ci: cram: test WPA-Personal-Compatibility interaction with prplMesh
prplMesh controller can read configuration from pwhm or from NBAPI. This test covers both input methods. Initial state assumption (based on default configuration) : Controller is reading config from pwhm Operations : Restart prplMesh Enable Priv VAPs Read Security.ModeEnabled - default values Write WPA3-Personal-Compatibility to enabled VAPs - 3 Priv VAPs Check that Controller Reads new values, propagates them to the Agent, and Agent does not overwrite them not-overwrite is a double negation that means agent writes the same value as before. A change would imply that either: 1. Agent incorrectly reported capability - Controller downgraded security mode 2. Controller did not read the configuration and pushed a teardown for the Radiox instead Switch Controller to NBAPI configuration Push WPA3-Personal from NBAPI Push WPA3-Personal-Compatibility from NBAPI Restore Config to default values Increase the testbed timeout. 5min are required to run the test. Closes : PPM-3352 Signed-off-by: Iacob Juc <iacob.juc_ext@softathome.com> Signed-off-by: Houssem Dafdouf <houssem.dafdouf_ext@softathome.com>
This commit is contained in:
Iacob Juc
Hela Saadani
parent
f8c9ef264b
commit
fbc039df76
@ -1,7 +1,7 @@
|
||||
.testbed:
|
||||
stage: run
|
||||
image: "$CI_REGISTRY_IMAGE/$CI_DESIGNATED_BRANCH_SLUG/testbed:latest"
|
||||
timeout: 58 minutes
|
||||
timeout: 63 minutes
|
||||
rules:
|
||||
- if: '$CI_PIPELINE_SOURCE == "schedule"'
|
||||
when: never
|
||||
|
||||
255
.gitlab/tests/cram/mxl25641-hdk-6/113-prplmesh-wpa3-cm.t
Normal file
255
.gitlab/tests/cram/mxl25641-hdk-6/113-prplmesh-wpa3-cm.t
Normal file
@ -0,0 +1,255 @@
|
||||
Create R alias:
|
||||
|
||||
$ alias R="${CRAM_REMOTE_COMMAND:-}"
|
||||
$ . "${TESTDIR}/../scripts/wifi.sh"
|
||||
|
||||
$ R logger -t cram "Starting prplMesh WPA3-CM test ..."
|
||||
|
||||
$ R "amx_wait_for Device.WiFi"
|
||||
|
||||
Set AutoChannelEnable=0 on all WiFi.Radio. interfaces:
|
||||
|
||||
$ wifi_dm "Radio.*.AutoChannelEnable=0"
|
||||
WiFi.Radio.1.AutoChannelEnable=0
|
||||
WiFi.Radio.2.AutoChannelEnable=0
|
||||
WiFi.Radio.3.AutoChannelEnable=0
|
||||
|
||||
Set channel to a non DFS one:
|
||||
|
||||
$ wifi_dm "Radio.2.Channel=36"
|
||||
WiFi.Radio.2.Channel=36 (re)
|
||||
|
||||
Check default SecMode:
|
||||
|
||||
$ R logger -t cram "Check default SecMode"
|
||||
|
||||
$ wifi_dm "AccessPoint.1.Security.ModeEnabled?"
|
||||
WiFi.AccessPoint.1.Security.ModeEnabled="WPA2-WPA3-Personal"
|
||||
|
||||
$ wifi_dm "AccessPoint.2.Security.ModeEnabled?"
|
||||
WiFi.AccessPoint.2.Security.ModeEnabled="WPA2-WPA3-Personal"
|
||||
|
||||
$ wifi_dm "AccessPoint.3.Security.ModeEnabled?"
