maple/prplos
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
f76c4a8422
prplos/.gitlab/cdrouter.yml
Petr Štetiar e266163bea ci: cdrouter: switch USP testing from STOMP to MQTTv5 as primary MTP 
Currently all CDRouter USP protocol tests in prplOS use STOMP MTP
(100%). This no longer matches the FEAT-63 delivery plan and industry
adoption.

MQTTv5 should become the default MTP for the majority of CDRouter test
runs, while keeping WebSocket and STOMP coverage in some jobs as smaller
regression slices.

So lets switch the shared template to MQTTv5 by default, parameterising
the shipped CDRouter configs instead of cloning them, and adding guarded
DUT init helpers that stop obuspa, install the requested reset file,
clear /etc/obuspa.db, start obuspa again, and wait for the USP data
model to come back.

Use the existing job matrix to keep protocol coverage aligned with the
agreed distribution:

 - Wireless smoke tests use WebSocket
 - prplOS Network Test Plan Candidate jobs use WebSocket
 - IPv6 Top-100+mDNS VLAN jobs use STOMP
 - all remaining jobs use MQTTv5
 - MQTTv3 stays out of scope

References: PCF-1323, PCF-2322
Assisted-by: codex:gpt-5.4:xhigh
Assisted-by: claude:opus-4-6:1m-context
Co-developed-by: Sergio Panseri <sergio.panseri@consult.red>
Co-developed-by: Piotr Nakraszewicz <piotr.nakraszewicz@consult.red>
Signed-off-by: Petr Štetiar <petr.stetiar@prplfoundation.org>
2026-04-21 16:00:15 +01:00

