36a48ba4c0
Restore the MLDUnit relative to BH interfaces to ensure the test environment is properly cleaned up after execution. Not restoring the BHs MLDUnit may affect the behavior of the following tests. References: PPM-3928 Signed-off-by: Houssem Dafdouf <houssem.dafdouf_ext@softathome.com>
231 lines
6.9 KiB
Perl
231 lines
6.9 KiB
Perl
Create R alias:
|
|
|
|
$ alias R="${CRAM_REMOTE_COMMAND:-}"
|
|
$ . "${TESTDIR}/../scripts/wifi.sh"
|
|
|
|
$ R logger -t cram "Starting PWHM WPA3-CM test ..."
|
|
|
|
Wait for PWHM and add timeout for it to connect to mapper:
|
|
$ R "amx_wait_for WiFi.Radio."
|
|
$ sleep 5
|
|
|
|
Set AutoChannelEnable=0 on all Device.WiFi.Radio. interfaces:
|
|
|
|
$ R "ba-cli -j -l WiFi.Radio.*.AutoChannelEnable=0 | sed '/^$/d'"
|
|
[{"WiFi.Radio.1.":{"AutoChannelEnable":0},"WiFi.Radio.2.":{"AutoChannelEnable":0},"WiFi.Radio.3.":{"AutoChannelEnable":0}}]
|
|
|
|
Set channel to a non DFS one:
|
|
|
|
$ R "usp-cli -j -l Device.WiFi.Radio.2.Channel=36 | sed '/^$/d'"
|
|
[{"Device.WiFi.Radio.2.":{"Channel":36}}]
|
|
|
|
$ sleep 5
|
|
|
|
Stop prplmesh:
|
|
|
|
$ R logger -t cram "Stop prplmesh"
|
|
|
|
$ R "ba-cli -l X_PRPLWARE-COM_ProcessManager.PrplMesh.Enable=0" | tr -d '\n'
|
|
0 (no-eol)
|
|
|
|
$ sleep 2
|
|
|
|
Silently disable MLO:
|
|
|
|
$ R logger -t cram "Disable MLO"
|
|
$ R "usp-cli Device.WiFi.SSID.*.MLDUnit=-1 > /dev/null"
|
|
|
|
Check all 9 VAPs contain WPA3-Personal-Compatibility in the Security.ModesAvailable list:
|
|
|
|
$ R "usp-cli Device.WiFi.AccessPoint.*.Security.X_PRPLWARE-COM_ModesAvailable? | grep WPA3-Personal-Compatibility | wc -l"
|
|
9
|
|
|
|
Enable private vaps:
|
|
|
|
$ R logger -t cram "Enable private vaps"
|
|
$ enable_ap 1
|
|
Device.WiFi.AccessPoint.1 enabled
|
|
|
|
$ enable_ap 3
|
|
Device.WiFi.AccessPoint.3 enabled
|
|
|
|
$ enable_ap 5
|
|
Device.WiFi.AccessPoint.5 enabled
|
|
|
|
$ sleep 10
|
|
|
|
Check that 3 SSID instances are operating:
|
|
|
|
$ check_ap_ref_ssid 1 Up
|
|
Device.WiFi.AccessPoint.1 SSID Reference is Up
|
|
|
|
$ check_ap_ref_ssid 3 Up
|
|
Device.WiFi.AccessPoint.3 SSID Reference is Up
|
|
|
|
$ check_ap_ref_ssid 5 Up
|
|
Device.WiFi.AccessPoint.5 SSID Reference is Up
|
|
|
|
Check wpa_key_mgmt is configured for WPA3-Transition in 5GHz hostapd.conf and rsn override params are absent:
|
|
|
|
$ itf=$(R "usp-cli -l Device.WiFi.AccessPoint.3.SSIDReference+.Name?" | sed '/^$/d')
|
|
$ get_hapd_config $itf wpa_key_mgmt
|
|
WPA-PSK SAE
|
|
|
|
$ get_hapd_config $itf rsn_override_key_mgmt
|
|
Option 'rsn_override_key_mgmt' not found
|
|
|
|
Check wpa_key_mgmt is configured for WPA3 in 6GHz hostapd.conf and rsn override params are absent:
