3ce4590aa6
Integrates following changes:
- pwhm: chanMgt: fix potential memory lost. (e8e5f1d6)
- pwhm: chanmgt: fix too many logs (daea5d89)
- pwhm: chanmgt: allow direct retry to set pending target chanspec (b2c2593b)
- pwhm: nl80211: avoid large stack memory alloc (d85f0308)
- pwhm: nl80211: fix memory leak (8e117e54)
- pwhm: rad_scan : fix high cpu load when sorting dm scan results (ce4b0b6c)
- pwhm: fsm : fix stations are not properly disconnected when hostapd is stopped (9a06bc3f)
- pwhm: odl : remove default enabling of AP KickRoamingStation feature (722fd49f)
- pwhm: unit test : fix UT local run (87ded5a2)
- pwhm: assocdev: fix error prints on assoc / disassoc (89a64175)
- pwhm: assocDev:Issue: fix associatedDevice entry is not always created (8192a418)
- pwhm: assocDev: add WdsInterfaceName param for 4mac associated devices (9624a250)
- pwhm: assocDev: fix wds device not seen connected (a8179aeb)
- pwhm: nl80211: fix Noise not reported (3bfe9cfe)
- pwhm: zwdfs: fix WiFi process is hanging when ZWDFS is launched (58b81d69)
- pwhm: fsm: fix wrong MldMAC set with disabled linkMAC (c6d1055a)
- pwhm: secDmnGrp: fix hostapd startup failure loop when disabling vap (c2562e4d)
- pwhm: mld: fix wrong link for of MLO sta disassoc frame (7142b923)
- pwhm: hostapd: fix repeater not disconnected when toggling the gwy AP radio (18b6fd02)
- pwhm: util: fix build failure target-x86_64_glibc (68edcef1)
- pwhm: hostapd: fix checking the BSSID validity (8e5394f7)
- pwhm: wps: fix errors at boot of failing to stop wps session (9f4f4994)
- pwhm: hostapd: fix invalid radio status (a659233b)
- pwhm: secDmnGrp: fix hostapd not started although vap is enabled (979ac3bd)
- pwhm: apMld: fix AffSta link reported disabled while in SLO mode (93e494b3)
- pwhm: hostapd: fix hostapd restart after mlo reconfig (781d0910)
- pwhm: rad: fix radio active criterias (85e807cc)
- pwhm: fsm: fix VAP status remains down (16031129)
- pwhm: rad: prevent crash hapd UPDATE when enabling MLD link (16742a50)
- pwhm: hostapd: avoid force hapd UPDATE while starting (013146e9)
- pwhm: mld: fix AP MLD link status not updated (b32decfa)
- pwhm: nl80211: fix failure getting wiphy info using netdev index (86d80374)
- pwhm: nl80211: fix Per-link station signal strength value is not available (74e2b61e)
- pwhm: nl80211: fix steered devices to wifi 5ghz still appear associated with the 2.4 GHz (5ab81725)
- pwhm: nl80211: fix approximate per-link affSta nl80211 stats (6a74e8be)
- pwhm: nl80211: fix reading link bandwidth 320MHz (8e430692)
- pwhm: nl80211: fix assumption on missing main staLinkId (a804f112)
- pwhm: debug: print hostapd link status for debug (9a76ab79)
- pwhm: daemon: fix memory leak in PWHM (1732d5b0)
- pwhm: daemon: fix pwhm crash when starting hostapd (90fbbc06)
- pwhm: ssid: fix guest WiFi disabled but still shows traffic in WebUI (26fb6913)
- pwhm: ap: fix repeater is not deauthenticated properly (0006afad)
- pwhm: rad: fix radio status no up to date (aca43bd0)
- pwhm: ssid: fix wireless clients are unable to connect to the 2.4GHz and 5GHz bands in HGW (66ad6f73)
- pwhm: hostapd: fix APMLD SLO link status remains down (5f16b368)
- pwhm: zwdfs: fix failure to preclear dfs channels (f9d9beca)
- pwhm: bgdfs: fix bgdfs start error loop (d2740748)
- pwhm: rad: handle update radio status transaction failures (82c81c1f)
- pwhm: hostapd: reduce excessive deauthentication frames during hostapd reload (3078b72f)
- pwhm: ifStats: fix missed wds vlans traffic counters (8efaab08)
- pwhm: assocDev: only get known station stats for rssiMonitoring (9984d840)
- pwhm: assocDev: reduce station info refresh cpuload (c0345960)
- pwhm: mld: fix mlo links stats (fcb34c2d)
- pwhm: debug: fix error logs flooding when refreshing disabled vaps status (9e8c1593)
- pwhm: nl80211: fix getting mlo prim link ifIndex (5823561e)
- pwhm: mld: fix prim APMLD link vap5g0priv remains down after toggle (06c19532)
- pwhm: rad: fix pwhm random crash on restart. (3ad9a403)
- pwhm: nl80211: fix scan issues (23322dff)
- pwhm: hapd: fix hostapd taking too long time to stop (d261f437)
- pwhm: rssiMon: fix of memory leak (b1bbc0c4)
- pwhm: ap: fix ap MAC Filtered address list loses entries (8a811179)
- pwhm: ap: fix temp apMacFiltering (12a4a663)
- pwhm: hostapd: fix Operating Class in 802.11k Beacon Request frames (f574d511)
- pwhm: hostapd: fix WPS Pairing not working after SSID broadcast is re-enabled (fbc9944c)
- pwhm: mld: fix wrong radio stats when only having Auxiliary mld links (d147a5f2)