|
||||
WiFi.AccessPoint.3.Security.ModeEnabled="WPA3-Personal"
|
||||
|
||||
Check if private/guest VAPs contain WPA3-Personal-Compatibility in the Security.ModesAvailable list:
|
||||
|
||||
$ wifi_dm "AccessPoint.*.Security.ModesAvailable?" | sed -n 's/^\(WiFi\.AccessPoint\.[1-6]\+\.Security\.ModesAvailable\).*WPA3-Personal-Compatibility.*/\1 has WPA3-Personal-Compatibility mode/p'
|
||||
WiFi.AccessPoint.1.Security.ModesAvailable has WPA3-Personal-Compatibility mode
|
||||
WiFi.AccessPoint.2.Security.ModesAvailable has WPA3-Personal-Compatibility mode
|
||||
WiFi.AccessPoint.3.Security.ModesAvailable has WPA3-Personal-Compatibility mode
|
||||
WiFi.AccessPoint.4.Security.ModesAvailable has WPA3-Personal-Compatibility mode
|
||||
WiFi.AccessPoint.5.Security.ModesAvailable has WPA3-Personal-Compatibility mode
|
||||
WiFi.AccessPoint.6.Security.ModesAvailable has WPA3-Personal-Compatibility mode
|
||||
|
||||
Configure controller for NBAPI configuration:
|
||||
|
||||
$ R logger -t cram "Stop prplmesh"
|
||||
|
||||
$ R "( /etc/init.d/prplmesh 2>&1 > /dev/null stop ; sleep 2 )" 2>&1 > /dev/null
|
||||
$ R "sed -i 's/use_dataelements_vap_configs=0/use_dataelements_vap_configs=1/g' /opt/prplmesh/config/beerocks_controller.conf"
|
||||
$ R logger -t cram "Restart prplmesh"
|
||||
$ R "( /etc/init.d/prplmesh gateway_mode ; sleep 2 ) > /tmp/prplmesh-gw-mode.log 2>&1 ; logger -t prplmesh-gateway-mode < /tmp/prplmesh-gw-mode.log"
|
||||
$ R "amx_wait_for X_PRPLWARE-COM_WiFiController.Network.Device.1"
|
||||
|
||||
$ sleep 10
|
||||
|
||||
Set WPA3-Personal-Compatibility and check that : 1. Controller reads it correctly, 2. triggers reconfiguration, and 3. agent applies the correct value:
|
||||
|
||||
$ wifi_dm "AccessPoint.1.Security.ModeEnabled=\"WPA3-Personal-Compatibility\""
|
||||
WiFi.AccessPoint.1.Security.ModeEnabled="WPA3-Personal-Compatibility"
|
||||
|
||||
$ wifi_dm "AccessPoint.2.Security.ModeEnabled=\"WPA3-Personal-Compatibility\""
|
||||
WiFi.AccessPoint.2.Security.ModeEnabled="WPA3-Personal-Compatibility"
|
||||
|
||||
$ wifi_dm "AccessPoint.3.Security.ModeEnabled=\"WPA3-Personal-Compatibility\""
|
||||
WiFi.AccessPoint.3.Security.ModeEnabled="WPA3-Personal-Compatibility"
|
||||
|
||||
Enable private vaps:
|
||||
|
||||
$ R logger -t cram "Enable private vaps"
|
||||
|
||||
$ enable_ap_sync 1 1
|
||||
AccessPoint.\d+.Enable=1 (re)
|
||||
|
||||
$ enable_ap_sync 2 1
|
||||
AccessPoint.\d+.Enable=1 (re)
|
||||
|
||||
$ enable_ap_sync 3 1
|
||||
AccessPoint.\d+.Enable=1 (re)
|
||||
|
||||
$ check_ap_ref_ssid 1 Up
|
||||
WiFi.AccessPoint.1 SSID Reference is Up
|
||||
|
||||
$ check_ap_ref_ssid 2 Up
|
||||
WiFi.AccessPoint.2 SSID Reference is Up
|
||||
|
||||
$ check_ap_ref_ssid 3 Up
|
||||
WiFi.AccessPoint.3 SSID Reference is Up
|
||||
|
||||
Create one instances of Network.AccessPoint with WPA3-Personal enabled and push it to the agent:
|
||||
|
||||
$ R logger -t cram "Create instances of Network.AccessPoint and push them to the agent"
|
||||
|
||||
$ R "ba-cli \"X_PRPLWARE-COM_WiFiController.Network.AccessPoint+(Band2_4G=1,Band5GH=1,Band5GL=1,Band6G=1,MultiApMode=\"Fronthaul+Backhaul\",SSID=\"SSID_WPA3CM\",Security.ModeEnabled=\"WPA3-Personal\",Security.KeyPassphrase=\"password\",Enable=1)\"" | tail -n +2 | sed '/^$/d'
|
||||
X_PRPLWARE-COM_WiFiController.Network.AccessPoint.* (re)
|
||||
|
||||
$ R "ba-cli \"X_PRPLWARE-COM_WiFiController.Network.AccessPointCommit()\"" | tail -n +2 | sed '/^$/d'
|
||||
X_PRPLWARE-COM_WiFiController.Network.AccessPointCommit() returned
|
||||
[
|
||||
""
|
||||
]
|
||||
|
||||
$ sleep 10
|
||||
|
||||
Check that 3 SSID instances are still operating:
|
||||
|
||||
$ R logger -t cram "Check private vaps"
|
||||
|
||||
$ check_ap_ref_ssid 1 Up
|
||||
WiFi.AccessPoint.1 SSID Reference is Up
|
||||
|
||||
$ check_ap_ref_ssid 2 Up
|
||||
WiFi.AccessPoint.2 SSID Reference is Up
|
||||
|
||||
$ check_ap_ref_ssid 3 Up
|
||||
WiFi.AccessPoint.3 SSID Reference is Up
|
||||
|
||||
Check config from Nbapi AccessPoint is correctly applied : SSID / Security.ModeEnabled:
|
||||
|
||||
$ wifi_dm "AccessPoint.1.SSIDReference+.SSID?"
