maple/prplos
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

tr069-connectionrequest: add cram tests

Browse Source 
Add cram tests for tr069-connectionrequest component

References: PCF-1867, FEAT-112

Signed-off-by: Volodymyr Martysh <v.martysh@inango-systems.com>
This commit is contained in:
Volodymyr Martysh 2025-08-18 11:56:22 +03:00 committed by Matthias Franck
parent e61e1d70e5
commit b1293a0b31
3 changed files with 118 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

114
.gitlab/tests/cram/generic/acceleration-plan-components/152-tr069-connectionrequest.t Normal file
View File

@ -0,0 +1,114 @@
Define R() for access to DUT
$ R() { ${CRAM_REMOTE_COMMAND:-} "$@"; }
Define G() hop via DUT -> GW
$ G() { ssh -y root@192.168.1.1 "$@"; }
Skip the test because it uses a reboot command and requires long delays in some of the steps:
$ exit 80
AllowReservedAddr on Gataway:
$ G 'ba-cli "Device.UPnP.X_PRPLWARE-COM_IGDConfig.AllowReservedAddr=1" | sed -e "/^> /d"' 2>/dev/null
Device.UPnP.X_PRPLWARE-COM_IGDConfig.
Device.UPnP.X_PRPLWARE-COM_IGDConfig.AllowReservedAddr=1
Switch to IPv4 mode
$ R 'ba-cli "ManagementServer.URL=\"http://192.168.77.161:50555/\""' >/dev/null 2>&1
Restart tr069-connectionrequest
$ R 'service tr069-connectionrequest stop' 2>/dev/null
$ sleep 5
$ R 'service tr069-connectionrequest start' 2>/dev/null
$ sleep 30
Check that tr069-connectionrequest is enabled and running by default:
$ R 'ps ax | grep -q [t]r069-connectionrequest && echo OK || echo FAIL'
OK
Check that port mapping is enabled on the GW:
$ CONNREQ_PORT=$(R 'ba-cli "ManagementServer.ConnRequest._get()"' 2>/dev/null | sed -n 's/.*ConnRequestPort = \([0-9]\+\),/\1/p')
$ G "ba-cli 'Device.NAT.PortMapping.[InternalClient==\"$TARGET_LAN_IP\" && InternalPort==$CONNREQ_PORT].Status?'" 2>/dev/null | grep -F Enable >/dev/null && echo OK || echo FAIL
OK
Check that ConnectionRequestURL was set correctly:
$ ORIG_WAN_IP=$(G 'ba-cli -l "Device.IP.Interface.wan.IPv4Address.1.IPAddress?"')
$ R 'ba-cli "ManagementServer.ConnectionRequestURL?" | sed -e "/^> /d" | grep -F "http://$ORIG_WAN_IP" >/dev/null && echo OK || echo FAIL'
OK
Wait at least 300 seconds to check PortMapping keepalive:
$ sleep 300
Check that port mapping still on the GW after 300 sec.:
$ CONNREQ_PORT=$(R 'ba-cli "ManagementServer.ConnRequest._get()"' 2>/dev/null | sed -n 's/.*ConnRequestPort = \([0-9]\+\),/\1/p')
$ G "ba-cli 'Device.NAT.PortMapping.[InternalClient==\"$TARGET_LAN_IP\" && InternalPort==$CONNREQ_PORT].Status?'" 2>/dev/null | grep -F Enable >/dev/null && echo OK || echo FAIL
OK
Check that ConnectionRequestURL still correctly after 300 sec:
$ ORIG_WAN_IP=$(G 'ba-cli -l "Device.IP.Interface.wan.IPv4Address.1.IPAddress?"')
$ R 'ba-cli "ManagementServer.ConnectionRequestURL?" | sed -e "/^> /d" | grep -F "http://$ORIG_WAN_IP" >/dev/null && echo OK || echo FAIL'
OK
Check that service subscribed to IGD changes:
$ NEW_WAN_IP=91.90.40.100
$ G ba-cli "'IP.Interface.wan.IPv4Address.1._set\(parameters=\{IPAddress=\"$NEW_WAN_IP\"\}\)'" >/dev/null 2>&1
$ sleep 3
Check that ConnectionRequestURL contain new WAN IP:
$ R 'ba-cli "ManagementServer.ConnectionRequestURL?" | sed -e "/^> /d" | grep -F "http://$NEW_WAN_IP" >/dev/null && echo OK || echo FAIL'
OK
Return original WAN IP back:
$ G ba-cli "'IP.Interface.wan.IPv4Address.1._set\(parameters=\{IPAddress=\"$ORIG_WAN_IP\"\}\)'" >/dev/null 2>&1
Check GW device has rebooted
$ G 'reboot' 2>/dev/null
$ sleep 120
Check that port mapping is enabled on the GW after GW reboot:
$ CONNREQ_PORT=$(R 'ba-cli "ManagementServer.ConnRequest._get()"' 2>/dev/null | sed -n 's/.*ConnRequestPort = \([0-9]\+\),/\1/p')
$ G "ba-cli 'Device.NAT.PortMapping.[InternalClient==\"$TARGET_LAN_IP\" && InternalPort==$CONNREQ_PORT].Status?'" 2>/dev/null | grep -F Enable >/dev/null && echo OK || echo FAIL
OK
Check that ConnectionRequestURL was set correctly after GW reboot:
$ ORIG_WAN_IP=$(G 'ba-cli -l "Device.IP.Interface.wan.IPv4Address.1.IPAddress?"')
$ R 'ba-cli "ManagementServer.ConnectionRequestURL?" | sed -e "/^> /d" | grep -F "http://$ORIG_WAN_IP" >/dev/null && echo OK || echo FAIL'
OK
Check when IGD service on GW has stopped:
$ G 'service tr181-upnp stop' 2>/dev/null
$ sleep 10
Check that ConnectionRequestURL is FAIL after stop tr181-upnp:
$ ORIG_WAN_IP=$(G 'ba-cli -l "Device.IP.Interface.wan.IPv4Address.1.IPAddress?"')
$ R 'ba-cli "ManagementServer.ConnectionRequestURL?" | sed -e "/^> /d" | grep -F "http://$ORIG_WAN_IP" >/dev/null && echo OK || echo FAIL'
FAIL
Check when IGD service on GW has started:
$ G 'service tr181-upnp start' 2>/dev/null
$ sleep 10
Check that ConnectionRequestURL is OK after start tr181-upnp:
$ ORIG_WAN_IP=$(G 'ba-cli -l "Device.IP.Interface.wan.IPv4Address.1.IPAddress?"')
$ R 'ba-cli "ManagementServer.ConnectionRequestURL?" | sed -e "/^> /d" | grep -F "http://$ORIG_WAN_IP" >/dev/null && echo OK || echo FAIL'
OK

