maple/prplos
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
64,515 Commits 1 Branch 0 Tags 238 MiB
C 55.7%
Makefile 17.6%
Perl 7.8%
Shell 6.9%
Roff 6.1%
Other 5.7%
213e6be457
Go to file
Tim Hsu 213e6be457 profiles: prpl: qca_ipq95xx: fix EFR32MG, LEDs, pstore and build/packages 
* remove unused omci, omci-base, and trex-drv packages to resolve build errors
	The image build process generated error messages for three unused packages: omci, omci-base, and trex-drv. Removed these packages to prevent unnecessary build errors.

* remove dependencies on nonexistent packages
	This commit addresses build warnings caused by references to nonexistent packages in several Makefiles During the build process, multiple warnings were reported indicating dependencies on packages such as kmod-crypto-ocf, kmod-qca-wifi, kmod-qca-nss-crypto, kmod-qca-mcs, kmod-qca-hyfi-bridge, qca-nss-fw-eip-al, and kmod-qca-rfs , which do not exist in the current build environment.
	Removed dependencies on missing packages in the affected Makefiles to resolve these warnings. This fix was originally made by Nikhil Gurram in branch dev_ath13.0-ipq95xx.

* Enable CONFIG_PSTORE_RAM
	kernelfaults module will retrieve panics and oops form pstore. 64 KiB reserved for ramoops/pstore

* add support for EFR32MG
	Enable UART and I/O expander to support ATH13.0 for EFR32MG on the Freedom board.

* add support for LED driver
	The I2C multiplexer TCA9548A is connected to the I2C3 bus. The I/O expander TCA6416A is connected to channel 5 of the I2C multiplexer TCA9548A and is controlled by GPIO17/18 for interrupt and reset. The LED driver LP5562 is connected to the I2C3 bus and enabled by GPIO13 of the I/O expander TCA6416A. The LED driver LP5562 controls one RGB LED and one white LED. Set up the system indicator lights.

Fixes: PCF-1968 PCF-1977 PCF-2028 PCF-2027 PCF-2059
Signed-off-by: Tim Hsu <tim.hsu@wnc.com.tw>
Signed-off-by: Petr Štetiar <petr.stetiar@prplfoundation.org> [rebase]
2025-10-09 20:03:34 +02:00
.devcontainer/ci-env
.github CI: labeler: Add stm32 target 2024-11-28 18:49:21 +00:00
.gitlab time: 070-time.t: add test for POSIX validation 2025-10-09 18:28:54 +02:00
.testbed ci: cdrouter: prplWare-Smoke-Test-Suite: add 7 new UPnP tests 2025-10-08 20:18:55 +00:00
.vscode meta: VS Code: add "Git: Always Sign Off" setting 2024-10-03 17:18:51 +02:00
config build: add support for checksec.sh based mitigation reports 2025-07-31 15:20:37 +00:00
include Buildsystem: Invalidate OpenWrt package information when some of SCAN_DEPS deleted 2025-09-15 13:46:17 +03:00
LICENSES
package kmod-ipt-ipopt: add conditional dependency on kmod-nf-conntrack 2025-08-01 08:23:54 +00:00
profiles profiles: prpl: qca_ipq95xx: fix EFR32MG, LEDs, pstore and build/packages 2025-10-09 20:03:34 +02:00
scripts scripts: gen_config: new features to remove package and include profiles 2025-10-06 11:56:09 +03:00
target kernel: move kernel-6.6 file to linux/generic directory 2025-07-31 15:27:59 +00:00
toolchain toolchain: glibc: Update glibc 2.38 to recent HEAD 2025-07-27 19:47:26 +02:00
tools tools: checksec.sh: fix build breakage caused by wrong PKG_MIRROR_HASH 2025-07-31 15:30:00 +00:00
.gitattributes
.gitignore gitignore: ignore local APK keys 2024-05-17 22:03:06 +03:00
.gitlab-ci.yml profiles: prpl: add Extender profiles 2025-10-06 12:19:35 +02:00
BSDmakefile
Config.in
COPYING
feeds.conf.default feeds.conf.default: pin to latest openwrt-24.10 branch states 2025-07-31 15:29:59 +00:00
Makefile build,base-files: propagate prplOS version into build artifacts 2025-07-31 15:18:10 +00:00
README.md README: replace "MacOSX" with "macOS" 2024-04-01 18:46:30 +02:00
rules.mk build: add comments to makefiles 2024-11-28 18:47:03 +00:00

README.md

OpenWrt logo

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

Sunshine!

Download

Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.

If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.

An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:

Development

To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.7+ rsync subversion unzip which

Quickstart

  1. Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default

  2. Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/

  3. Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.

  4. Run make to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.

Related Repositories

The main repository uses multiple sub-repositories to manage packages of different categories. All packages are installed via the OpenWrt package manager called opkg. If you're looking to develop the web interface or port packages to OpenWrt, please find the fitting repository below.

  • LuCI Web Interface: Modern and modular interface to control the device via a web browser.

  • OpenWrt Packages: Community repository of ported packages.

  • OpenWrt Routing: Packages specifically focused on (mesh) routing.

  • OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).

Support Information

For a list of supported devices see the OpenWrt Hardware Database

Documentation

Support Community

  • Forum: For usage, projects, discussions and hardware advise.
  • Support Chat: Channel #openwrt on oftc.net.

Developer Community

License

OpenWrt is licensed under GPL-2.0