|
||||
Device.WiFi.SSID.\d+.SSID="SSID_WPA3CM" (re)
|
||||
|
||||
$ wifi_dm "AccessPoint.2.SSIDReference+.SSID?"
|
||||
Device.WiFi.SSID.\d+.SSID="SSID_WPA3CM" (re)
|
||||
|
||||
$ wifi_dm "AccessPoint.3.SSIDReference+.SSID?"
|
||||
Device.WiFi.SSID.\d+.SSID="SSID_WPA3CM" (re)
|
||||
|
||||
Check if agent overrides the security mode:
|
||||
|
||||
$ wifi_dm "AccessPoint.1.Security.ModeEnabled?"
|
||||
WiFi.AccessPoint.1.Security.ModeEnabled="WPA3-Personal"
|
||||
|
||||
$ wifi_dm "AccessPoint.2.Security.ModeEnabled?"
|
||||
WiFi.AccessPoint.2.Security.ModeEnabled="WPA3-Personal"
|
||||
|
||||
$ wifi_dm "AccessPoint.3.Security.ModeEnabled?"
|
||||
WiFi.AccessPoint.3.Security.ModeEnabled="WPA3-Personal"
|
||||
|
||||
Push WPA3-Personal-Compatibility:
|
||||
|
||||
$ R logger -t cram "Push WPA3-Personal-Compatibility"
|
||||
|
||||
$ R "ba-cli -l X_PRPLWARE-COM_WiFiController.Network.AccessPoint.1.Security.ModeEnabled=\"WPA3-Personal-Compatibility\"" | sed '/^$/d'
|
||||
WPA3-Personal-Compatibility
|
||||
|
||||
$ R "ba-cli \"X_PRPLWARE-COM_WiFiController.Network.AccessPointCommit()\"" | tail -n +2 | sed '/^$/d'
|
||||
X_PRPLWARE-COM_WiFiController.Network.AccessPointCommit() returned
|
||||
[
|
||||
""
|
||||
]
|
||||
|
||||
$ sleep 5
|
||||
|
||||
Check if agent overrides the security mode:
|
||||
|
||||
$ wifi_dm "AccessPoint.1.Security.ModeEnabled?"
|
||||
WiFi.AccessPoint.1.Security.ModeEnabled="WPA3-Personal-Compatibility"
|
||||
|
||||
$ wifi_dm "AccessPoint.2.Security.ModeEnabled?"
|
||||
WiFi.AccessPoint.2.Security.ModeEnabled="WPA3-Personal-Compatibility"
|
||||
|
||||
$ wifi_dm "AccessPoint.3.Security.ModeEnabled?"
