In c16f6121920259fc7d35274e507ea13c053b3872 (profiles: thread: add lrzsz for EFR32MG firmware updates)
the package lrzsz was added to the thread profile.
Tests were adapted accordingly, however the thread profile is currently only build for wnc-freedom in the CI.
So let's remove the CONFIG_PACKAGE_lrzsz=y from the expected output for all other targets.
Signed-off-by: Matthias Franck <matthias.franck@softathome.com>
Currently ethtool is enabled in UPDK, ethtool-full package is needed
by tr181-sfp manager, both can not exist at same time.
Hence enabling ethtool-full package and removing ethtool.
Signed-off-by: Bhavesh Bharadiya <bnbharadiya@maxlinear.com>
Integrates:
222056c ("Issue: NET-6251 [SSH] Make getDebug working with non-root ssh user.", 2024-11-08)
4afd728 ("tr181 compliance: make Alias's write once to be v2.17 compliant (HOP-7769/PCF-1488)", 2024-11-25)
a9aa6b0 ("tr181 compliance: set VendorLogFileRef based on DeviceInfo (HOP-7769/PCF-1488)", 2024-11-29)
References: PCF-1488
Signed-off-by: Matthias Franck <matthias.franck@softathome.com>
EFR32MG bootloader supports firmware updates via X-MODEM protocol. So
until a special firmware update tool is available, we can use picocom
with lrzsz to perform firmware updates.
Example flashing session on Freedom board:
$ picocom --baud 115200 /dev/ttyMSM1 --send-cmd "sz --verbose --verbose --xmodem"
...snip...
Gecko Bootloader v2.05.02
1. upload gbl
2. run
3. ebl info
BL >
begin upload
CCC
---> [CTRL+a] [CTRL+s] key combination starts sending the file to the bootloader
*** file: /tmp/wnc_freedom_openthread_rcp_2.5.2.0_GitHub-1fceb225b_gsdk_2024.6.2.gbl
$ sz --verbose --verbose --xmodem /tmp/wnc_freedom_openthread_rcp_2.5.2.0_GitHub-1fceb225b_gsdk_2024.6.2.gbl
Sending /tmp/wnc_freedom_openthread_rcp_2.5.2.0_GitHub-1fceb225b_gsdk_2024.6.2.gbl, 860 blocks: Give your local XMODEM receive command now.
...snip...
Bytes Sent: 110208 BPS:11013
References: PCF-1296, PCF-1535
Signed-off-by: Petr Štetiar <petr.stetiar@prplfoundation.org>
- Update the tests with expected new entries in the datamodel
- Update configuration with expected new config options
Signed-off-by: Matthias Franck <matthias.franck@softathome.com>
The tun driver is necessary for Thread to work,
since openthread border router creates a tun interface
for the Thread radio.
This profile contain the dependencies of the thread container
References: PCF-1041
Signed-off-by: Nabil BIZID <nabil.bizid@softathome.com>
This option was used while setting a static networklayout. We removed the static networklayout file an no longer need this options
Signed-off-by: Toon Caeyers <toon.caeyers_ext@softathome.com>
Issue:
Ethernet CPE aliases are now based on the DTS. This add tests to verify this behavior.
Issue: HOP-7720 (PCF-1245) - [ethernet-manager] use device tree to create alias for default interfaces
Signed-off-by: Xavier Dooms <xavier.dooms_ext@softathome.com>
- Implements the feature to parse the kernel DeviceTree to collect the physical name of an Ethernet port by its “aliases” parameter and set relevant aliases to cpe-<name>
- Removes the static networklayout in favor of the auto generated one
Integrated: PCF-1245 - Physical Ethernet Port Naming
Signed-off-by: Toon Caeyers <toon.caeyers_ext@softathome.com>
In the current DTS, the aliases ethernet path /soc/dp* is incorrect.
The proper path would be /soc@0/dp*.
And also revise the output of the Ethernet port netdev names.
References: PCF-1552
Signed-off-by: Tim Hsu <tim.hsu@wnc.com.tw>
Signed-off-by: Oguzhan Kara <oguzhan.kara@softathome.com>
Integrates removing crun/oci bundle components from feed lcm
as they are not yet officially accepted.
Signed-off-by: Nabil BIZID <nabil.bizid@softathome.com>
mod-busstats allows to fetch the statistics on usage of the inter-process communication bus connections of a component.
References: PCF-1679, PCF-1680
Signed-off-by: Matthias Franck <matthias.franck@softathome.com>
Integrates the following changes:
* mod-amxb-usp: bump to v5.3.0
- b600f54 ("amxb_usp: Implement USP backend statistics(PCF-1680)", 2025-01-13)
- 42fae84 ("Amx backend: RPC to reset a plugin statistics(PCF-1679)", 2025-02-11)
* mod-busstats: add package
Introduces the mod-busstats package.
mod-busstats allows to fetch the statistics on usage of the inter-process communication bus connections of a component.
