e899dc0a33
cdrouter_firewall_508: Verify outbound packets are not forwarded if the
source address is not a prefix of the interior network
This test ensures that the random martian address assigned to the LAN
client in step 2 is outside of lanIp/lanMask, does not match any static
routes configured with staticRouteLanNetwork and is not within any of
the following reserved IP ranges: 0.0.0.0/8,
127.0.0.0/8, 169.254.0.0/16, 192.88.99.0/24, 224.0.0.0/4,
240.0.0.0/4, 255.255.255.255/32.
Make the test pass by setting `rp_filter` to strict mode. Strict mode as
defined in RFC3704 Strict Reverse Path Each incoming packet is tested
against the FIB and if the interface is not the best reverse path the
packet check will fail. By default failed packets are discarded.
Current recommended practice in RFC3704 is to enable strict mode to
prevent IP spoofing from DDos attacks. If using asymmetric routing or
other complicated routing, then loose mode is recommended.
References: PCF-548
References: https://tools.ietf.org/html/rfc3704
References: https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit b9ad7cbf75a4a99b22ef0906d8a76d7b71a8df97)
(cherry picked from commit 4a593e72e3b4751074311f1d1f3607b13d5d9128)
|
||
|---|---|---|
| .devcontainer/ci-env | ||
| .github | ||
| .gitlab | ||
| .testbed | ||
| .vscode | ||
| config | ||
| include | ||
| LICENSES | ||
| package | ||
| profiles | ||
| scripts | ||
| target | ||
| toolchain | ||
| tools | ||
| .gitattributes | ||
| .gitignore | ||
| .gitlab-ci.yml | ||
| BSDmakefile | ||
| Config.in | ||
| COPYING | ||
| feeds.conf.default | ||
| Makefile | ||
| README.md | ||
| rules.mk | ||
OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Sunshine!
Download
Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.
If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.
An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:
Development
To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.
Requirements
You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.
binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.7+ rsync subversion unzip which
Quickstart
-
Run
./scripts/feeds update -ato obtain all the latest package definitions defined in feeds.conf / feeds.conf.default -
Run
./scripts/feeds install -ato install symlinks for all obtained packages into package/feeds/ -
Run
make menuconfigto select your preferred configuration for the toolchain, target system & firmware packages. -
Run
maketo build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.
Related Repositories
The main repository uses multiple sub-repositories to manage packages of
different categories. All packages are installed via the OpenWrt package
manager called opkg. If you're looking to develop the web interface or port
packages to OpenWrt, please find the fitting repository below.
-
LuCI Web Interface: Modern and modular interface to control the device via a web browser.
-
OpenWrt Packages: Community repository of ported packages.
-
OpenWrt Routing: Packages specifically focused on (mesh) routing.
-
OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).
Support Information
For a list of supported devices see the OpenWrt Hardware Database
Documentation
Support Community
- Forum: For usage, projects, discussions and hardware advise.
- Support Chat: Channel
#openwrton oftc.net.
Developer Community
- Bug Reports: Report bugs in OpenWrt
- Dev Mailing List: Send patches
- Dev Chat: Channel
#openwrt-develon oftc.net.
License
OpenWrt is licensed under GPL-2.0