229 lines
9.3 KiB
YAML
Raw Blame History

.cdrouter:
stage: cdrouter
timeout: 40 minutes
image: "$CI_REGISTRY_IMAGE/$CI_DESIGNATED_BRANCH_SLUG/testbed:latest"
rules:
- if: '$CI_PIPELINE_SOURCE == "schedule"'
when: never
- when: manual
variables:
CDROUTER_CONFIG_WIFI_BEACON_PHY: 'ax b g n'
CDROUTER_CONFIG_WIFI_BEACON_RSN_CIPHER: 'CCMP-128'
CDROUTER_CONFIG_WIFI_LAN_CHANNEL: 6
CDROUTER_CONFIG_WIFI_LAN_SSID: 'prplOS'
CDROUTER_CONFIG_USP_CONTROLLER_MTP: mqtt
CDROUTER_CONFIG_USP_CONTROLLER_MTP_ENCRYPTION: 'yes'
CDROUTER_CONFIG_USP_CONTROLLER_DOMAIN: controller.cdroutertest.com
CDROUTER_CONFIG_USP_CONTROLLER_MTP_CERT_PATH: /usr/cdrouter-data/prplos-ci/usp-ssl-certs/server.crt
CDROUTER_CONFIG_USP_CONTROLLER_MTP_CA_CERT_PATH: /usr/cdrouter-data/prplos-ci/usp-ssl-certs/ca.crt
CDROUTER_TEST_CONFIG: generic
CDROUTER_DUT_INIT_USP_MTP_SCRIPT: .gitlab/scripts/dut-init/cdrouter-dut-configure-usp-mqtt.sh
DUT_SLEEP_AFTER_BOOT: 90
TEST_SETUP_TEARDOWN_DURATION: 360
CDROUTER_LAN_INTERFACE: eth1
CDROUTER_WAN_INTERFACE: eth2
CDROUTER_ETH0_MAC_ADDRESS: 00:03:2d:49:2e:d8
CDROUTER_ETH0_MAC_ADDRESS_TESTBED_02: 00:03:2d:49:2e:c8
before_script:
- export TEST_PACKAGE="$(echo $CI_JOB_NAME | sed 's/\(\w\) .*/\1/')"
- .gitlab/scripts/testbed-cdrouter.py package_validate $TEST_PACKAGE
- source .gitlab/scripts/helpers.sh
- section_start "testbed-setup" "Testbed Setup" "collapsed"
- >
if echo "$CI_RUNNER_DESCRIPTION" | grep -q testbed-01; then
sudo etherwake -i $TESTBED_MNG_INTERFACE $CDROUTER_ETH0_MAC_ADDRESS 2> /dev/null
else
sudo etherwake -i $TESTBED_MNG_INTERFACE $CDROUTER_ETH0_MAC_ADDRESS_TESTBED_02 2> /dev/null
fi
- sudo ip link set $TESTBED_LAN_INTERFACE up 2> /dev/null
- sudo ip link set $TESTBED_WAN_INTERFACE up 2> /dev/null
- sleep 10
- mkdir -p ~/.ssh; chmod 700 ~/.ssh
- |
echo "Using firmware image $TFTP_IMAGE_PATH/$TFTP_IMAGE_FILENAME"
cp "$TFTP_IMAGE_PATH/$TFTP_IMAGE_FILENAME" "$TESTBED_TFTP_PATH"
if [ -n "$TFTP_IMAGE_UNPACK_COMMAND" ]; then
echo "Running $TFTP_IMAGE_UNPACK_COMMAND"
eval "$TFTP_IMAGE_UNPACK_COMMAND"
fi
- >
if echo "$CI_RUNNER_DESCRIPTION" | grep -q testbed-02; then
export TB_CONFIG=".testbed/labgrid/testbed-02.yaml"
fi
- section_end "testbed-setup"
- section_start "dut-bringup" "DUT Bringup" "collapsed"
- .gitlab/scripts/testbed-device.py --target $LABGRID_TARGET boot_into shell
- sudo ip link set $TESTBED_WAN_INTERFACE down 2> /dev/null
- >
.gitlab/scripts/testbed-device.py
--target $LABGRID_TARGET check_network
--network lan
--remote-host $TARGET_LAN_TEST_HOST
- sleep $DUT_SLEEP_AFTER_BOOT
- section_end "dut-bringup"
- section_start "dut-system-info" "DUT System Information" "collapsed"
- echo "Waiting for SSH connection availability with ${DUT_SSH_CONNECT_TIMEOUT}sec timeout, with $DUT_SSH_CONNECT_ATTEMPTS attempts..."
- time ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o ConnectionAttempts=$DUT_SSH_CONNECT_ATTEMPTS -o ConnectTimeout=$DUT_SSH_CONNECT_TIMEOUT root@$TARGET_LAN_IP 'exit 0'
- ssh-keyscan $TARGET_LAN_IP >> ~/.ssh/known_hosts 2> /dev/null
- ssh root@$TARGET_LAN_IP 'logger -t CI -p local0.info "System accessible over SSH, $(uptime -p)"' || true
- ssh root@$TARGET_LAN_IP "cat /var/log/messages" > syslog-$LABGRID_TARGET.txt 2> /dev/null || true
- ssh root@$TARGET_LAN_IP "ubus call system board" | tee system-$LABGRID_TARGET.json
- section_end "dut-system-info"
- section_start "dut-init" "DUT Initialization" "collapsed"
- >
if [ -n "${CDROUTER_DUT_INIT_USP_MTP_SCRIPT:-}" ]; then
echo "Running $CDROUTER_DUT_INIT_USP_MTP_SCRIPT";
"${CI_PROJECT_DIR}/$CDROUTER_DUT_INIT_USP_MTP_SCRIPT";
fi
- >
for dut_init_script in $DUT_INIT_SCRIPTS;
do echo "Running $dut_init_script"; "${CI_PROJECT_DIR}/$dut_init_script";
done
- section_end "dut-init"
- section_start "cdrouter-configuration" "CDRouter Configuration" "collapsed"
- >
if echo "$CI_RUNNER_DESCRIPTION" | grep -q testbed-02; then
export CDROUTER_API_TOKEN="$CDROUTER_API_TOKEN_TESTBED_02"
export CDROUTER_CONFIG_WIFI_LAN_CHANNEL=12
export CDROUTER_CONFIG_WIFI_LAN_SSID=prplOS-2g-12
else
export CDROUTER_CONFIG_WIFI_LAN_CHANNEL=6
export CDROUTER_CONFIG_WIFI_LAN_SSID=prplOS-2g-6
fi
- .gitlab/scripts/testbed-cdrouter.py check_connectivity
- .gitlab/scripts/testbed-cdrouter.py package_stop
- .gitlab/scripts/testbed-cdrouter.py wait_for_netif $CDROUTER_LAN_INTERFACE