|
|
|
|
$ itf=$(R "usp-cli -l Device.WiFi.AccessPoint.5.SSIDReference+.Name?" | sed '/^$/d')
|
|
$ get_hapd_config $itf wpa_key_mgmt
|
|
.*\bSAE\b.* (re)
|
|
|
|
$ get_hapd_config $itf rsn_override_key_mgmt
|
|
Option 'rsn_override_key_mgmt' not found
|
|
|
|
Set WPA3-Personal-Compatibility and search for one rsn override parameter in hostapd.conf
|
|
The functional test here is: Controller is able to read WPA3-Personal-Compatibility from pwhm; Agent receives WPA3-Personal-Compatibility from Controller:
|
|
|
|
$ R logger -t cram "Set WPA3-Personal-Compatibility"
|
|
$ R "usp-cli -l -j \"Device.WiFi.AccessPoint.[Enable == 1].Security.ModeEnabled='WPA3-Personal-Compatibility'\" | jsonfilter -e @[0]'[*].ModeEnabled'"
|
|
WPA3-Personal-Compatibility
|
|
WPA3-Personal-Compatibility
|
|
WPA3-Personal-Compatibility
|
|
|
|
$ sleep 10
|
|
|
|
Agent did not overwrite the AccessPoint.Security.ModeEnabled in pwhm:
|
|
|
|
$ R "usp-cli -j -l Device.WiFi.AccessPoint.[Enable==1].Security.ModeEnabled? | jsonfilter -e @[0]'[@].ModeEnabled'"
|
|
WPA3-Personal-Compatibility
|
|
WPA3-Personal-Compatibility
|
|
WPA3-Personal-Compatibility
|
|
|
|
We only test 2.4/5GHz for RSN Override 1 parameters; RSN Override 1 is not broadcasted by 6GHz:
|
|
|
|
$ itf=$(R "usp-cli -l Device.WiFi.AccessPoint.1.SSIDReference+.Name?" | sed '/^$/d')
|
|
$ get_hapd_config $itf rsn_override_key_mgmt
|
|
SAE
|
|
|
|
$ itf=$(R "usp-cli -l Device.WiFi.AccessPoint.3.SSIDReference+.Name?" | sed '/^$/d')
|
|
$ get_hapd_config $itf rsn_override_key_mgmt
|
|
SAE
|
|
|
|
Check RSN Override 2 parameters are absent in hostapd.conf (we disabled MLO and implicitly 11BE):
|
|
|
|
$ itf=$(R "usp-cli -l Device.WiFi.AccessPoint.1.SSIDReference+.Name?" | sed '/^$/d')
|
|
$ get_hapd_config $itf rsn_override_key_mgmt_2
|
|
Option 'rsn_override_key_mgmt_2' not found
|
|
|
|
$ itf=$(R "usp-cli -l Device.WiFi.AccessPoint.3.SSIDReference+.Name?" | sed '/^$/d')
|
|
$ get_hapd_config $itf rsn_override_key_mgmt_2
|
|
Option 'rsn_override_key_mgmt_2' not found
|
|
|
|
Restore MLDUnit to default values
|
|
|
|
$ R logger -t cram "Restore default MLD configuration"
|
|
|
|
$ set_mlduint 1 0
|
|
0
|
|
|
|
$ set_mlduint 2 1
|
|
1
|
|
|
|
$ set_mlduint 3 0
|
|
0
|
|
|
|
$ set_mlduint 4 1
|
|
1
|
|
|
|
$ set_mlduint 5 0
|
|
0
|
|
|
|
$ set_mlduint 6 1
|
|
1
|
|
|
|
$ set_mlduint 7 2
|
|
2
|
|
|
|
$ set_mlduint 8 2
|
|
2
|
|
|
|
$ set_mlduint 9 2
|
|
2
|
|
|
|
$ sleep 10
|
|
|
|
Check RSNO2 parameter was added to 5GHz hostapd conf file:
|
|
|
|
$ itf=$(R "usp-cli -l Device.WiFi.AccessPoint.3.SSIDReference+.Name?" | sed '/^$/d')
|
|
$ get_hapd_config $itf rsn_override_key_mgmt_2