- pwhm: hostapd: prevent hidden SSIDs from being added to Reduced Neighbor Report (RNR) (afdbca0f)
- pwhm: hostapd: fix dual associated station is early kicked while transiting (61bf07eb)
- pwhm: debug: print hostapd STATUS-DRIVER for debug (9e201112)
- pwhm: mld: fix MLD VAPs Status/Enable inconsistency problem after reset (cf941a9d)
- pwhm: mld: avoid exec lossly actions when restarting hostapd (b268f418)
- ci: baf: update autogenerated files (9933c695)
- pwhm: hostapd: fix dual associated station is early kicked while transiting (eb023063)
- pwhm: security config: add WPA3 Compatibility Mode (c4f7c2d1)
- pwhm: wld_util: add util apis to locate binExec fullpath of shell command (e8dfab64)
- pwhm: wld_util: add utils api to fetch string keywords support in wpactl dmn binary (384c157a)
- pwhm: capabilities detection: add wrapper api to detect secDmn cfgParam support in the daemon execBinary (8401b1b6)
- pwhm: capabilities detection: auto detect mrsno support in genPlugin (92e86b38)
- pwhm: security config: add cfg of rsnxe and rsnxoe according to WPA3-CM spec (76e63528)
- APMLD: Auto-create APMLD instances when an SSID is assigned to an MLD (260fb841)
- APMLD: Defined DM parameters under APMLD object (355fdaf4)
- APMLD: Added support for updating the DM parameters under AffiliatedAP.{i} instances under each APMLD. (c64b2018)
- APMLD: Added DM support for displaying the MLO Stats for each affiliated APs under an APMLD (070248f3)
- APMLD: Added DM support for APMLDConfig object and the parameters under that (51e5890b)
- APMLD: Remove MLDConfig and MLOStats from AP object (f1321ce5)
- APLMD: Created Unit Test for APMLD ojects (adb5e37a)
- pWHM: Static puncturing (30eb29f3)
- libswlc: security config: Add WPA3 Compability Mode (a6af5812)
- libswlc: fileUtils: Add helper function to find file (6a4cbda6)
- c6a0149b: ("pwhm: hapd: partial revert: keep unused ifaces when re/starting hostapd", 2025-11-18)
- 6d8f0e69: ("pwhm: wpaCtrl: fix confusion about wpactrl link socket used for different iface", 2025-11-17)
References: PPM-3352, PPM-3347, PPM-3350, PPM-3604
Signed-off-by: prplbot <bot@prplfoundation.org>
|
||
|---|---|---|
| .devcontainer/ci-env | ||
| .github | ||
| .gitlab | ||
| .testbed | ||
| .vscode | ||
| config | ||
| include | ||
| LICENSES | ||
| package | ||
| profiles | ||
| scripts | ||
| target | ||
| toolchain | ||
| tools | ||
| .gitattributes | ||
| .gitignore | ||
| .gitlab-ci.yml | ||
| BSDmakefile | ||
| Config.in | ||
| COPYING | ||
| feeds.conf.default | ||
| Makefile | ||
| README.md | ||
| rules.mk | ||
OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Sunshine!
Download
Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.
If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.
An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:
Development
To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.
Requirements
You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.
binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.7+ rsync subversion unzip which
Quickstart
-
Run
./scripts/feeds update -ato obtain all the latest package definitions defined in feeds.conf / feeds.conf.default -
Run
./scripts/feeds install -ato install symlinks for all obtained packages into package/feeds/ -
Run
make menuconfigto select your preferred configuration for the toolchain, target system & firmware packages. -
Run
maketo build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.
Related Repositories
The main repository uses multiple sub-repositories to manage packages of
different categories. All packages are installed via the OpenWrt package
manager called opkg. If you're looking to develop the web interface or port
packages to OpenWrt, please find the fitting repository below.
-
LuCI Web Interface: Modern and modular interface to control the device via a web browser.
-
OpenWrt Packages: Community repository of ported packages.
-
OpenWrt Routing: Packages specifically focused on (mesh) routing.
-
OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).
Support Information
For a list of supported devices see the OpenWrt Hardware Database
Documentation
Support Community
- Forum: For usage, projects, discussions and hardware advise.
- Support Chat: Channel
#openwrton oftc.net.
Developer Community
- Bug Reports: Report bugs in OpenWrt
- Dev Mailing List: Send patches
- Dev Chat: Channel
#openwrt-develon oftc.net.
License
OpenWrt is licensed under GPL-2.0