- .gitlab/scripts/testbed-cdrouter.py wait_for_netif $CDROUTER_WAN_INTERFACE
script:
- source .gitlab/scripts/helpers.sh
- >
if echo "$CI_RUNNER_DESCRIPTION" | grep -q testbed-02; then
export CDROUTER_API_TOKEN="$CDROUTER_API_TOKEN_TESTBED_02"
fi
- export TEST_PACKAGE="$(echo $CI_JOB_NAME | sed 's/\(\w\) .*/\1/')"
- .gitlab/scripts/testbed-cdrouter.py config_import $CDROUTER_TEST_CONFIG
- .gitlab/scripts/testbed-cdrouter.py package_apply $TEST_PACKAGE
- section_end "cdrouter-configuration"
- >
ssh root@$TARGET_LAN_IP 'f=$(logread | grep "procd.*init complete"); echo "${f:-Warning: init is not complete yet,} $(uptime -p)"' || true
- ssh root@$TARGET_LAN_IP 'logger -t CI -p local0.info "Testing starts, $(uptime -p)"' || true
- sudo ip link set $TESTBED_LAN_INTERFACE down 2> /dev/null
- |
TEST_CUTOFF_TIMEOUT=$((CI_JOB_TIMEOUT - DUT_SLEEP_AFTER_BOOT - TEST_SETUP_TEARDOWN_DURATION))
echo "Job timeout: $CI_JOB_TIMEOUT seconds, test cutoff timeout: $TEST_CUTOFF_TIMEOUT seconds"
- section_start "test-execution" "Test Execution" "expanded"
- |
.gitlab/scripts/testbed-cdrouter.py \
package_run $TEST_PACKAGE \
--device generic \
--configuration $CDROUTER_TEST_CONFIG \
--system-info system-$LABGRID_TARGET.json \
--timeout ${TEST_CUTOFF_TIMEOUT} || cdrouter_exit_code=$?
- section_end "test-execution"
- sudo ip link set $TESTBED_LAN_INTERFACE up 2> /dev/null || true
- sudo ip link set $TESTBED_WAN_INTERFACE up 2> /dev/null || true
- sleep 5
- python3 -m cram --verbose .gitlab/tests/cram/post/generic/50-check-for-crashes.t || cram_exit_code=$?
- >
if test -n "$cdrouter_exit_code"; then
log_error "CDRouter exited with $cdrouter_exit_code exit code."
exit "$cdrouter_exit_code"
fi
if test -n "$cram_exit_code"; then
log_error "cram exited with $cram_exit_code exit code."
exit "$cram_exit_code"
fi
after_script:
- >
test -f *-logdir.tgz &&
mkdir -p cdrouter-results &&
tar xf *-logdir.tgz --strip-components=1 --directory=cdrouter-results &&
cat cdrouter-results/final.txt &&
.gitlab/scripts/cdrouter-pretty-failures.awk cdrouter-results/*.txt
- mkdir -p ~/.ssh; chmod 700 ~/.ssh
- >
if echo "$CI_RUNNER_DESCRIPTION" | grep -q testbed-02; then
export TB_CONFIG=".testbed/labgrid/testbed-02.yaml"
fi
- >
ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o ConnectTimeout=15 root@$TARGET_LAN_IP 'exit 0' || {
.gitlab/scripts/testbed-device.py --target $LABGRID_TARGET console_dump_system_state
.gitlab/scripts/testbed-device.py --target $LABGRID_TARGET console_recover_ssh_access
} || true
- ssh-keyscan $TARGET_LAN_IP >> ~/.ssh/known_hosts 2> /dev/null
- ssh root@$TARGET_LAN_IP 'logger -t CI -p local0.info "Testing finished, $(uptime -p)"' || true
- >
ssh root@$TARGET_LAN_IP exit && {
ssh root@$TARGET_LAN_IP ps > processes-$LABGRID_TARGET.txt
ssh root@$TARGET_LAN_IP dmesg > dmesg-$LABGRID_TARGET.txt
ssh root@$TARGET_LAN_IP "cat /var/log/messages" > syslog-$LABGRID_TARGET.txt
ssh root@$TARGET_LAN_IP opkg list > opkg_list-$LABGRID_TARGET.txt
script --quiet --command "ssh -t root@$TARGET_LAN_IP /bin/getDebugInformation --all"
scp -r root@${TARGET_LAN_IP}:/tmp/debug-*_all.tar.gz . > /dev/null
scp -r root@${TARGET_LAN_IP}:/etc etc > /dev/null
scp -r root@${TARGET_LAN_IP}:/tmp/beerocks/logs prplmesh_beerocks_logs > /dev/null
} || true
- .gitlab/scripts/testbed-device.py --target $LABGRID_TARGET power off
- mv console_$LABGRID_TARGET console_$LABGRID_TARGET.txt || true
- tar xzf debug-*_all.tar.gz || true
- mv debug-*.txt debug-information-$LABGRID_TARGET.txt || true
- ( [ $(tar -tf coredumps_all.tar.gz | wc -l) -eq 0 ] && rm coredumps_all.tar.gz || true ) 2>/dev/null
- mv coredumps_all.tar.gz coredumps-$LABGRID_TARGET.tar.gz 2> /dev/null || true
- >
if echo "$CI_RUNNER_DESCRIPTION" | grep -q testbed-02; then
export CDROUTER_API_TOKEN="$CDROUTER_API_TOKEN_TESTBED_02"
fi
- .gitlab/scripts/testbed-cdrouter.py package_stop
artifacts:
expire_in: 1 month
when: always
paths:
- cdrouter-results
- etc
- prplmesh_beerocks_logs
- debug-information-$LABGRID_TARGET.txt
- processes-$LABGRID_TARGET.txt
- dmesg-$LABGRID_TARGET.txt
- syslog-$LABGRID_TARGET.txt
- system-$LABGRID_TARGET.json
- console_$LABGRID_TARGET.txt
- opkg_list-$LABGRID_TARGET.txt
- coredumps-$LABGRID_TARGET.tar.gz
Reference in New Issue View Git Blame Copy Permalink