ffff4ed676
The LCM bridge carrier reflects whether its container-side port is live. Split execution can inspect it before the LCM suite tears that state down, so the bridge can appear either live or without carrier. Carrier state is not the route line's only variable part: ip route also emits a trailing separator. Account for that separator after the optional linkdown flag so both carrier states match. Accept both observed route and link forms in every board's copy of the affected expectations while keeping every address, interface attribute, and the carrier-to-state pairing constrained. Assisted-by: codex:gpt-5 Assisted-by: claude:opus-5:orchestrator Assisted-by: codex:gpt-5.6-sol:medium-fast References: CI-7 Signed-off-by: Petr Štetiar <petr.stetiar@prplfoundation.org>
54 lines
4.6 KiB
Perl
54 lines
4.6 KiB
Perl
Create R alias:
|
|
|
|
$ alias R="${CRAM_REMOTE_COMMAND:-}"
|
|
|
|
Check correct routing table:
|
|
|
|
$ R ip route
|
|
default via 10.0.0.1 dev eth1 proto static
|
|
10.0.0.0/24 dev eth1 proto kernel scope link src 10.0.0.2
|
|
192.168.1.0/24 dev br-lan proto kernel scope link src 192.168.1.1
|
|
192.168.2.0/24 dev br-guest proto kernel scope link src 192.168.2.1 linkdown
|
|
192\.168\.3\.0/24 dev br-lcm proto kernel scope link src 192\.168\.3\.1( linkdown)? (re)
|
|
|
|
Check correct interface setup:
|
|
|
|
$ R "ip link" | awk '/^[0-9]+:/ { printf $0; next } { print ";"$2 }' | awk '/lo:/{print} !/00:00:00:00:00:00/{print}' | grep -v 'wwan0' | cut -d\; -f1 | cut -d: -f2- | LC_ALL=C sort
|
|
|
|
br-guest: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000
|
|
br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
|
|
br-lcm: <(NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN|BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN) mode DEFAULT group default qlen 1000 (re)
|
|
cpu0_0_0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
cpu0_1_0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
cpu1_2_0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
cpu1_3_0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
eth0_1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq master br-lan state DOWN mode DEFAULT group default qlen 1000
|
|
eth0_2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq master br-lan state DOWN mode DEFAULT group default qlen 1000
|
|
eth0_3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master br-lan state UP mode DEFAULT group default qlen 1000
|
|
eth0_4: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq master br-lan state DOWN mode DEFAULT group default qlen 1000
|
|
eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
|
|
gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
ip6gre0@NONE: <NOARP> mtu 1448 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
lo: <LOOPBACK,UP,LOWER_UP> mtu 65535 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
|
|
lpdev0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UNKNOWN mode DEFAULT group default qlen 1000
|
|
mxl_vpn: <> mtu 9266 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
teql0: <NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 100
|
|
tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
wlan0.1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop master br-lan state DOWN mode DEFAULT group default qlen 1000
|
|
wlan0.2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop master br-guest state DOWN mode DEFAULT group default qlen 1000
|
|
wlan0.3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
wlan1: <(NO-CARRIER,)?BROADCAST,MULTICAST(,UP)?> mtu 1500 qdisc (noqueue|noop) master br-lan state DOWN mode (DORMANT|DEFAULT) group default qlen 1000 (re)
|
|
wlan2.1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop master br-lan state DOWN mode DEFAULT group default qlen 1000
|
|
wlan2.2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop master br-guest state DOWN mode DEFAULT group default qlen 1000
|
|
wlan2.3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
wlan2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
wlan3: <(NO-CARRIER,)?BROADCAST,MULTICAST(,UP)?> mtu 1500 qdisc (noqueue|noop) master br-lan state DOWN mode (DORMANT|DEFAULT) group default qlen 1000 (re)
|
|
wlan4.1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop master br-lan state DOWN mode DEFAULT group default qlen 1000
|
|
wlan4.2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop master br-guest state DOWN mode DEFAULT group default qlen 1000
|
|
wlan4.3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
wlan4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
|
|
wlan5: <(NO-CARRIER,)?BROADCAST,MULTICAST(,UP)?> mtu 1500 qdisc (noqueue|noop) master br-lan state DOWN mode (DORMANT|DEFAULT) group default qlen 1000 (re)
|