|
|
.*\S.* (re)
|
|
|
|
Check RSNO2 parameter was added to 6GHz hostapd conf file
|
|
|
|
$ itf=$(R "usp-cli -l Device.WiFi.AccessPoint.5.SSIDReference+.Name?" | sed '/^$/d')
|
|
$ get_hapd_config $itf rsn_override_key_mgmt_2
|
|
.*\S.* (re)
|
|
|
|
Next, restore security modes in two steps: WPA3 Transition to 2.4GHz/5GHz, and WPA3 Personal to 6GHz
|
|
|
|
$ R "usp-cli -j -l Device.WiFi.AccessPoint.1.Security.ModeEnabled='WPA3-Personal-Transition' | jsonfilter -e @[0]'[@].ModeEnabled'"
|
|
WPA3-Personal-Transition
|
|
|
|
$ R "usp-cli -j -l Device.WiFi.AccessPoint.3.Security.ModeEnabled='WPA3-Personal-Transition' | jsonfilter -e @[0]'[@].ModeEnabled'"
|
|
WPA3-Personal-Transition
|
|
|
|
$ R "usp-cli -j -l Device.WiFi.AccessPoint.5.Security.ModeEnabled='WPA3-Personal' | jsonfilter -e @[0]'[@].ModeEnabled'"
|
|
WPA3-Personal
|
|
|
|
$ sleep 10
|
|
|
|
Here the expected configuration is: One VAP Enabled on 2.4 / 5 GHz / 6GHz bands // Security.ModeEnabled=WPA3-Personal-Transition or WPA3-Personal
|
|
|
|
Check 5GHz is broadcasting WPA3 Transition // at least WPA-PSK SAE // ignore 11BE/ AKM24
|
|
|
|
$ itf=$(R "usp-cli -l Device.WiFi.AccessPoint.3.SSIDReference+.Name?" | sed '/^$/d')
|
|
$ get_hapd_config $itf wpa_key_mgmt
|
|
(?=.*WPA-PSK)(?=.*SAE).* (re)
|
|
|
|
Check 2.4GHz is broadcasting WPA3 Transition // at least WPA-PSK SAE // ignore 11BE/ AKM24
|
|
|
|
$ itf=$(R "usp-cli -l Device.WiFi.AccessPoint.1.SSIDReference+.Name?" | sed '/^$/d')
|
|
$ get_hapd_config $itf wpa_key_mgmt
|
|
(?=.*WPA-PSK)(?=.*SAE).* (re)
|
|
|
|
Check 6GHz is broadcasting WPA3 // at least SAE // ignore 11BE/ AKM24:
|
|
|
|
$ itf=$(R "usp-cli -l Device.WiFi.AccessPoint.5.SSIDReference+.Name?" | sed '/^$/d')
|
|
$ get_hapd_config $itf wpa_key_mgmt
|
|
.*\bSAE\b.* (re)
|
|
|
|
No more RSN Override in hostapd config files:
|
|
|
|
$ R "cat /tmp/wlan*_hapd.conf | grep rsn_override | wc -l"
|
|
0
|
|
|
|
Silently Disable all VAPs:
|
|
|
|
$ R "usp-cli Device.WiFi.AccessPoint.*.Enable=0 > /dev/null"
|
|
|
|
Wait VAP disabled completely:
|
|
|
|
$ sleep 15
|
|
|
|
Restore default controller config:
|
|
|
|
$ R logger -t cram "Restart prplmesh"
|
|
|
|
$ R "ba-cli X_PRPLWARE-COM_ProcessManager.PrplMesh.ManagementMode=Multi-AP-Controller-and-Agent" > /dev/null
|
|
$ R "ba-cli -l X_PRPLWARE-COM_ProcessManager.PrplMesh.Enable=1" | tr -d '\n'
|
|
1 (no-eol)
|
|
|
|
$ R "ubus -t 60 wait_for X_PRPLWARE-COM_WiFiController.Network.Device.1"
|
|
|
|
Check that prplmesh is running:
|
|
|
|
$ R "ba-cli -l X_PRPLWARE-COM_ProcessManager.PrplMesh.Status?" | tr -d '\n'
|
|
Active (no-eol)
|
|
|
|
$ R logger -t cram "Finishing PWHM WPA3-CM test ..."
|