ $num_process_fail -eq $2 ]; then
|
||||
echo "$process_name NumProcessFail PASS"
|
||||
else
|
||||
echo "Fail $process_name, Expected value for ProcessMonitor.Test.$1.NumProcessFail: $2, found: $num_process_fail"
|
||||
fi
|
||||
}
|
||||
@ -11,7 +11,7 @@ feeds:
|
||||
|
||||
- name: feed_prplos
|
||||
uri: https://gitlab.com/prpl-foundation/prplos/feeds/feed-prplos.git
|
||||
revision: main@c8aa66f717226272627c6ec08f4758245b41bbc7
|
||||
revision: main@66da6abf41800504cc9a0c0bbe57628f914bec08
|
||||
|
||||
additional_packages:
|
||||
- feed: packages
|
||||
|
||||
Loading…
Reference in New Issue
Block a user