* libamxb: bump to v4.12.0
- e2d537d ("Amx backend: RPC to reset a plugin statistics(PCF-1679)", 2025-02-11)
* mod-amxb-ubus: bump to v3.9.0
- 96ef54b ("Amx backend: RPC to reset a plugin statistics(PCF-1679)", 2025-02-11)
References: PCF-1679, PCF-1680
Signed-off-by: Matthias Franck <matthias.franck@softathome.com>
- Intergrate the data distribution feature
- Adjust cram test so we check the corresponding socket creation
Closes: PPM-3042
Signed-off-by: Houssem Dafdouf <houssem.dafdouf_ext@softathome.com>
kernelfaults module will retrieve panics and oops form pstore.
64 KiB reserved for ramoops/pstore
References: PCF-1442
Signed-off-by: Tim Hsu <tim.hsu@wnc.com.tw>
The order of the dict output is none deterministic and changed with ambiorix upstep, requiring a slight reorder of the expected output
Signed-off-by: Toon Caeyers <toon.caeyers_ext@softathome.com>
This commit adds two new default config options that allow to disable the run as non root feature in libamxrt:
CONFIG_FORCE_RUNNING_AS_ROOT: Enabled by default, this option disables the
feature in the code and makes sure that, even if components request to
run as a different user, it is not possible.
CONFIG_REMOVE_CAPS_ODLS: Enabled by default, this option removes
the default capability files during the first boot. This will also make
all the plugins run as root. The feature will look for all odls in
/etc/amx and subdirectories matching *_caps.odl.
Issue: PPW-185 - Need a way to force plugins to run as root
Signed-off-by: Toon Caeyers <toon.caeyers_ext@softathome.com>
New version of DHCPv6Client provide proper data model for DHCPv6 Retransmission parameters. These should not be expected in the obuspa output
References: PCF-1624
Signed-off-by: Toon Caeyers <toon.caeyers_ext@softathome.com>
* The rework of dhcpv6client and odhcp6c to use ubus events instead of scripts, adds the CONFIG_ODHCP6C_ENABLE_UBUS option that needs to be set to actually use the events. This option now shows up in the test output
Issue: PCF-1541 - Update client via ubus event instead of script
Signed-off-by: Toon Caeyers <toon.caeyers_ext@softathome.com>
* The wan-manager enhancements introduced some new parameters in wan-manager. These parameters should now be expected by the obuspa test
References: PCF-1589
Signed-off-by: Toon Caeyers <toon.caeyers_ext@softathome.com>
wan-manager and mod-autosensing upsteps
Integrates:
-6e0dd527 ("Autosensing: Query Physical interface changes and inform AS module (PCF-1589)", 2025-03-16)
-b818cd7a ("Unit test: Changes for AS policies development (PCF-1589)", 2025-03-16)
-e8518dee ("AS Policies: Add Sticky policy and restart autosense when interface changes (PCF-1589)",2025-03-14)
-f811c1de ("Unit test: Add test data for autosensing priority (PCF-1589)",2025-03-14)
-9cfc267a ("Priority: Add concept of priority (PCF-1589)", 2025-03-14)
-b22dbdb9 ("PhysicalReference: Fix default values",2025-03-14)
-2641813e ("Unit test: Change unit tests for PhysicalReference parameter",2025-03-14)
-c340e8a0 ("Unit test: Improve mocking of NetModel",2025-03-14)
-de8632e0 ("PhysicalReference: Introduce new parameter",2025-03-14)
-27a936ee ("DSLite: Enable PCP when activating DSLite WANMode (PCF-1588)",2025-03-10)
-82b293c5 ("getCurrentWANModeStatus: Remove function (PCF-1588)",2025-02-19)
-97bb4ed2 ("Unit test: Improve checks after setting WAN Modes (PCF-1588)",2025-02-19)
-3a371950 ("Unit test: Add unit test cases + adapt existing unit tests for multiple wan modes (PCF-1588)",2025-02-19)
-6bcb56e5 ("Multiple WAN Modes: Allow multiple WAN Modes at same time (PCF-1588)",2025-02-19)
-7b06cb1e ("Cleanup: Improve ip version variables and remove hardcoded paths (PCF-1588)",2025-02-19)
References: PCF-1132, PCF-1588, PCF-1589, PCF-1695
Signed-off-by: Toon Caeyers <toon.caeyers_ext@softathome.com>
This upstep will integrate the following tickets :
- PPW-410 - Invalid BTM Target BSSID in Client Steering BTM Report
message
- PPM-3180 - add Wildcard BSSID in BTM request
- PPW-404 - Backhaul BSS configuration is not set correctly in
Fronthaul BSS during EM test
- PPW-349 - [Terminating dot][tr181] fix WiFi.EndPoint
- PPW-448 - pwhm: mlo: fix AssociatedDevice bad behavior
References: PPW-410,PPM-3180,PPW-404,PPW-349,PPW-448
Signed-off-by: Houssem Dafdouf <houssem.dafdouf_ext@softathome.com>
Integrates:
abaa3357 - Update autogenerated files
b2ebfd04 - Fill the “IPAddressUsed ” parameter for both ping and traceroute data model
15e76530 - TraceRoute: Calculate and fill the “responsetime” parameter
57815c95 - mod-ipd-iperf: Fill the “IPAddressUsed” parameter
a2e31170 - mod-ipd-ping: Check the ping DataBlockSize maximum value to ensure the ping command is workable