|
||||
WiFi.AccessPoint.3.Security.ModeEnabled="WPA3-Personal-Compatibility"
|
||||
|
||||
Check hostapd configuration file:
|
||||
(RSN Override 1 is set, RSN Override 2 shouldn't be present)
|
||||
|
||||
$ itf=$(R "ba-cli -l WiFi.AccessPoint.1.SSIDReference+.Name?" | sed '/^$/d')
|
||||
$ get_hapd_config $itf rsn_override_key_mgmt
|
||||
SAE
|
||||
|
||||
$ get_hapd_config $itf rsn_override_key_mgmt_2
|
||||
Option 'rsn_override_key_mgmt_2' not found
|
||||
|
||||
$ itf=$(R "ba-cli -l WiFi.AccessPoint.2.SSIDReference+.Name?" | sed '/^$/d')
|
||||
$ get_hapd_config $itf rsn_override_key_mgmt
|
||||
SAE
|
||||
|
||||
$ get_hapd_config $itf rsn_override_key_mgmt_2
|
||||
Option 'rsn_override_key_mgmt_2' not found
|
||||
|
||||
Restore default config:
|
||||
|
||||
$ R logger -t cram "Restore default config"
|
||||
|
||||
$ R "ba-cli -l \"X_PRPLWARE-COM_WiFiController.Network.AccessPoint.1.SSID=\"prplOS\"\"" | sed '/^$/d'
|
||||
prplOS
|
||||
|
||||
Restore security modes in two steps: WPA3 Transition to 2.4GHz/5GHz and then WPA3 Personal to 6GHz:
|
||||
|
||||
$ R "ba-cli -l \"X_PRPLWARE-COM_WiFiController.Network.AccessPoint.1.Band6G=0\"" | sed '/^$/d'
|
||||
0
|
||||
|
||||
$ R "ba-cli -l \"X_PRPLWARE-COM_WiFiController.Network.AccessPoint.1.Security.ModeEnabled=\"WPA3-Personal-Transition\"\"" | sed '/^$/d'
|
||||
WPA3-Personal-Transition
|
||||
|
||||
$ R "ba-cli \"X_PRPLWARE-COM_WiFiController.Network.AccessPointCommit()\"" | tail -n +2 | sed '/^$/d'
|
||||
X_PRPLWARE-COM_WiFiController.Network.AccessPointCommit() returned
|
||||
[
|
||||
""
|
||||
]
|
||||
|
||||
$ sleep 5
|
||||
|
||||
$ R "ba-cli \"X_PRPLWARE-COM_WiFiController.Network.AccessPoint.1.{Band2_4G=0,Band5GH=0,Band5GL=0,Band6G=1}\"" | sed '/^$/d' | tail -n +3
|
||||
X_PRPLWARE-COM_WiFiController.Network.AccessPoint.1.Band2_4G=0
|
||||
X_PRPLWARE-COM_WiFiController.Network.AccessPoint.1.Band5GH=0
|
||||
X_PRPLWARE-COM_WiFiController.Network.AccessPoint.1.Band5GL=0
|
||||
X_PRPLWARE-COM_WiFiController.Network.AccessPoint.1.Band6G=1
|
||||
|
||||
$ R "ba-cli -l \"X_PRPLWARE-COM_WiFiController.Network.AccessPoint.1.Security.ModeEnabled=\"WPA3-Personal\"\"" | sed '/^$/d'
|
||||
WPA3-Personal
|
||||
|
||||
$ R "ba-cli \"X_PRPLWARE-COM_WiFiController.Network.AccessPointCommit()\"" | tail -n +2 | sed '/^$/d'
|
||||
X_PRPLWARE-COM_WiFiController.Network.AccessPointCommit() returned
|
||||
[
|
||||
""
|
||||
]
|
||||
|
||||
$ sleep 5
|
||||
|
||||
$ R logger -t cram "Stop prplmesh"
|
||||
|
||||
$ R "( /etc/init.d/prplmesh stop ; sleep 2 ) 2>&1 > /dev/null"
|
||||
$ R "sed -i 's/use_dataelements_vap_configs=1/use_dataelements_vap_configs=0/g' /opt/prplmesh/config/beerocks_controller.conf"
|
||||
|
||||
Disable private vaps:
|
||||
|
||||
$ R logger -t cram "Disable private vaps"
|
||||
$ enable_ap_sync 3 0
|
||||
AccessPoint.\d+.Enable=0 (re)
|
||||
|
||||
$ enable_ap_sync 2 0
|
||||
AccessPoint.\d+.Enable=0 (re)
|
||||
|
||||
$ enable_ap_sync 1 0
|
||||
AccessPoint.\d+.Enable=0 (re)
|
||||
|
||||
$ check_ap_ref_ssid 5 Down
|
||||
WiFi.AccessPoint.5 SSID Reference is Down
|
||||
|
||||
$ check_ap_ref_ssid 3 Down
|
||||
WiFi.AccessPoint.3 SSID Reference is Down
|
||||
|
||||
$ check_ap_ref_ssid 1 Down
|
||||
WiFi.AccessPoint.1 SSID Reference is Down
|
||||
|
||||
Restart prplmesh:
|
||||
|
||||
$ R logger -t cram "Restart prplmesh"
|
||||
$ R "( /etc/init.d/prplmesh gateway_mode ; sleep 2 ) > /tmp/prplmesh-gw-mode.log 2>&1 ; logger -t prplmesh-gateway-mode < /tmp/prplmesh-gw-mode.log"
|
||||
$ R "amx_wait_for X_PRPLWARE-COM_WiFiController.Network.Device.1"
|
||||
|
||||
$ R logger -t cram "Test finished!"
