5G modem (Quectel RM520N-GL) is not working on Freedom with ATH13.1CS.
Qualcomm is handling the fix via a separate SF ticket.
Disable 5G modem PCI/USB checks in 015-platform.t and skip
50-cellular-offline.t on Freedom DUT board.
While at it, fix the copy&pasta in the test description and remove
OSPv1.
References: PCF-2306
Signed-off-by: Petr Štetiar <petr.stetiar@prplfoundation.org>
mac80211: Fix invalid-link_id-usage in ieee80211_stop_mbssid
* Set netdev_going_down flag only when link_id it not set
Fixes: PCF-2348
Signed-off-by: Cihangir Odabas <cihangir.odabas@prplfoundation.org>
1. Add MODPARAMS.ath12k:=cold_boot_cal=0 in ath.mk to override the
default value (1) and disable cold boot calibration.
2. Fix ath12k_dyn_dbg_enable.sh to preserve existing module parameters
when adding dyndbg=+p. The original implementation would overwrite
all parameters specified via MODPARAMS in ath.mk.
The script now:
- Reads the existing first line from /etc/modules.d/ath12k
- Skips modification if dyndbg=+p is already present
- Inserts dyndbg=+p after 'ath12k' while preserving existing parameters
like cold_boot_cal=0
Fixes: PCF-2346
Signed-off-by: Marvin Lu <marvin.lu@wnc.com.tw>
1. Rewrite the detection logic to reduce the time spent waiting for
wireless UCI to become ready. This improves startup time.
2. Set uci option wireless.vendor.phy_detect_timeout = 0 to skip PHY
detection. In ATH13.1CS, the wireless UCI being ready implies the
Wi-Fi driver is already initialized, so explicit PHY detection is
redundant and can be safely skipped.
Fixes: PCF-2346
Signed-off-by: Marvin Lu <marvin.lu@wnc.com.tw>
Changes in !1920 (c66bc572) introduced issues with longer boot times.
CI tests failed because the board was not ready within the 80 second
timeout.
pexpect.exceptions.TIMEOUT: Timeout of 80 seconds exceeded during waiting for login
Increase login_timeout by 40 seconds (from 80s to 120s) for both
wnc-freedom-initramfs and wnc-freedom-emmc targets to accommodate
the longer boot times.
References: PCF-2346
Link: https://gitlab.com/prpl-foundation/prplos/prplos/-/jobs/12946876755#L73
Signed-off-by: Petr Štetiar <petr.stetiar@prplfoundation.org>
Add null checks for TTLM context in MBSSID element generation and length
calculation to prevent crashes when processing mixed MLD and legacy BSS
configurations.
The code accessed TTLM structures without verifying the BSS was
configured as an MLD AP, causing null pointer dereferences with legacy
BSSes. The fix validates both mld_ap config and mld structure before
accessing TTLM fields.
Fixes hostapd_eid_mbssid_elem_len() and hostapd_eid_mbssid_elem().
Fixes: PCF-2270
Signed-off-by: Marvin Lu <marvin.lu@wnc.com.tw>
* Add Multi-AP profile and VLAN ID tracking
Add support for tracking and reporting Multi-AP profile and primary
VLAN ID information in wpa_supplicant. This information is extracted
from the Multi-AP IE in association responses and included in the
connection event messages.
Changes:
- Store Multi-AP profile and primary VLAN ID from association response
- Add new fields to wpa_supplicant structure for tracking these values
- Include Multi-AP profile and VLAN ID in WPA_EVENT_CONNECTED messages
- Add debug logging for Multi-AP profile and VLAN ID values
- Reset values on new association attempts
This enables upper layer applications to be aware of the Multi-AP
configuration and VLAN segmentation being used, which is essential
for proper EasyMesh network management and monitoring.
Fixes: PCF-2290
Signed-off-by: Marvin Lu <marvin.lu@wnc.com.tw>
Extend the PHY detection timeout so the automatic wireless uci
generation completes reliably.
Remove /etc/hotplug.d/ieee80211/10-wireless-freedom which was added as a
static fallback because automatic UCI generation failed on prplos
ATH13.0CS.
References: PCF-1963
Signed-off-by: Marvin Lu <marvin.lu@wnc.com.tw>
Add package wifi-scripts and wifi-helper-scripts to support automatic wireless uci generation.
References: PCF-1963
Signed-off-by: Marvin Lu <marvin.lu@wnc.com.tw>
Allow BA sessions to persist across link changes by
calling drv_ampdu_action() for ADDBA updates when
SUPPORTS_REORDERING_BUFFER is set. Mark ADDBA Request/Response frames as
link-agnostic per IEEE 802.11be Draft 7.0.