4
.gitlab/tests/cram/mxl25641-hdk-6/005-build-config.t
View File

@ -523,7 +523,7 @@ Assure expected build configuration (PCF-1413):
CONFIG_PACKAGE_libudev-zero=y
CONFIG_PACKAGE_libugwhelper=y
CONFIG_PACKAGE_libunbound-prpl=y
CONFIG_PACKAGE_libupnp=y
CONFIG_PACKAGE_libupnp-prpl=y
CONFIG_PACKAGE_liburcu=y
CONFIG_PACKAGE_libusb-1.0=y
CONFIG_PACKAGE_libusp=y
@ -865,7 +865,7 @@ Assure expected build configuration (PCF-1413):
CONFIG_SAH_AMX_SSH_SERVER=y
CONFIG_SAH_AMX_SSH_SERVER_ORDER=25
CONFIG_SAH_AMX_TR069_MANAGER=y
CONFIG_SAH_AMX_TR069_MANAGER_ORDER=98
CONFIG_SAH_AMX_TR069_MANAGER_ORDER=97
CONFIG_SAH_AMX_TR069_MANAGER_USE_GSDM=y
CONFIG_SAH_AMX_TR181_BRIDGING=y
CONFIG_SAH_AMX_TR181_BRIDGING_MSTPD=y

4
.gitlab/tests/cram/wnc-freedom/005-build-config.t
View File

@ -324,7 +324,7 @@ Assure expected build configuration (PCF-1413):
CONFIG_PACKAGE_libtr69-engine=y
CONFIG_PACKAGE_libudev-zero=y
CONFIG_PACKAGE_libunbound-prpl=y
CONFIG_PACKAGE_libupnp=y
CONFIG_PACKAGE_libupnp-prpl=y
CONFIG_PACKAGE_liburcu=y
CONFIG_PACKAGE_libusb-1.0=y
CONFIG_PACKAGE_libusp=y
@ -627,7 +627,7 @@ Assure expected build configuration (PCF-1413):
CONFIG_SAH_AMX_SSH_SERVER=y
CONFIG_SAH_AMX_SSH_SERVER_ORDER=25
CONFIG_SAH_AMX_TR069_MANAGER=y
CONFIG_SAH_AMX_TR069_MANAGER_ORDER=98
CONFIG_SAH_AMX_TR069_MANAGER_ORDER=97
CONFIG_SAH_AMX_TR069_MANAGER_USE_GSDM=y
CONFIG_SAH_AMX_TR181_BRIDGING=y
CONFIG_SAH_AMX_TR181_BRIDGING_MSTPD=y