|
||||
256
.gitlab/tests/cram/wnc-freedom/113-prplmesh-wpa3-cm.t
Normal file
256
.gitlab/tests/cram/wnc-freedom/113-prplmesh-wpa3-cm.t
Normal file
@ -0,0 +1,256 @@
|
||||
Create R alias:
|
||||
|
||||
$ alias R="${CRAM_REMOTE_COMMAND:-}"
|
||||
$ . "${TESTDIR}/../scripts/wifi.sh"
|
||||
|
||||
$ R logger -t cram "Starting prplMesh WPA3-CM test ..."
|
||||
|
||||
$ R "amx_wait_for Device.WiFi"
|
||||
|
||||
Set AutoChannelEnable=0 on all WiFi.Radio. interfaces:
|
||||
|
||||
$ wifi_dm "Radio.*.AutoChannelEnable=0"
|
||||
WiFi.Radio.1.AutoChannelEnable=0
|
||||
WiFi.Radio.2.AutoChannelEnable=0
|
||||
WiFi.Radio.3.AutoChannelEnable=0
|
||||
|
||||
Set channel to a non DFS one:
|
||||
|
||||
$ wifi_dm "Radio.2.Channel=36"
|
||||
WiFi.Radio.2.Channel=36 (re)
|
||||
|
||||
Check default SecMode:
|
||||
|
||||
$ R logger -t cram "Check default SecMode"
|
||||
|
||||
$ wifi_dm "AccessPoint.1.Security.ModeEnabled?"
|
||||
WiFi.AccessPoint.1.Security.ModeEnabled="WPA2-WPA3-Personal"
|
||||
|
||||
$ wifi_dm "AccessPoint.3.Security.ModeEnabled?"
|
||||
WiFi.AccessPoint.3.Security.ModeEnabled="WPA2-WPA3-Personal"
|
||||
|
||||
$ wifi_dm "AccessPoint.5.Security.ModeEnabled?"
|
||||
WiFi.AccessPoint.5.Security.ModeEnabled="WPA3-Personal"
|
||||
|
||||
Check if private/guest VAPs contain WPA3-Personal-Compatibility in the Security.ModesAvailable list:
|
||||
(use the regex AccessPoint\.[1-6]\+\.Security to filter out backhaul vaps )
|
||||
|
||||
$ wifi_dm "AccessPoint.*.Security.ModesAvailable?" | sed -n 's/^\(WiFi\.AccessPoint\.[1-6]\+\.Security\.ModesAvailable\).*WPA3-Personal-Compatibility.*/\1 has WPA3-Personal-Compatibility mode/p'
|
||||
WiFi.AccessPoint.1.Security.ModesAvailable has WPA3-Personal-Compatibility mode
|
||||
WiFi.AccessPoint.2.Security.ModesAvailable has WPA3-Personal-Compatibility mode
|
||||
WiFi.AccessPoint.3.Security.ModesAvailable has WPA3-Personal-Compatibility mode
|
||||
WiFi.AccessPoint.4.Security.ModesAvailable has WPA3-Personal-Compatibility mode
|
||||
WiFi.AccessPoint.5.Security.ModesAvailable has WPA3-Personal-Compatibility mode
|
||||
WiFi.AccessPoint.6.Security.ModesAvailable has WPA3-Personal-Compatibility mode
|
||||
|
||||
Configure controller for NBAPI configuration:
|
||||
|
||||
$ R logger -t cram "Stop prplmesh"
|
||||
|
||||
$ R "( /etc/init.d/prplmesh 2>&1 > /dev/null stop ; sleep 2 )" 2>&1 > /dev/null
|
||||
$ R "sed -i 's/use_dataelements_vap_configs=0/use_dataelements_vap_configs=1/g' /opt/prplmesh/config/beerocks_controller.conf"
|
||||
$ R logger -t cram "Restart prplmesh"
|
||||
$ R "( /etc/init.d/prplmesh gateway_mode ; sleep 2 ) > /tmp/prplmesh-gw-mode.log 2>&1 ; logger -t prplmesh-gateway-mode < /tmp/prplmesh-gw-mode.log"