Fixes: PCF-2132
Signed-off-by: Marvin Lu <marvin.lu@wnc.com.tw>
Currently, with MBO and WPS combination, during initial WPS association,
association request will not contain RSN IE and hence parsing that will
be skipped correctly. But, for MBO, management frame protection(MFP) is
mandatory. Since, RSN IE not sent during initial WPS assoc, station
flags will not have MFP set, which is leading to rejecting the assoc
request from the client.
Since, WPS association request will not have the RSN IE, skip the MFP
check when WPS IE is set and proceed with association. This will be
skipped only for the WPS association, for other request(s), usual
validations will be followed.
References: PPW-1255, PPW-1352, QCA-08265364
Signed-off-by: Marvin Lu <marvin.lu@wnc.com.tw>
1. Update the QCOM BSP to ATH13.1CS
2. Add the following packages/configuration into prplos build per
Qualcomm's ATH13.1CS release for prplos:
kmod-qca-nss-ppe-pppoe-mgr
kmod-qca-nss-ppe-gre-mgr
kmod-qca-mdio
kmod-qca-nss-ppe-ath-clients
kmod-qca-wifi-nss-plugins
CONFIG_BUSYBOX_CONFIG_DEVMEM=y
Signed-off-by: Marvin Lu <marvin.lu@wnc.com.tw>
When CONFIG_KERNEL_DYNAMIC_DEBUG is disabled in the build configuration,
several nss packages fail to compile due to unused variable warnings
being treated as errors.
This commit applies patches to fix compilation issues in the following
packages from feed-qca:
- qca-nss-ppe
- qca-nss-gre-mgr
- qca-nss-ppe-clients
- qca-nss-dscpstats
The patches mark debug-only variables with __maybe_unused attribute and
add missing header includes, allowing these packages to compile
successfully regardless of the CONFIG_DYNAMIC_DEBUG setting.
CONFIG_KERNEL_DYNAMIC_DEBUG is also removed from the build configuration
.
Closes: PCF-2135
Closes: PCF-2136
Closes: PCF-2137
Closes: PCF-2138
Signed-off-by: Marvin Lu <marvin.lu@wnc.com.tw>
Currently, the AP update operation is not correctly updating new SSID.
This issue arises because the NL80211_CMD_UPDATE_AP command does not
process its NL80211_ATTR_SSID attribute. Resolve this issue by ensuring
that the SSID is updated if it is provided with the
NL80211_CMD_UPDATE_AP command.
Fixes: PPW-1127
Signed-off-by: Marvin Lu <marvin.lu@wnc.com.tw>
After upgrading to latest-24.10, ingress STP frames (destination MAC
01:80:c2:00:00:00) were missing on Wi-Fi.
Root cause:
The ath12k driver reports some packets with LLC headers (length <
0x0600) as DP_RX_DECAP_TYPE_8023 in the RX descriptor. However, these
packets were not properly handled because the RX_FLAG_8023 flag was not
set. As a result, mac80211 misinterpreted these packets, leading to
dropped STP frames.
Solution:
This patch adds support for DP_RX_DECAP_TYPE_8023 by setting the
RX_FLAG_8023 flag in the RX path. This ensures STP frames and other
IEEE 802.3 packets are correctly processed and received on WiFi
interfaces.
Fixes: PPW-1125
Signed-off-by: Marvin Lu <marvin.lu@wnc.com.tw>
- add support for Quectel RM520N using MHI over PCIe
Add a DTS property to support 16 MSIs for four-slot PCIe.
To support four-slot PCIe, the number of MSI interrupts is changed to 16 for PCIe0 and PCIe1.
Currently 96 MSI interrupts has been used for three slot PCI.
To support four slot PCI, number of MSI has to be split in below order
PCIe0 - 16,
PCIe1 - 16,
PCIe2 - 32,
PCIe3 - 32
Made changes to configure the MSI dynamically based on the DTS
property in PCI node. Based on the number of MSI corresponding
ring mask will be taken for DP grouping.
- Enable CONFIG_PSTORE_RAM
kernelfaults module will retrieve panics and oops form pstore.
64 KiB reserved for ramoops/pstore
- add support for EFR32MG
Enable UART and I/O expander to support ATH13.0 for EFR32MG on the Freedom board.
- add support for LED driver
The I2C multiplexer TCA9548A is connected to the I2C3 bus. The I/O expander TCA6416A is connected to channel 5 of the I2C multiplexer TCA9548A and is controlled by GPIO17/18 for interrupt and reset. The LED driver LP5562 is connected to the I2C3 bus and enabled by GPIO13 of the I/O expander TCA6416A. The LED driver LP5562 controls one RGB LED and one white LED. Set up the system indicator lights.
Signed-off-by: Tim Hsu <tim.hsu@wnc.com.tw>
The builds for Freedom using ATH13.1ED BSP are currently failing with
following error:
bash: line 1: spatch: command not found
This is happening as the mac80211 package is modifying the source code
tree another time to amend the kzalloc/kmalloc usage for memory
debugging use case.