d221d563 - mod-ipd-ping: change the ping timeout option and convert from miliseconds to seconds for the timeout value
0fafd4f9 - ODL: Update trace-zones config
References : PPW-127
References : PPW-128
References : PPW-129
References : PPW-130
References : PPW-137
References : PPW-178
Signed-off-by: Toon Caeyers <toon.caeyers_ext@softathome.com>
After enabling the oopsmonitor, some new objects are available in the obuspa output. The test should now expect these objects as well
Issue: PCF-1060 - New component to manage kernel oops
Signed-off-by: Toon Caeyers <toon.caeyers_ext@softathome.com>
After enabling the oopsmonitor, some new objects are available in the datamodel. The test should now expect these objects as well
Issue: PCF-1060 - New component to manage kernel oops
Signed-off-by: Toon Caeyers <toon.caeyers_ext@softathome.com>
* After enabling the oopsmonitor, new config options are expected to be set
Issue: PCF-1060 - New component to manage kernel oops
Signed-off-by: Toon Caeyers <toon.caeyers_ext@softathome.com>
Problem: Cram tests should be added to check faultmonitor dm
Issue: PCF-1665 [oopsmonitor][cram] add cram test
Signed-off-by: Ward Lindekens <ward.lindekens_ext@softathome.com>
Integrates:
-5b21cdf8 ("oopsmonitor: sendfile() call should be replaced by normal read/write loop (PPW-388)", 2025-02-12)
References: PPW-388
Signed-off-by: Hela Saadani <hela.saadani_ext@softathome.com>
Currently swpal_6x-uci package fails to compile randomly with following error:
src/uci_wrapper.c:20:10: fatal error: libubus.h: No such file or directory
20 | #include <libubus.h>
| ^~~~~~~~~~~
This was caused by missing dependency on libubus, which could result in a race
condition during the build process. It seems that both the ubus package and
swpal_6x-uci are being compiled simultaneously on different CPU threads. As a result,
the ubus headers might be installed later than needed by swpal_6x-uci,
leading to this very sporadic build failure.
This update fixes the issue by providing explicit package dependency on libubus.
Fixes: PCF-1693
Signed-off-by: Bhavesh Bharadiya <bnbharadiya@maxlinear.com>
Signed-off-by: Petr Štetiar <petr.stetiar@prplfoundation.org> [Jira ticket fix]
This reverts commit b538acc374efbf561873ea4421afd6e9592a7d47.
Endpoints are enabled in UPDK 9.1.80 so enabling the check for endpoint
interfaces in cram tests.
Signed-off-by: Bhavesh Bharadiya <bnbharadiya@maxlinear.com>
* Updated build-config cram test since new configs are available in UPDK 9.1.80.
* Updated network, wifi and bridging-guest tests to include EP interfaces.
* Updated ubus test since model name is changed for OSPv2 in UPDK 9.1.80.
* CDRouter configuration includes expected 'be' phy mode in the beacons on OSPv2
Signed-off-by: Bhavesh Bharadiya <bnbharadiya@maxlinear.com>
Signed-off-by: Petr Štetiar <petr.stetiar@prplfoundation.org> [squash, OSPv1 tests]
Currently swpal_6x-uci package fails to compile randomly with following error:
src/uci_wrapper.c:20:10: fatal error: libubus.h: No such file or directory
20 | #include <libubus.h>
| ^~~~~~~~~~~
This was caused by missing dependency on libubus, which could result in a race
condition during the build process. It seems that both the ubus package and
swpal_6x-uci are being compiled simultaneously on different CPU threads. As a result,
the ubus headers might be installed later than needed by swpal_6x-uci,
leading to this very sporadic build failure.
This update fixes the issue by providing explicit package dependency on libubus.
Fixes: PCF-1391
Signed-off-by: Bhavesh Bharadiya <bnbharadiya@maxlinear.com>
With serdes power saving feature LAN ports take time to come up.
LAN port takes more than 7 seconds to come up.
Disabling it since due to this prplmesh tests are failing.
Signed-off-by: Bhavesh Bharadiya <bnbharadiya@maxlinear.com>
Currently the CDRouter VLAN tests are failing with:
FAIL: Could not establish IPv4 DHCP address on lan » no-lan-dhcp-address
This is happening as the UPDK 9.1.80 upstep changes the value of the
model variables in the device tree:
* OSPv1: from `mxl,lightning mountainmxl,lgp` to `mxl,osp-tb341`
* OSPv2: from `mxl,lightning mountainmxl,octopusmxl,octopus-641` to `mxl,osp-tb341-v2`
and thus the DUT VLAN configuration is unable to detect the board
properly and configure the VLAN on the the correct LAN port properly.
So lets adapt the board identification in the VLAN configuration to the
new device tree model variables.
Fixes: 45d2f1fcccc7 ("profiles: mxl_x86_osp_tb341_v2: update to UPDK 9.1.80")
Signed-off-by: Petr Štetiar <petr.stetiar@prplfoundation.org>