|
||||
$ R "amx_wait_for X_PRPLWARE-COM_WiFiController.Network.Device.1"
|
||||
|
||||
$ sleep 10
|
||||
|
||||
Set WPA3-Personal-Compatibility and check that : 1. Controller reads it correctly, 2. triggers reconfiguration, and 3. agent applies the correct value:
|
||||
|
||||
$ wifi_dm "AccessPoint.1.Security.ModeEnabled=\"WPA3-Personal-Compatibility\""
|
||||
WiFi.AccessPoint.1.Security.ModeEnabled="WPA3-Personal-Compatibility"
|
||||
|
||||
$ wifi_dm "AccessPoint.3.Security.ModeEnabled=\"WPA3-Personal-Compatibility\""
|
||||
WiFi.AccessPoint.3.Security.ModeEnabled="WPA3-Personal-Compatibility"
|
||||
|
||||
$ wifi_dm "AccessPoint.5.Security.ModeEnabled=\"WPA3-Personal-Compatibility\""
|
||||
WiFi.AccessPoint.5.Security.ModeEnabled="WPA3-Personal-Compatibility"
|
||||
|
||||
Enable private vaps:
|
||||
|
||||
$ R logger -t cram "Enable private vaps"
|
||||
|
||||
$ enable_ap_sync 1 1
|
||||
AccessPoint.\d+.Enable=1 (re)
|
||||
|
||||
$ enable_ap_sync 3 1
|
||||
AccessPoint.\d+.Enable=1 (re)
|
||||
|
||||
$ enable_ap_sync 5 1
|
||||
AccessPoint.\d+.Enable=1 (re)
|
||||
|
||||
$ check_ap_ref_ssid 1 Up
|
||||
WiFi.AccessPoint.1 SSID Reference is Up
|
||||
|
||||
$ check_ap_ref_ssid 3 Up
|
||||
WiFi.AccessPoint.3 SSID Reference is Up
|
||||
|
||||
$ check_ap_ref_ssid 5 Up
|
||||
WiFi.AccessPoint.5 SSID Reference is Up
|
||||
|
||||
Create one instances of Network.AccessPoint with WPA3-Personal enabled and push it to the agent:
|
||||
|
||||
$ R logger -t cram "Create instances of Network.AccessPoint and push them to the agent"
|
||||
|
||||
$ R "ba-cli \"X_PRPLWARE-COM_WiFiController.Network.AccessPoint+(Band2_4G=1,Band5GH=1,Band5GL=1,Band6G=1,MultiApMode=\"Fronthaul+Backhaul\",SSID=\"SSID_WPA3CM\",Security.ModeEnabled=\"WPA3-Personal\",Security.KeyPassphrase=\"password\",Enable=1)\"" | tail -n +2 | sed '/^$/d'
|
||||
X_PRPLWARE-COM_WiFiController.Network.AccessPoint.* (re)
|
||||
|
||||
$ R "ba-cli \"X_PRPLWARE-COM_WiFiController.Network.AccessPointCommit()\"" | tail -n +2 | sed '/^$/d'
|
||||
X_PRPLWARE-COM_WiFiController.Network.AccessPointCommit() returned
|
||||
[
|
||||
""
|
||||
]
|
||||
|
||||
$ sleep 10
|
||||
|
||||
Check that 3 SSID instances are still operating:
|
||||
|
||||
$ R logger -t cram "Check private vaps"
|
||||
|
||||
$ check_ap_ref_ssid 1 Up
|
||||
WiFi.AccessPoint.1 SSID Reference is Up
|
||||
|
||||
$ check_ap_ref_ssid 3 Up
|
||||
WiFi.AccessPoint.3 SSID Reference is Up
|
||||
|
||||
$ check_ap_ref_ssid 5 Up
|
||||
WiFi.AccessPoint.5 SSID Reference is Up
|
||||
|
||||
Check config from Nbapi AccessPoint is correctly applied : SSID / Security.ModeEnabled:
|
||||
|
||||
$ wifi_dm "AccessPoint.1.SSIDReference+.SSID?"