It should be handled with existing tools, it is currently being
addressed internally, but in the meantime we're going to demand
spatch/coccinelle for the build.
References: PCF-2142
Link: https://gitlab.com/prpl-foundation/prplos/prplos/-/jobs/11783721716#L9686
Signed-off-by: Petr Štetiar <petr.stetiar@prplfoundation.org>
Remove the following unnecessary options from the build configuration:
- CONFIG_BUSYBOX_CONFIG_USLEEP=y
- CONFIG_BUSYBOX_CONFIG_BLOCKDEV=y
- CONFIG_KERNEL_CPU_FREQ_THERMAL=y
- CONFIG_KERNEL_DEBUG_ATOMIC_SLEEP=y
- CONFIG_KERNEL_DEVMEM=y
Signed-off-by: Marvin Lu <marvin.lu@wnc.com.tw>
The Ethernet LAN ports were non-functional, preventing LAN devices from
reaching the Freedom board or accessing the Internet through its LAN
ports.
Updated the Freedom device tree to resolve this issue.
Fixes: PCF-2108
Signed-off-by: Marvin Lu <marvin.lu@wnc.com.tw>
Resolved an issue where a Multi-AP Wi-Fi connection could not be
established between a Multi-AP AP device and a Multi-AP station device
on ATH13.1ED.
This fix incorporates QCA's patch, which addresses the connection
failure and enables successful Multi-AP communication between AP and
station devices.
Fixes: PCF-2109
Signed-off-by: Marvin Lu <marvin.lu@wnc.com.tw>
Update the QCOM BSP to ATH13.1ED for qca_ipq95xx profile.
Known issues:
Ethernet LAN ports do not work.
Multi-AP Wi-Fi connection fails.
Ethernet WAN port is functional.
References: PCF-2042
Signed-off-by: Marvin Lu <marvin.lu@wnc.com.tw>
Signed-off-by: Petr Štetiar <petr.stetiar@prplfoundation.org> [rebase, cram]
Update prplMesh-related cram tests and helper scripts to control prplMesh
via ProcessManager DM (ba-cli) instead of init.d mode helpers.
Key updates:
- use PrplMesh.{Enable,ManagementMode,CertificationMode} in test setup/teardown
- adjust DUT init script for controller mode via ProcessManager
- extend generic ubus datamodel expected list with prplMesh/controller objects
Closes: PPM-3589
Signed-off-by: Igor Plesser <i.plesser@inango-systems.com>
Replace prplmesh_utils.sh status checks in cram tests with
prplmesh_cli status output parsing/validation.
Closes: PPM-3671
Signed-off-by: Igor Plesser <i.plesser@inango-systems.com>
This reverts commit 8159c85df4 as the
underlying issue is being fixed in commit d825d78cef1f ("profiles:
OSPv2: update wlan profile to fix EMR5 wireless onboarding issues")
References: PPW-1480, PCF-2395
Signed-off-by: Petr Štetiar <petr.stetiar@prplfoundation.org>
Update mxl_wlan_hostap_ng_wav700 profile for below changes:
* WPS Authentication failure which is blocking EMR5 wireless onboarding
* Unset MLD Unit for backhaul VAPs created by prplmeshVapsConfiguration
Fixes WPS Authentication failure which is blocking EMR5 wireless
onboarding.
Fixes: PCF-2395
Signed-off-by: Bhavesh Bharadiya <bnbharadiya@maxlinear.com>
Signed-off-by: Petr Štetiar <petr.stetiar@prplfoundation.org> [Fixes tag]
Integrates following changes:
tr181-dns:
-Improve tr181-dns for unbound 1.24 (PPW-1174) (fc909d79)
mod-dns-unbound:
-unbound upstep: Refactor module to be compatible with unbound 1.24.1 (cdb0b6ad)
unbound:
-bind listen socket to interface (af0c144e)
-support failover mechanism (9e01feea)
-add support for the server configuration option 'private-exception'(9471d07c)
-config option: outbound-msg-timeout(ccd9e6ec)
-RFC 6525 4.4.1: Don't forward TCP queries over UDP (ec56c7ed)
-add bus connection to Unbound using libamx*(1db1f351)
-fix build on non-linux systems (2bff5475)
References: PPW-1174
Signed-off-by: prplbot <bot@prplfoundation.org>
We’ve recently started seeing some authentication issues with the Coverity server.
So, per Coverity support's advice, we should avoid using the admin account in CI and use a regular Coverity user instead.
So let's configure the prplbot credentials as the Coverity user that commits issues to the Coverity server.
References: PCF-2428
Signed-off-by: Mouna ALOUI <mouna.aloui@softathome.com>