|
||||
Device.WiFi.SSID.\d+.SSID="SSID_WPA3CM" (re)
|
||||
|
||||
$ wifi_dm "AccessPoint.3.SSIDReference+.SSID?"
|
||||
Device.WiFi.SSID.\d+.SSID="SSID_WPA3CM" (re)
|
||||
|
||||
$ wifi_dm "AccessPoint.5.SSIDReference+.SSID?"
|
||||
Device.WiFi.SSID.\d+.SSID="SSID_WPA3CM" (re)
|
||||
|
||||
Check if agent overrides the security mode:
|
||||
|
||||
$ wifi_dm "AccessPoint.1.Security.ModeEnabled?"
|
||||
WiFi.AccessPoint.1.Security.ModeEnabled="WPA3-Personal"
|
||||
|
||||
$ wifi_dm "AccessPoint.3.Security.ModeEnabled?"
|
||||
WiFi.AccessPoint.3.Security.ModeEnabled="WPA3-Personal"
|
||||
|
||||
$ wifi_dm "AccessPoint.5.Security.ModeEnabled?"
|
||||
WiFi.AccessPoint.5.Security.ModeEnabled="WPA3-Personal"
|
||||
|
||||
Push WPA3-Personal-Compatibility:
|
||||
|
||||
$ R logger -t cram "Push WPA3-Personal-Compatibility"
|
||||
|
||||
$ R "ba-cli -l X_PRPLWARE-COM_WiFiController.Network.AccessPoint.1.Security.ModeEnabled=\"WPA3-Personal-Compatibility\"" | sed '/^$/d'
|
||||
WPA3-Personal-Compatibility
|
||||
|
||||
$ R "ba-cli \"X_PRPLWARE-COM_WiFiController.Network.AccessPointCommit()\"" | tail -n +2 | sed '/^$/d'
|
||||
X_PRPLWARE-COM_WiFiController.Network.AccessPointCommit() returned
|
||||
[
|
||||
""
|
||||
]
|
||||
|
||||
$ sleep 5
|
||||
|
||||
Check if agent overrides the security mode:
|
||||
|
||||
$ wifi_dm "AccessPoint.1.Security.ModeEnabled?"
|
||||
WiFi.AccessPoint.1.Security.ModeEnabled="WPA3-Personal-Compatibility"
|
||||
|
||||
$ wifi_dm "AccessPoint.3.Security.ModeEnabled?"
|
||||
WiFi.AccessPoint.3.Security.ModeEnabled="WPA3-Personal-Compatibility"
|
||||
|
||||
$ wifi_dm "AccessPoint.5.Security.ModeEnabled?"
|
||||
WiFi.AccessPoint.5.Security.ModeEnabled="WPA3-Personal-Compatibility"
|
||||
|
||||
Check hostapd configuration file:
|
||||
(RSN Override 1 is set, RSN Override 2 shouldn't be present)
|
||||
|
||||
$ itf=$(R "ba-cli -l WiFi.AccessPoint.1.SSIDReference+.Name?" | sed '/^$/d')
|
||||
$ get_hapd_config $itf rsn_override_key_mgmt
|
||||
SAE
|
||||
|
||||
$ get_hapd_config $itf rsn_override_key_mgmt_2
|
||||
Option 'rsn_override_key_mgmt_2' not found
|
||||
|
||||
$ itf=$(R "ba-cli -l WiFi.AccessPoint.3.SSIDReference+.Name?" | sed '/^$/d')
|
||||
$ get_hapd_config $itf rsn_override_key_mgmt
|
||||
SAE
|
||||
|
||||
$ get_hapd_config $itf rsn_override_key_mgmt_2
|
||||
Option 'rsn_override_key_mgmt_2' not found
|
||||
|
||||
Restore default config:
|
||||
|
||||
$ R logger -t cram "Restore default config"
|
||||
|
||||
$ R "ba-cli -l \"X_PRPLWARE-COM_WiFiController.Network.AccessPoint.1.SSID=\"prplOS\"\"" | sed '/^$/d'
|
||||
prplOS
|
||||
|
||||
Restore security modes in two steps: WPA3 Transition to 2.4GHz/5GHz and then WPA3 Personal to 6GHz:
|
||||
|
||||
$ R "ba-cli -l \"X_PRPLWARE-COM_WiFiController.Network.AccessPoint.1.Band6G=0\"" | sed '/^$/d'
|
||||
0
|
||||
|
||||
$ R "ba-cli -l \"X_PRPLWARE-COM_WiFiController.Network.AccessPoint.1.Security.ModeEnabled=\"WPA3-Personal-Transition\"\"" | sed '/^$/d'
|
||||
WPA3-Personal-Transition
|
||||
|
||||
$ R "ba-cli \"X_PRPLWARE-COM_WiFiController.Network.AccessPointCommit()\"" | tail -n +2 | sed '/^$/d'
|
||||
X_PRPLWARE-COM_WiFiController.Network.AccessPointCommit() returned
|
||||
[
|
||||
""
|
||||
]
|
||||
|
||||
$ sleep 5
|
||||
|
||||
$ R "ba-cli \"X_PRPLWARE-COM_WiFiController.Network.AccessPoint.1.{Band2_4G=0,Band5GH=0,Band5GL=0,Band6G=1}\"" | sed '/^$/d' | tail -n +3
|
||||
X_PRPLWARE-COM_WiFiController.Network.AccessPoint.1.Band2_4G=0
|
||||
X_PRPLWARE-COM_WiFiController.Network.AccessPoint.1.Band5GH=0
|
||||
X_PRPLWARE-COM_WiFiController.Network.AccessPoint.1.Band5GL=0
|
||||
X_PRPLWARE-COM_WiFiController.Network.AccessPoint.1.Band6G=1
|
||||
|
||||
$ R "ba-cli -l \"X_PRPLWARE-COM_WiFiController.Network.AccessPoint.1.Security.ModeEnabled=\"WPA3-Personal\"\"" | sed '/^$/d'
|
||||
WPA3-Personal
|
||||
|
||||
$ R "ba-cli \"X_PRPLWARE-COM_WiFiController.Network.AccessPointCommit()\"" | tail -n +2 | sed '/^$/d'
|
||||
X_PRPLWARE-COM_WiFiController.Network.AccessPointCommit() returned
|
||||
[
|
||||
""
|
||||
]
|
||||
|
||||
$ sleep 5
|
||||
|
||||
$ R logger -t cram "Stop prplmesh"
|
||||
|
||||
$ R "( /etc/init.d/prplmesh stop ; sleep 2 ) 2>&1 > /dev/null"
|
||||
$ R "sed -i 's/use_dataelements_vap_configs=1/use_dataelements_vap_configs=0/g' /opt/prplmesh/config/beerocks_controller.conf"
|
||||
|
||||
Disable private vaps:
|
||||
|
||||
$ R logger -t cram "Disable private vaps"
|
||||
$ enable_ap_sync 5 0
|
||||
AccessPoint.\d+.Enable=0 (re)
|
||||
|
||||
$ enable_ap_sync 3 0
|
||||
AccessPoint.\d+.Enable=0 (re)
|
||||
|
||||
$ enable_ap_sync 1 0
|
||||
AccessPoint.\d+.Enable=0 (re)
|
||||
|
||||
$ check_ap_ref_ssid 5 Down
|
||||
WiFi.AccessPoint.5 SSID Reference is Down
|
||||
|
||||
$ check_ap_ref_ssid 3 Down
|
||||
WiFi.AccessPoint.3 SSID Reference is Down
|
||||
|
||||
$ check_ap_ref_ssid 1 Down
|
||||
WiFi.AccessPoint.1 SSID Reference is Down
|
||||
|
||||
Restart prplmesh:
|
||||
|
||||
$ R logger -t cram "Restart prplmesh"
|
||||
$ R "( /etc/init.d/prplmesh gateway_mode ; sleep 2 ) > /tmp/prplmesh-gw-mode.log 2>&1 ; logger -t prplmesh-gateway-mode < /tmp/prplmesh-gw-mode.log"
|
||||
$ R "amx_wait_for X_PRPLWARE-COM_WiFiController.Network.Device.1"
|
||||
|
||||
$ R logger -t cram "Test finished!"
|
||||
Loading…
Reference in New Issue
Block a user